Federal Register Document Drafting Handbook October 1998 Revision Chapter 2: How do I write a document for the rules category? 2.1 What types of documents go in the rules category? 2.2 What are the requirements for a document in the rules category? Billing Code 2.3 What is a billing code and how do I get one? Headings 2.4 What information should go in the headings section at the beginning of my rule? Preamble 2.5 What are the preamble requirements for a document in the rules category? AGENCY caption ACTION caption SUMMARY caption DATES caption ADDRESSES caption FOR FURTHER INFORMATION CONTACT caption SUPPLEMENTARY INFORMATION caption List of Subjects 2.6 What is the List of Subjects and what am I required to do with it? Words of Issuance 2.7 What are "words of issuance"? Regulatory Text 2.8 What do I include in the regulatory text? 2.9 Headings 2.10 Table of contents 2.11 Authority citation 2.12 Numbering of rules 2.13 Amendatory language 2.14 Asterisks 2.15 Cross-references Signature Block 2.16 Who can sign my document? 2.17 Do I need a signature date? Style and Format Requirements 2.18 What should my rule document look like? 2.19 Example of a rule document Interim Rule and Direct Final Rule 2.20 Interim rule 2.21 Direct final rule Checklist for rule documents 2.22 Checklist for rule documents Chapter 2: How do I write a document for the rules category? Notes: In this chapter, "we," "our," or "OFR" refer to the Office of the Federal Register, National Archives and Records Administration, and "you" or "your" refer to Federal agencies that prepare documents for publication in the Federal Register. Use the examples in this chapter as models for style, not content. Although many of these are single-spaced for visual impact, you must double-space your document. 2.1 What types of documents go in the rules category? This category contains documents having general applicability and legal effect. The terms "rules" and "regulations" have the same meaning within the Federal Register publication system. Typical documents in this category are: Documents that amend the CFR by adding new text or by revising or removing existing text. Temporary rule documents that are effective immediately for a short or definable period of time. Interim rule documents that are effective immediately and may request comments. Direct final rule documents that request comments before the rule becomes effective. Documents that affect other documents previously published in the rules category. These documents: Correct a previously published rule. Change the effective date. Change the comment deadline of an interim rule or direct final rule. Suspend a previously published rule. Withdraw a rule not yet in effect. Petition for reconsideration. Documents that have no regulatory text and do not amend the CFR but affect your agency. These documents include: General policy statements. Interpretations of agency rules. Clarifications of agency rules. Waivers of agency rules that are generally applicable. 2.2 What are the requirements for a document in the rules category? A document published in the rules category should include the following items: Billing Code. Headings. Preamble. List of Subjects. Words of Issuance. Regulatory Text. Signature Block. Billing Code 2.3 What is a billing code and how do I get one? The Government Printing Office (GPO) assigns each agency that publishes in the Federal Register a billing code which GPO uses to bill your agency for printing costs. Your agency must identify an individual as your Printing Officer, the liaison between your agency and GPO for all billing matters. GPO gives your Printing Officer the billing code for your agency. Your billing code must appear on each document submitted for publication in the Federal Register. Obtain your billing code from your agency Printing Officer. Type the billing code at the top of the first page of the original(s) and the certified copies of each document. Type a "P" (WordPerfect), "F" (Coded), or "U" (Uncoded or ASCII) after your billing code when submitting a disk with your document. (See chapter 5.) Remember that your billing code may change each year. Headings 2.4 What information should go in the headings section at the beginning of my rule? Begin each rule document with headings that identify your agency and the subject matter of your document. The headings of a rule document also identify the CFR title and part your document amends. Present the headings for a rule document in this format. Department Name. Subagency Name. CFR Citation. Agency Docket Number (optional). Regulation Identifier Number (RIN). Subject Heading. or Agency Name. CFR Citation. Agency Docket Number (optional). Regulation Identifier Number (RIN). Subject Heading. The "Department" and "Subagency" headings for a document must reflect the department and subagency names as shown in the CFR chapter the document that amends. If your agency is not a cabinet-level department, do not use a subagency heading. If the CFR chapter is assigned to a subagency of a cabinet-level department, the department name must still appear in the document headings. (See example 1.) The "CFR Citation" heading contains the number of the CFR title and the number of each part the document amends. Even if the document affects only one paragraph within a part, include that part number. The "Agency Docket Number" heading is the internal file number your agency may assign. This heading is optional. The "RIN Number" is assigned by the Regulatory Information Service Center and identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions. The "Subject Heading" is a brief statement describing the document. You may use the CFR part heading if it describes the content of the document. However, use more specific information when the document amends several parts or when the part heading is too general. Example 1: Headings for a rule document from a cabinet-level department. DEPARTMENT OF COMMERCE Department Name National Oceanic and Atmospheric Subagency Name Administration 15 CFR Part 946 CFR Citation RIN 0648-AI90 RIN Number Coastal Energy Impact Program Subject Heading Example 2: Headings for a rule document from a non-cabinet agency. FEDERAL RESERVE SYSTEM Agency Name 12 CFR Part 220 CFR Citation [No. 85-959] Agency Docket Number (Optional) RIN 0648-FR22 RIN Number Credit by Brokers and Dealers Subject Heading If you issue a follow-up document, duplicate the headings of the earlier document, and add a distinguishing phrase to the subject heading. Example 3: Headings for a follow-up rule document. FEDERAL RESERVE SYSTEM Agency Name 12 CFR Part 220 CFR Citation [No. 85-959] Agency Docket Number (Optional) RIN 0648-FR22 RIN Number Credit by Brokers and Dealers; Subject Heading Confirmation of Effective Date If there are multiple agencies and CFR citations in the heading, see section 8.14. Preamble 2.5 What are the preamble requirements for a document in the rules category? Each agency document published in the rules category of the Federal Register must contain a preamble. The preamble follows the subject heading of the document. It explains the basis and purpose of the regulatory text, but contains no regulatory text. It arranges basic information on the "who, what, where, when, and why" of a document for the reader's convenience. The preamble captions are: AGENCY: ACTION: SUMMARY: DATES: ADDRESSES: FOR FURTHER INFORMATION CONTACT: SUPPLEMENTARY INFORMATION: These captions must appear in the order shown. An explanation and examples of what must appear within each caption follow. AGENCY caption. The AGENCY caption states the "who" of a document by identifying the