University of Wisconsin-Extension
The
best advice on tillage during a drought may be: avoid it.
When soils are dry, you should do everything you can to conserve
remaining moisture. This may mean holding off on plowing,
disking and cultivating so as not to disturb soils and let
moisture escape in the process. Keep in mind that any operation
that brings soil up to the surface may worsen conditions.
The
guidelines at right offer some general considerations. For
advice specific to your crops and drought conditions, contact
your county Extension agent.
- Minimum
tillage. Try to use minimum tillage techniques if possible.
These will leave crop residue from the preceding year on
the surface, thereby reducing evaporation of moisture from
the soil. Conservation tillage may be a particularly good
method because it leaves more than 30 percent of the residues,
such as old cornstalks, in fields after planting.
- Weed
control. Use chemical weed control, rather than tillage,
to manage weeds. With chemical weed control, you avoid disturbing
the soil and causing moisture loss.
- Planting.
While it helps to plant in the moist soil below the
dry surface, don't plant beyond the maximum recommended
depth for your crop.
- Tilling.
If you must till, keep it at a shallow level. For example,
when field cultivating, use a depth of 2 to 3 inches, rather
than 4 to 5. Do not subsoil.
- Chisel
plowing. If using a chisel plow, use sweeps instead
of twisted shovels on it. The sweeps bring up less soil,
while leaving more crop residue on the soil surface. As
a result, less moisture is lost from the soil.
Additional resources:
Your county agricultural agent
Related publications:
UW-Extension publications-
"Planting for Conservation Tillage," (A3396);
"Row Crop Cultivators," (A3483); "Optimum Corn Planting Practices," (A3264);
"Conservation Tillage for Corn," (A3091);
"Making Conservation Tillage Work for Corn Production on Your Soil Type," (A3386);
"Managing Drought-Stressed Corn and Soybeans," (NCR238).
Disclaimer
and Reproduction Information: Information in NASD does not represent
NIOSH policy. Information included in NASD appears by permission
of the author and/or copyright holder. More
NASD Review: 04/2002
|