agency issuing it. This caption usually repeats the name of the agency as carried in the document's headings. When the name of a subagency and cabinet-level department appear together, carry the subagency name first and then the department's commonly used acronym or shortened name. For organizational clarity, you may choose to include in this caption the name of an office which is not listed in the document's headings. Example 4. AGENCY: Office of the Secretary, USDA. AGENCY: National Archives and Records Administration. AGENCY: Consumer Product Safety Commission. AGENCY: Environmental Protection Agency. AGENCY: National Park Service, Interior. AGENCY: Bureau of Public Debt, Fiscal Service, Treasury. ACTION caption. The ACTION caption identifies the type of document. It does not summarize the substance of a document. Example 5 shows typical ACTION captions for a rule document. Others are possible. Example 5. ACTION: Final rule. ACTION: Final rule; delay of effective date. ACTION: Final rule; suspension of effectiveness. ACTION: Final rule; confirmation of effective date. ACTION: Final rule; correction. ACTION: Final rule; interpretation. ACTION: Final rule; petition for reconsideration. ACTION: Interim rule. ACTION: Interim rule with request for comments. ACTION: Direct final rule. ACTION: Temporary rule. ACTION: Policy statement. ACTION: Interpretation. ACTION: Clarification. SUMMARY caption. Under the SUMMARY caption you explain the "what," "why," and "effect" of the document. In the SUMMARY, you must answer these three questions: What action is being taken? Why is this action necessary? What is the intended effect of this action? Use the following guidelines in preparing a SUMMARY. Use language a non-expert will understand. Describe what the document does, not how it affects the CFR. Refer to an act of Congress by the popular name of the act. Do not use legal citations. State what your document does; do not include regulatory history or extensive background. Do not include qualifications, exceptions, or specific details. Be brief. You may not use the SUMMARY to prove a point or argue a case. Supporting information, details, discussion of the regulatory history, and precise legal citations are essential in an adequate preamble but do not belong in the SUMMARY. Extended discussion of the rule belongs in the SUPPLEMENTARY INFORMATION section. Example 6. SUMMARY: The Coast Guard amends the uninspected vessel rules by requiring emergency position indicating radio beacons (EPIRBs). The Emergency Position Indicating Radio Beacons on Uninspected Vessels Requirements Act amends the shipping laws of the United States by requiring uninspected commercial vessels to have the number and type of EPIRBs prescribed by rule. These rules ensure rapid and effective search and rescue during emergency situations. SUMMARY: This document amends the Customs rules by adding Pakistan to the list of nations whose vessels may transport empty cargo vans, empty lift vans, and empty shipping tanks between points embraced within the coastwise laws of the United States. The Department of State supplied Customs with evidence that Pakistan places no restrictions on the carriage of empty cargo vans, empty lift vans, and empty shipping tanks by vessels of the United States between ports in Pakistan. This amendment recognizes the United States granting reciprocal privileges for vessels registered in Pakistan. DATES caption. The DATES caption presents the "when" of a document. Include the dates that are essential to the document. Include the following dates, if appropriate: Effective dates. Comment deadlines for an interim rule or direct final rule. Extension of comment deadlines on an interim rule or direct final rule. Expiration dates. Compliance dates. Confirmation of effective date. Other dates the public may need to know. Place no more than four dates under the caption "DATES." Example 7: Format in rule with four dates. DATES: Effective Date: July 10, 199x. Compliance Workshops: 1. March 26, 199x, 9:30 a.m. to 5 p.m., Philadelphia, PA. 2. April 3, 199x, 9:30 a.m. to 5 p.m., Chicago, IL. 3. April 8, 199x, 9:30 a.m. to 5 p.m., Atlanta, GA. If you have more than four dates, place them in the SUPPLEMENTARY INFORMATION section of the preamble under a heading such as "Compliance Workshops." This requirement generally does not apply to effective dates. Example 8. DATES: See Supplementary Information section for Compliance Workshop dates. Do not include information other than dates in the DATES caption. Place any discussion of meeting agenda, content of material available for inspection, etc. in the SUPPLEMENTARY INFORMATION section. Remember that DATES and ADDRESSES are separate captions. All date information must appear in the DATES caption. Effective dates. Provide an effective date for each rule document. (See example 9.) You must provide an effective date for each regulatory change if the date is not the same. (See example 10.) The effective date is the date that amendments in the rule document affect the current CFR. The current CFR consists of the rules published in the latest CFR volume and any effective amendments published in the Federal Register since the revision date of the latest CFR volume. Example 9. DATES: Effective [INSERT DATE OF PUBLICATION IN THE FEDERAL REGISTER]. Example 10. DATES: This rule is effective November 22, 199x, except for 22.5(a) which is effective December 23, 199x. OFR computes and inserts dates tied to Federal Register publication or OFR filing using the "Table of Effective Dates and Time Periods." This table appears in the Reader Aids section of the first Federal Register issue each month. In computing the date, we count the day after publication as the first day. When a date falls on a weekend or a Federal holiday, we use the next Federal business day. If we are to compute and insert a date, present the date as shown in example 11. We compute dates based only on OFR filing or publication in the Federal Register. Example 11. DATES: This rule is effective [INSERT DATE 60 DAYS AFTER DATE OF PUBLICATION IN THE FEDERAL REGISTER]. If a specific effective date is dependent upon Congressional action or a dispositive Federal Court decision, your agency must promptly publish a Federal Register document announcing the establishment of or change to the effective date. (See example 12.) Example 12. DATES: This rule takes effect either March 4, 199x, or later if Congress takes certain adjournments. If you want to know the effectivedate of this rule, call or write the [INSERT AGENCY] contact person. The [INSERT AGENCY] will publish a document effective announcing the date in the Federal Register. DATES: This rule has been classified as a major rule subject to congressional review. The effective date is [INSERT DATE 90 DAYS AFTER DATE OF PUBLICATION IN THE FEDERAL REGISTER]. However, at the conclusion of the congressional review, if the effective date has been changed, the [INSERT AGENCY] will publish a document in the Federal Register to establish the actual effective date or to terminate the rule. Compliance dates and applicability dates. Some rules include both an effective date and a compliance or applicability date. Your effective date is the date that your amendments affect the current CFR. Your compliance or applicability date is the date that the affected person must start following the rule. Place the compliance or applicability date after the effective date. (See example 13.) Example 13: DATES sections that include applicability or compliance dates. DATES: This regulation is effective [INSERT DATE 90 DAYS AFTER DATE OF PUBLICATION IN THE FEDERAL REGISTER]. However, compliance for juice other than apple juice or apple cider is not required until [INSERT DATE 120 DAYS AFTER DATE OF PUBLICATION IN THE FEDERAL REGISTER]. DATES: Effective Date: This rule is effective on July 30, 199x. Applicability Date: Subpart A of part 124 applies to all applications for 8(a) business development program pending as of July 30, 199x. DATES: EFFECTIVE Date: This rule is effective [INSERT DATE 30 DAYS AFTER DATE OF PUBLICATION IN THE FEDERAL REGISTER]. Compliance Date: Any labels that require revision as a result of these revocations shall comply no later than January 1, 199x. DATES: Effective Date: [INSERT 60 DAYS AFTER DATE OF PUBLICATION IN THE FEDERAL REGISTER]. Comment Date: Comments due on or before [INSERT DATE 30 DAYS AFTER DATE OF PUBLICATION IN THE FEDERAL REGISTER]. Compliance Date: Mandatory compliance [INSERT DATE 120 DAYS AFTER DATE OF PUBLICATION IN THE FEDERAL REGISTER]. This table summarizes the differences between effective dates and compliance or applicability dates. An Effective Date: Addresses the CFR placement. Is the date the rule affects the current CFR. Is required by OFR. Must appear in DATES; may appear in CFR text. A Compliance or Applicability Date: Addresses the person who must comply. Is the date the person must comply. Is not required by OFR. May appear in DATES and CFR text. Information collection requirements. If a rule contains information collection requirements which are not yet effective, use the wording in example 14. Example 14. DATES: Effective June 1, 199x, except for 232.48(g) which contains information collection requirements that have not been approved by OMB. The Environmental Protection Agency will publish a document in the Federal Register announcing the effective date. Delays and Stays. In this discussion of Delays and Stays, the term "Delay" is interchangeable with "Postpone," as is "Compliance Date" with "Applicability Date." Delay of effective dates. You may Delay only effective dates that have not yet taken place. If you did not include the effective date as part of the CFR text, you need only announce the Delay in the DATES section: Example 15. DATES: The effective date of the rule amending 47 CFR Part 600 published at 64 FR 12345, May 15, 1999 is delayed until May 15, 2000. If the Delay is indefinite, you must state that you will furnish the date in a future Federal Register. Example 16. DATES: The effective date of 201.64, added at 6x FR 12345, July 23, 199x, is delayed indefinitely. The Administration will publish a document in the Federal Register announcing the new effective date. If you also stated the effective date as part of CFR text, you must also amend the CFR text: Example 17. Section 600.1 is amended in paragraph (c) by removing the date "July 1, 199x" and adding in its place "September 1, 199x." Stay of CFR text. You may Delay only effective dates that have not yet taken place. If the effective date has already taken place, you must Stay the CFR unit instead. Example 18. Effective [INSERT DATE OF PUBLICATION IN THE FEDERAL REGISTER], 21 CFR 101.65(d)(2)(ii)(C) and (d)(4)(ii)(B) are stayed until January 1, 199x. If, when Staying an amendment or revision to CFR text, you wish to restore the previous text, you must add the previous text back to the CFR, using a CFR paragraph or section number different from the Stayed text. Stay or Delay of compliance dates. If you decide to Delay a compliance date: If you originally stated the compliance date in the DATES section but not in the CFR text, you may state that the date is Delayed or Postponed: Example 19. DATES: The compliance date for the rule amending 21 CFR Part 600 published at 64 FR 12345 on May 15, 1999 is delayed until May 15, 2000. If the date is indefinite, you must state that you will furnish the date in a future Federal Register. If the compliance date is in the CFR text and the effective date of the CFR change has passed, you may Stay (not Delay) the CFR text unit. If you decide to change a compliance date that is in the CFR text, you must amend the CFR in a formal amendment. Example 20. Section 20.5 is amended in paragraph (e) by removing the date "March 1, 199x" and adding in its place "March 15, 199x." Use the following table to help decide whether to Stay or Delay effective dates or compliance dates. Delay Use Delay when an effective date or compliance date has not yet passed: Effective Date. State the Delay in the DATES section. If you have also stated the effective date in CFR text, amend the CFR. Compliance Date. State the Delay in the DATES section. If you have also stated the compliance date in CFR text, amend the CFR. Stay Use Stay when an effective date or compliance date has passed: Effective Date. You must Stay the CFR unit or amend the CFR. You may not Stay an effective date after that date has passed. Compliance Date: You may Stay a compliance date, even after it has passed (a compliance date affects the user, not the CFR). State the Stay of compliance in the DATES section. ADDRESSES caption. The ADDRESSES caption contains the "where" of the document. Include any address that the public needs to know. You may include addresses for: Mailing public comments on an interim rule or direct final rule. Hand-delivering public comments on an interim rule or direct final rule. Attending a public hearing (or meeting). Examining any material available for public inspection. Do not include information other than addresses in the ADDRESSES caption. Place any discussion of how to submit comments, how to register for a meeting, meeting agenda, content of material available for inspection, etc. in the SUPPLEMENTARY INFORMATION section. If you are accepting electronic comments, place electronic addresses in the ADDRESSES section, and detailed requirements in the SUPPLEMENTARY INFORMATION section. (See examples 25 and 26.) This caption is optional for a rule document unless you are requesting comments on an interim rule, post-publication review of the effectiveness of an interim rule, or a direct final rule. Place no more than four addresses under the caption "ADDRESSES." Example 21: Format in rule with four addresses. ADDRESSES: The compliance workshop locations are: 1. Philadelphia -- Ramada Inn (Meadows Ballroom, Section A & B), 76 Industrial Highway, Essington, PA 19029. 2. Chicago -- O'Hare Ramada Inn (Penthouse Ballroom, 9th Floor), 6600 Mannheim Road, Des Plaines, IL 60018. 3. Atlanta -- Ramada Inn Central (Georgian Ballroom), I-85 at Monroe Drive, Atlanta, GA 30324. 4. Denver -- Main Post Office Building (2nd Floor Auditorium, Room 269), 1823 Stout Street, Denver, CO 80202. If you have more than four addresses, place them in the SUPPLEMENTARY INFORMATION section of the preamble under a heading such as "Compliance Workshops." Example 22. ADDRESSES: See Supplementary Information section for Compliance Workshop addresses. Remember that ADDRESSES and DATES are separate captions. All address information must appear in the ADDRESSES caption. Example 23. ADDRESSES: Address all comments concerning this interim rule to Nell C. Commentary, Commissioner, Rehabilitation Services Administration, Mary E. Switzer Building, Room 3325, 330 C Street SW., Washington, DC 20202-2735. Send a copy of any comments that concern information collection requirements to the Office of Information and Regulatory Affairs, OMB, Room 3002, New Executive Office Building, Washington, DC 20503; Attention: Daniel J. Information. Example 24. ADDRESSES: Mail comments and requests to testify to Hearing Clerk, Room 000, Department of XXXXX, Washington, DC 20000; the hearing will be held in Room 000, 000 Independence Avenue, SW., Washington, DC. Place detailed information about electronic access and filing in the SUPPLEMENTARY INFORMATION section of the preamble under a heading such as "Electronic Access and Filing Addresses." Example 25. ADDRESSES: Submit electronic comments and other data to oppdocket@epamail.epa.gov. See SUPPLEMENTARY INFORMATION for file formats and other information about electronic filing. Example 26. SUPPLEMENTARY INFORMATION: * * * * * [Asterisks Indicate Text Not Reprinted.] Electronic Access and Filing You may submit comments and data by sending electronic mail (E-mail) to: oppdocket@epamail.epa.gov. Submit comments as an ASCII file avoiding the use of special characters and any form of encryption. The OPP also accepts comments and data on disks in WordPerfect 5.1 file format or ASCII file format. Identify all comments and data in electronic form by the docket number [PP 4F4327/R2253]. You may file electronic comments on this proposed rule online at many Federal Depository Libraries. File an electronic copy of objections and hearing requests with the Hearing Clerk at: oppdocket@epamail.epa.gov. FOR FURTHER INFORMATION CONTACT caption. Under the FOR FURTHER INFORMATION CONTACT caption, you must include the name and telephone number of a person within your agency who can answer questions about the document. You may list two or more persons to contact concerning different aspects of a document. Example 27. FOR FURTHER INFORMATION CONTACT: John Regwriter, 202-000-0000. or FOR FURTHER INFORMATION CONTACT: Technical information: John Regwriter, 202-000-0000. Legal information: Mary Regulatory, 202-000-0001. SUPPLEMENTARY INFORMATION caption. In this section, include the regulatory history of this rulemaking, and a statement of the rule's basis and purpose. Present this information in language that the reader can easily understand, with descriptive headings to highlight and organize topics. If a reference to the Federal Register or Code of Federal Regulations is necessary, use the format shown in examples 78 and 79. You may use the SUPPLEMENTARY INFORMATION section to provide additional information that is required by law, agency policy, or Executive order. Answering some of these questions may help you draft your SUPPLEMENTARY INFORMATION. Some of the questions only apply to an interim rule requesting comments or to a rule for which your agency is doing a post-publication review of the rule's effectiveness. What law or directive authorizes the rule? What existing regulations address the problem? What problem does the rule address? What issues are connected with the problem? What facts, surveys, or studies identify and define the problem? How does this rule attempt to solve the problem? Were other solutions considered? Why was this solution chosen? Is this solution cost-effective? How will this solution affect the regulated parties? Does this rule contain penalties for noncompliance? Are penalty provisions essential? Can the requirements be monitored? Can the penalty provisions be enforced? Have you identified other documents in this rulemaking, and included their Federal Register citations? (See example 78.) Did you publish an Advance Notice of Proposed Rulemaking? Did you publish a proposed rule? Have you announced meetings or hearings? Have you discussed all necessary regulatory analysis and review requirements? What other statutes apply to this rulemaking? How will public participation be handled? How was public participation handled? Are there special instructions for mailing public comments? Are there formal or informal hearings? Are there procedures for requesting a public hearing? Are there any instructions for filing comments or making oral presentations? Will transcripts of the hearing be made available? Have you used subject headings to break up a lengthy SUPPLEMENTARY INFORMATION section? For example: Background. Statutory authority. Discussion of comments. Related documents. Topical headings. Drafting information. Public participation. List of Subjects 2.6 What is the List of Subjects and what am I required to do with it? Each rule document must contain a list of index terms (List of Subjects) for each CFR part number cited in the document's heading. These terms are contained in the "Federal Register Thesaurus of Indexing Terms," available at http://www.archives.gov/federal_register//, under "Document Drafting Resources." The terms provide a common vocabulary for indexing the rulemaking documents of all agencies and are the basis of the "CFR Index" prepared by the OFR. We will provide you with a list of appropriate terms for its existing CFR parts. For new CFR parts, you should select appropriate terms from the Thesaurus. You may include additional terms not contained in the Thesaurus for either existing or new CFR parts as long as you also include appropriate Thesaurus terms. When you select a term that is not in the Thesaurus, ask yourself, "Would I search for the subject matter using this term?" The List of Subjects is the last item in the SUPPLEMENTARY INFORMATION section of the preamble. Put the List of Subjects terms in alphabetical order and separate them with commas. Capitalize only the first word of each term. End the terms with a period. (See example 28.) You do not need a list of subjects for a document that: Has no regulatory text. Only presents nomenclature changes. Corrects a previous document. You must include all the established Thesaurus terms for a part that you are removing from the CFR. A List of Subjects is set out separately for each CFR part affected. (See example 29.) However, if the terms used are identical for several CFR parts, you may consolidate. (See example 29.) Example 28: Format for document citing a single CFR part. List of Subjects in 40 CFR Part 262 Hazardous waste, Imports, Labeling, Packaging and containers, Reporting and recordkeeping requirements. Example 29: Format for document citing two or more CFR parts. List of Subjects 15 CFR Part 370 Administrative practice and procedure, Exports. 15 CFR Parts 372 and 386 Exports, Reporting and recordkeeping requirements. Words of Issuance 2.7 What are "words of issuance"? The words of issuance provide: The tie between this rule and the CFR units that it affects. The bridge between the preamble of this document and the regulatory changes. Words of issuance are always in the present tense. Example 30. For the reasons stated in the preamble, the Federal Energy Regulatory Commission amends 18 CFR chapter I as set forth below: For the reasons discussed in the preamble, the Nuclear Regulatory Commission amends 10 CFR part 430 as follows: Regulatory Text 2.8 What do I include in the regulatory text? Regulatory text is the section of your document that sets out your agency's changes to the CFR. It can include: Headings. Table of Contents. Authority citation. Numbering of rules. Amendatory language. Asterisks. Cross-references. 2.9 Headings. Provide a heading for each part, subpart, section, and appendix that you amend. You may use a heading for a paragraph. A heading is a brief statement that accurately describes the content of the CFR unit. A change in the heading requires an amendment to the CFR. Example 31: Headings in regulatory text. PART 970--DEEP SEABED MINING Part REGULATIONS FOR EXPLORATION LICENSES Subpart A--What Applications Must I Subpart Heading complete to Obtain My Exploration (Optional) Licenses? 970.103 Which deep seabed mining Section activities are prohibited and which ones are restricted? Part. Each part heading should contain subject terms that identify the agency's rules in a manner consistent with the terms used by other agencies to identify similar material. The OFR has developed a thesaurus of subject terms that we use to index the CFR and related publications. Use the Thesaurus to obtain subject terms that identify the content of the rule document, and use the appropriate subject terms in the part heading. Subpart. You may use subpart headings to separate ideas within a part. Subparts are not required. Undesignated center heading. You may use undesignated center headings to break up a large subpart and group together sections concerning a particular subject area. Undesignated center headings are not required. Appendix. An appendix may appear at the section, subpart, or part level. Designate each appendix with a capital letter, identify whether it belongs to a section, subpart, or part, and give it a descriptive heading. Do not carry the heading for an appendix to a section in the table of contents. If your agency has established a uniform designation system for its appendices, follow the established system. (See chapter 7.) Example 32: Appendix headings. Appendix B to Subpart A of Part 915 -- Illustrations of Infant Highchair Designs Appendix A to 315.2 --Model Air Pollution Control Plan Appendix A to Part 2 -- Flammability Statistics for Floor-Cleaning Fluids Section. Descriptive section headings are signposts for the reader. They help readers identify the particular regulatory text that applies to them. End each section heading with a period or question mark. Paragraph. You may use headings at the paragraph level. Be consistent. If you use a heading for one paragraph, be sure to use a heading for all paragraphs at that level. End paragraph headings with a period and underline them in the document. In the Federal Register, the underlined headings are printed in italics. 2.10 Table of contents. You need a table of contents for a document that: Adds a new part or subpart. Revises an existing part or subpart. Include the following in your table of contents: Section headings. Subpart headings. Undesignated center headings. Appendix headings to parts and subparts. Table of contents entries are identical to the section headings, subpart headings, undesignated center headings, and appendix headings in the regulatory text. Do not list paragraph headings or appendix-to- section headings in the table of contents. Do not provide a table of contents in a document that adds or amends a single section or miscellaneous sections. We change the table of contents when these amendments are included in the CFR. 2.11 Authority citation. You must cite the authority that authorizes your agency to change the CFR. Give the authority citation in the shortest form. Placement of the authority citation depends on what unit of the CFR you are amending. There are two types of authority: Statutory: Public law. United States Code. Nonstatutory: Presidential Executive order. Presidential Administrative order. Presidential Memorandum. Agency delegation, policy, or directive. Office of Management and Budget circular. CFR regulations. Your agency is responsible for maintaining accurate and current authority citations. Present the authority citation at one of two central places: Part level, or Subpart level. You may give citations of authority for particular subparts and sections within the central authority citation. (See examples 33 and 34.) Example 33. Authority: 42 U.S.C. 2201; 45 U.S.C. 5841. Subpart A also issued under 5 U.S.C. 552; 31 U.S.C. 9701. Subpart B also issued under 5 U.S.C. 552a. Subpart C also issued under 5 U.S.C. 552b. Example 34. Authority: 42 U.S.C. 2111, 2112, 2201, 2232, 2233, 2236, 2282, 5841, 5842, 5846. Section 30.7 also issued under 42 U.S.C. 5851. Section 30.34(b) also issued under 42 U.S.C. 2234. Section 30.61 also issued under 42 U.S.C. 2237. Statutory authority. Each citation of statutory authority must use the United States Code citation, if one exists. To determine the United States Code citation, use one of the following: The current edition of the United States Code or its supplement. The slip law, for recently signed public laws. Example 35. Authority: 44 U.S.C. 2101-2118; 50 U.S.C. 6909. We generally recommend that you use only the United States Code citation. (See example 35.). When a United States Code citation does not exist (for example, for appropriations laws), you must cite the section of the public law, if appropriate, the public law, and the U.S. Statutes at Large. Do not cite the popular name of a public law. (See example 36.) Example 36. Authority: Sec. 8067, Pub. L. 98-473, 98 Stat. 1937. If you choose to cite the public law and the U.S. Statutes at Large in addition to the United States Code, present them in the order shown in example 37. Example 37. Authority: Sec. 8, Pub. L. 98-328, 82 Stat. 470 (34 U.S.C. 21). If you cite two different laws where one has a United States Code citation and the other does not, place the United States Code citation first. (See example 38.) Example 38. Authority: 42 U.S.C. 2996; Pub. L. 104-208, 110 Stat. 3009; Pub. L. 104-134, 110 Stat. 1321. Nonstatutory authority. Cite nonstatutory authority by document designation, Federal Register citation, and CFR citation. (See example 39.) Example 39. Authority: E.O. 12731, 55 FR 42547, 3 CFR, 1990 Comp., p. 306; 5 CFR 2635.105. If you include both statutory and nonstatutory citations in the same authority citation, place the statutory citation first. (See example 40.) Example 40. Authority: 8 U.S.C. 1161(f); 29 U.S.C. 1801-1872; Secretary's Order 6-84, 49 FR 32473. If you need to deviate from the standard authority citation format, submit a letter requesting the deviation and explaining the need to the Director of the Federal Register. Placement of the authority citation. Whole CFR part. If a document adds or revises an entire CFR part, place the authority citation directly after the table of contents and before the regulatory text. (See example 41.) Example 41. PART 54--ALLOTMENTS FOR CHILD AND SPOUSAL SUPPORT Sec. 54.1 Purpose. 54.2 Applicability and scope. 54.3 Definitions. 54.4 Policy. 54.5 Responsibilities. 54.6 Procedures. Authority: 15 U.S.C. 1673; 37 U.S.C. 101; 42 U.S.C. 665. CFR section. If a document amends only certain sections within a CFR part, set out the authority citation for the part as the first numbered item in the list of amendments for the part. (See examples 42 and 43.) Example 42. PART 4--SERVICES TO THE PUBLIC 1. The authority citation for part 4 is revised to read as follows: Authority: 44 U.S.C. 1508. Example 43. PART 4--SERVICES TO THE PUBLIC 1. The authority citation for part 4 continues to read as follows: Authority: 44 U.S.C. 1502. Subparts. If a document adds or revises an entire subpart, using the same authority citation as the CFR part, set out the authority citation for the part as the first numbered item in the list of amendments for the part. (See examples 42 and 43.) If a document adds or revises an entire subpart using a different authority citation, set out the authority citation for the subpart directly after the heading to the subpart and before the regulatory text of the subpart. (See example 44.) Example 44. Subpart B--Supportive Services for Table of Contents Minority, Disadvantaged, and Women Business Enterprises Sec. 230.201 Purpose. 230.202 Definitions. 230.203 Policy. Subpart B--Supportive Services for Subpart Heading Minority, Disadvantaged, and Women Business Enterprises Authority: 23 U.S.C. 101, 140(c), Subpart B Authority 304, 315; 49 CFR 1.48(b). Citation 230.201 Purpose. Text of Section This subpart prescribes the policies, procedures, and guidance to develop, conduct, and administer supportive services assistance programs for minority, disadvantaged, and women business enterprises. * * * * * [Asterisks Indicate Text Not Reprinted.] Parts removed. If you remove a part in a rule document, you must give your agency's authority for the action. Place the authority in the "words of issuance." (See examples 45 and 46.) Example 45. Accordingly, under the authority 10 U.S.C. 8013, amend XX CFR chapter VII by removing part 837. Example 46. Under 42 U.S.C. 541 and as discussed in the preamble, amend XX CFR chapter II as follows: 2.12 Numbering of rules. The regulatory text of your document must conform with the structure of the CFR. Code of Federal Regulations structure. The basic structure of the CFR consists of a hierarchy of designated CFR units. The CFR numbering system is not based on a decimal numbering system. The following table illustrates the CFR structure. CFR Unit CFR Designation Description Title 12 Broad area subject to Federal regulation Chapter III Rules of a single issuing agency Part 303 Unified body of rules concerning a single function or specific subject Section 303.1 Short presentation of one regulatory function. The section is the basic unit of the CFR. The content of a section is a short, simple presentation of a single regulatory function. Each section number includes the number of the part followed by a period and a sequential number. Example 47: Section number. 25.1. Hyphenated numbers (117-2.1 or 117-3.15) or numbers with alpha characters (part 115a, 115a.1, or 115.1a) are not permitted in designating units within the CFR system. The Director of the OFR must approve any deviation from standard CFR structure. Submit a request for approval in writing before you begin drafting. Paragraph structure of a section. If you have more than one paragraph, designate each one as shown in example 48. Indent each designated paragraph within a section. The paragraph structure within a section allows six levels of designation. We strongly recommend that you do not use more than 3 paragraph levels. Use of more than 3 paragraph levels makes your rule hard to read and use. Use more sections as a drafting technique to avoid using excessive paragraph levels. Use the paragraph structure chart in example 48. Sections consisting of a single paragraph or the introductory text of a section do not require a designation. However, we no longer permit an undesignated concluding paragraph. Indicate italics by underlining in a typewritten document. Example 48: Paragraph structure of a section. level 1 (a), (b), (c), etc. level 2 (1), (2), (3), etc. level 3 (i), (ii), (iii), etc. level 4 (A), (B), (C), etc. level 5 (1), (2), (3), etc. level 6 (i), (ii), (iii), etc. Definitions. For a discussion of definitions, see section 8.15. Notes. Label notes in CFR text to show whether they apply to the whole section or to the preceding paragraph. (See example 49.) Example 49. Note to 30.1. Note to paragraph (f). Note to paragraph (b)(2). 2.13 Amendatory language. A rule document often makes changes or additions to the CFR. The regulatory text of a document must fit into the current text of the CFR. You should precisely identify and describe the changes made to the CFR. While the words of issuance describe the general effect of the document, the amendatory language uses standard terms to give specific instructions on how to change the CFR. Do not include in the amendatory language a discussion of why the changes are made. This belongs in the SUPPLEMENTARY INFORMATION section. Your agency's current CFR text is not necessarily what appears in the latest edition of the CFR, since your agency publishes changes to the CFR in the daily Federal Register. The "List of CFR Sections Affected" (LSA) is a cumulative monthly numerical index to rules and proposed rules. Use it to determine if any changes have been made since the revision date of your CFR. The "CFR Parts Affected" is a cumulative daily numerical index to rules and proposed rules published in the Reader Aids section of the Federal Register. Use it to check for changes in any month not covered by the LSA. Before you begin drafting amendatory language, consult the latest version of the CFR and the LSA, and the latest Federal Register for any month not covered by your LSA. This gives you the current and official version of the CFR regulations you are changing. Base amendatory language on the current text of a rule. You must: Identify the specific CFR unit being changed. Place amendments in CFR numbering order. Use one of the standard terms to describe the change. Address all regulatory text set out in your document. For extensive changes, revise the text in full rather than prepare fragmentary amendments. The reader will then have the complete text of the amended unit. Use of "Amend." "Amend" means that an existing CFR unit is changed. Because it is an introductory term, it cannot stand alone. Use it with one of the specific amendatory terms to precisely describe the change to the CFR unit. Example 50: Amend. Amend 791.27 to revise paragraph (b)(3) and to add paragraph (d)(4) to read as follows: Specific amendatory terms. Use the following terms in amendatory language. Each term is a precise instruction to change a CFR unit. Add. Correct. Nomenclature change. Redesignate. Remove. Republish. Reserve. Revise. Stay or Suspend. Withdraw. Add. "Add" means that a new CFR unit is inserted in the CFR. Example 51: Add. Add part 1812 to read as follows: Add 5.26 under the undesignated center heading "How To Apply For a Permit" to read as follows: Add 20.89 to subpart H to read as follows: In 18.13, add paragraph (e) to read as follows: Add new paragraph (f)(5) to 210.14 to read as follows: Add 4.8(a)(3)(iii) to read as follows: Correct. The term "correct" fixes a clerical or typographical error in a recently published document. Corrections to the regulatory text must identify the CFR unit being corrected. (See chapter 4.) Example 52: Correct. Nonregulatory text: On page 00000, in the second column, on line 5, correct the reference "39.10(a)(1)" to read "44.10". Regulatory text: 20.15 [Corrected] On page 00000, in the third column, in 20.15(c)(1), correct "Director" to read "Acting Director". Delay. Do not use "Delay" in amendatory language. Use it in the preamble under the DATES caption to Delay an effective date that has not yet taken place. See section 2.5, and see also "Stay or Suspend" in this section. Nomenclature change. A nomenclature change directs a change to a term or phrase throughout a CFR unit. It is commonly used to change an office designation or the title of an agency official. Example 53: Nomenclature Change. 720.7 [Amended] In 12 CFR 720.7(c)(2) remove the words "Deputy Administrator" and add, in their place, the words "Vice-Chairman of the National Credit Union Administration Board". 720.7, 720.20, 720.22, 720.24, 720.26, and 720.27 [Amended] In addition to the amendments set forth above, in 12 CFR part 720 remove the words "Assistant Administrator for Administration" and add, in their place, the words "Director of the Office of Administration" in the following places: a. Section 720.7(a)(1), (c)(2), and (c)(3); b. Section 720.20(b) introductory text; c. Section 720.22(a); d. Section 720.24(a) and (b)(3); e. Section 720.26(a); and f. Section 720.27(a) and (c). PART 315--[AMENDED] In part 315, revise all references to "Domestic Commerce" to read "Domestic Business Development". 780.40, 780.41, and 780.42 [Amended] In the table below, for each section indicated in the left column, remove the title indicated in the middle column from wherever it appears in the section, and add the title indicated in the right column: Section Remove Add 780.40 Assistant Secretary Assistant Secretary for Housing for Housing Production and Mortgage Credit 780.41 Assistant Secretary Assistant Secretary for Housing for Housing -- Production and Federal Housing Mortgage Credit Commissioner (HPMC) -- Federal Housing Commissioner 780.42 Deputy Assistant Deputy Assistant Secretary for Secretary for Housing -- Housing Production and Deputy Federal Mortgage Credit -- Housing Commissioner Deputy Federal Housing Commissioner Redesignate. "Redesignate" transfers a CFR unit to a vacant position and assigns a new designation. A redesignation table may also be used. Example 54: Redesignate. PART 80 [REDESIGNATED AS PART 90 AND AMENDED] 2. Redesignate part 80 as part 90 and amend the references as indicated in the table below: 3. In 100.5, redesignate paragraphs (a) through (c) as paragraphs (d) through (f) and add new paragraphs (a) through (c) to read as follows: 4. Redesignate part 20 as part 30 and revise it to read as follows: 226.3 through 226.5 [Removed] 226.6 through 226.8 [Redesignated as 226.3 through 226.5] 5. Remove 226.3 through 226.5 and redesignate 226.6 through 226.8 as 226.3 through 226.5, respectively. 45.3 [Amended] 6. In 45.3, redesignate paragraphs (a) through (c) as paragraphs (a)(1) through (a)(3). In redesignated paragraph (a)(1), further redesignate paragraphs (1) and (2) as paragraphs (a)(1)(i) and (ii). Remove. "Remove" means that an existing CFR unit is being taken out of the CFR. Example 55: Remove. 300.12 [Removed] Remove 300.12. 495.73 [Amended] In 495.73, remove paragraphs (a)(5) and (e). Republish. "Republish" means that an unchanged CFR unit is set out for the convenience of the reader, often to provide the context for an amendment. Therefore, you must present the republished text accurately. Example 56: Republish. In 2.1, the introductory text of paragraph (a) is republished and paragraphs (a)(1) and (a)(3) are revised to read as follows: Reserve. "Reserve" is a term used to fill in gaps in CFR numbering. Removing a subpart or a paragraph may leave a gap which could confuse the reader. To avoid confusion in your amendatory language, you should remove and reserve the subpart or paragraph. (See example 57.) You may also use "reserve" when adding or revising a CFR unit to indicate where future text will be added. (See example 58.) Example 57: Reserve (when removing a CFR unit). Subpart Q--[Removed and Reserved] Remove and reserve subpart Q, consisting of 103.10 through 103.25. Example 58: Reserve (when adding or revising a CFR unit). Add and reserve subpart E and add subpart F, consisting of 25.100 through 25.130, to read as follows: Revise. "Revise" means that an existing CFR unit is replaced in its entirety. It is important that you specifically identify the CFR unit being revised. Example 59: Revise. Revise part 105 to read as follows: Revise 80.100(e)(1)(iii) to read as follows: In 15.4, revise paragraph (b) and the introductory text of paragraph (f)(2) to read as follows: Stay or Suspend. "Stay" or "Suspend"stops a CFR unit temporarily or indefinitely. The amendatory language must cite the CFR unit affected. The content of the CFR unit is not changed. During the suspension, the CFR unit is not in effect or enforceable. Consult with us when using the term "Stay." For a discussion of Stays versus Delays, see the DATES caption in section 2.5. Withdraw. "Withdraw" indicates that a previously published rule which is not in effect is removed from the Federal Register publication system and will not become effective or enforceable. Addition or revision of a part or subpart. Parts. If you add or revise a part, use these elements in the order shown. (See example 60.) Amendatory language. Part heading. Table of contents. Authority citation. Regulatory text. Subparts. If a part has a single authority citation at the end of the table of contents and you want to add or revise a subpart in that part, use these elements in the order shown: Part heading. Authority citation for the part. Amendatory language. Subpart heading. Table of contents. Regulatory text. or If each subpart in a part has its own authority citation and you want to add or revise a subpart in that part, use these elements in the order shown: Part heading. Amendatory language. Subpart heading and table of contents. Subpart heading. Authority citation for the subpart. Regulatory text. Example 60: Revision of a part. Revise part 3 to read as follows: Amendatory Language PART 3--SERVICES TO THE PUBLIC Part Heading Sec. Table of Contents 3.1 Information services. 3.2 Public inspection of documents. 3.3 Reproduction and certification of copies of acts and documents. Authority: 44 U.S.C. 1506; sec. 6, Authority Citation E.O. 10530 , 19 FR 2709, 3 CFR, 1954-1958 Comp., p.189. 3.1 Information services. Regulatory Text (a) The Office of the Federal Register (OFR) provides information on: (1) Publications in 2.5 of this chapter; and (2) Original acts and documents filed with the OFR. (b) The OFR cannot provide excessive information or do extensive research. (c) The staff may not summarize or interpret substantive text of any act or document. 3.2 Public inspection of documents. (a) During the OFR's office hours, documents filed with the OFR pursuant to law are available for public inspection at 800 North Capitol Street, NW., Suite 700, Washington, DC. There are no formal inspection procedures or requirements. (b) By direction of the Director of the Office of the Federal Register, the OFR staff must file for public inspection documents received and processed not later than the working day preceding the publication day for that document. (c) By direction of the Director of the Office of the Federal Register, the OFR staff must place on the original and certified copies of each document a notation of the day and hour when it was filed and made available for public inspection. (d) Customers may view, photocopy, or make excerpts of documents on public inspection. 3.3 Reproduction and certification of copies of acts and documents. The regulations for the public use of records in the National Archives and Records Administration (36 CFR parts 1252 through 1258) also govern the furnishing of reproductions of acts and documents and certificates of authentication for them. Section 1258.14 of those regulations provides for the advance payment of appropriate fees for reproduction services and for certifying reproductions. Amendment to a section. If you amend a section, use these elements in the order shown: Part heading. Authority citation. Amendatory language. Section heading. Regulatory text. If you add or revise a section, use the format shown in example 61. If you add a section to a part which contains subparts or undesignated center headings, identify the subpart or undesignated center heading which will contain the new section. Example 61: Revision of a section. PART 133--TOLLS FOR USE OF CANAL Part Heading 1. The authority citation for part Authority Citation 133 is revised to read as follows: Authority: 22 U.S.C. 3791; E.O. 12215,45 FR 36043, 3 CFR, 1980 Comp., p. 257. 2. Section 133.34 is revised to Amendatory Language read as follows: 133.34 What are the tolls for Section Heading vessels in ballast? In order for a vessel to secure the Regulatory Text reduced rate of toll for vessels in ballast, it may not carry any passengers or cargo nor any fuel for its own consumption in a quantity which exceeds: (a) 125 percent of the volume of its engine room as measured and as shown on its Panama Canal tonnage certificate; or (b) The spaces on the vessel which are available for the carriage of fuel. Multiple amendments. Describe all changes to one section in a single instruction, and display changed text for the section immediately following the instruction. (See instruction 2 in example 63.) If there are many changes to one section, use a list format. (See example 62.) Example 62. 941.103 [Amended] 3. Amend 941.103 as follows: a. Remove the definitions of "Allocation area", "Application", "Central city allocation area", "Community", "Field Office", "Housing Assistance Plan", "Household type", and "Housing type"; b. Remove the parenthetical phrase "(in the form prescribed by HUD)" from the definition "Construction Contract" and "Contract of sale"; and c. Remove from the definition of "Total development cost (TDC)" the term "The Field Office" and add in its place the term "HUD", and remove from that definition the parenthetical sentence at the end. When there are changes to several sections, use separate numbered instructions for each section, and display the changed text for each section after the instruction. (See instructions 2 through 4 in example 63.) Example 63: Changes to several sections. PART 1258--FEES 1. The authority citation for part 1258 continues to read as follows: Authority: 44 U.S.C. 2116(c). 2. Amend 1258.2 by revising paragraphs (a) and (c)(3) to read as follows: 1258.2 Applicability. (a) Except as stated in this section, fees for the reproduction of NARA administrative records, archival records, donated historical materials, and records filed with the Office of the Federal Register are in 1258.12. * * * * * (c) * * * (3) Motion picture, sound, and video recording materials are among the holdings of the National Archives and Records Administration. Obtain prices for reproduction of these materials from the Motion Picture and Sound and Video Branch, National Archives and Records Administration, Washington, DC 20408. * * * * * 3. Amend 1258.4 by revising paragraph (b) to read as follows: 1258.4 Exclusions. * * * * * (b) When NARA wishes to disseminate information about its activities to the general public through press, radio, television, and newsreel representatives; * * * * * 4. Amend 1258.10 by revising paragraph (a) to read as follows: 1258.10 Mail orders. (a) The agency charges a minimum fee of $6.00 per order for reproductions it mails to the customer. * * * * * Group all amendments to the same CFR unit together in one instruction. (See examples 64 and 65.) Example 64. Revise paragraphs (a), (d), (e), and (n) of 150.5 to read as follows: Example 65. Remove and reserve 33.1, 33.5 and 33.10. Introductory text. If you revise the introductory text of a section or a paragraph, and not the whole section or paragraph, specify the introductory text. (See example 66.) Example 66. In 1020.3, revise paragraph (a) introductory text, and paragraphs (a)(1) and (a)(4) to read as follows: 1020.3 What are the qualifications and duties of the Small Business Ombudsman? (a) The Chairman will appoint a senior, full-time Commission employee as Small Business Ombudsman. The Ombudsman must: (1) Know the Commission's statutes and regulations; * * * * * (4) Perform the Ombudsman duties in addition to, and consistently with, other Commission responsibilities. * * * * * 2.14 Asterisks. If you add or revise only certain units of a section, the amendatory language must state exactly which units are added or revised, and only those units are printed. Use asterisks to represent text which is not changed. Use of 5 asterisks. Use 5 asterisks to show that a whole paragraph, including its subordinate paragraphs, is unchanged. In example 67, the 5 asterisks before revised paragraph (d) show that paragraphs (a), (b) and (c) remain unchanged. The 5 asterisks that follow revised paragraph (d) show that the remaining text in the section is also unchanged. Example 67: Use of 5 asterisks. Revise paragraph (d) of 166.15 to read as follows: 166.15 State status. * * * * * (d) The following States issue licenses under cooperative agreements with the Animal and Plant Health Inspection Service, but do not have primary enforcement responsibility under the Act: Kentucky, Maryland, Puerto Rico, Texas, and Washington. * * * * * Use of 3 asterisks. Use 3 asterisks when you change text at a subordinate level. This shows that the higher level paragraphs remain unchanged. In example 68, the 5 asterisks before paragraph (b) show that paragraph (a) remains unchanged. The 3 asterisks following "(b)" show that (b)(1) through (b)(4) remain unchanged, and the 3 asterisks following "(5)" show that the introductory text of (b)(5) is unchanged. The 5 asterisks that follow revised paragraph (b)(5)(i) show that the remaining text in the section is unchanged. Example 68: Use of 3 asterisks. Revise 202.3(b)(5)(i) to read as follows: 202.3 Registration of copyright. * * * * * (b) * * * (5) * * * (i) The Library of Congress receives two complimentary copies promptly after publication of each issue of the serial. * * * * * We strongly recommend that you use no more than 3 paragraph levels. Use of more than 3 paragraph levels makes your rule hard to read and use. (See paragraph structure chart in example 48.) The smallest unit you may revise is a sentence. When you revise only a sentence of a paragraph, use 3 asterisks to show that the remaining sentences in the paragraph are unchanged. (See example 69.) Example 69. Amend 416.916 by revising the first sentence to read as follows: 416.916 What will happen if I fail to submit medical and other evidence? You (and, if you are a child, your parent, guardian, relative, or other person acting on your behalf) must cooperate in furnishing us with, or in helping us to obtain or identify, available medical or other evidence about your impairment(s). * * * Example 70: Use of both 3 and 5 asterisks in the same document. PART 216--REGULATIONS GOVERNING THE TAKING Part Heading AND IMPORTING OF MARINE MAMMALS 1. The authority citation for part 216 Authority Citation continues to read as follows: Authority: 16 U.S.C. 1361-1407. 2. Revise paragraph (b)(1)(v), the Amendatory Language first sentence of paragraphs (b)(3) and (c)(2), and paragraph (c)(4)(i) introductory text; and add paragraph (b)(1)(vi) to 216.24 to read as follows: 216.24 Taking and related acts Section Heading incidental to commercial fishing operations. * * * * * Indicates Paragraph (a) Unchanged (b) * * * Indicates Paragraph (b) Introductory Text Unchanged (1) * * * Indicates Paragraphs (b)(1) Introductory Text And (b)(1)(I) through (Iv) Unchanged (v) Category 5: Other gear. Revises Paragraph Commercial fishing operations (b)(1)(v) utilizing trolling, gillnets, hook and line gear, and any gear not classified under paragraphs (b)(1)(i) and (b)(1)(ii) of this section. (vi) Category 6: Commercial passenger Adds Paragraph fishing vessel operation. Commercial (b)(1)(vi) fishing operations from a commercial passenger fishing vessel for the purpose of active sport fishing as defined in 216.3. * * * * * Indicates Paragraph (b)(2) Unchanged (3) Submit the original and two Revises First Sentence copies of the application for general of Paragraph (b)(3) permit to the Assistant Administrator. * * * Indicates Remainder of Paragraph (b)(3) Unchanged * * * * * Indicates Paragraphs (b)(4) through (7) Unchanged (c) * * * Indicates Paragraph (c) Introductory Text and (c)(1) Unchanged (2) Operator's certificate of inclusion. Revises Paragraph You must hold a valid operator's (c)(2). certificate of inclusion if you are the person in charge of and actually controlling fishing operations (after this referred to as the operator) on a vessel engaged in commercial fishing operations for which a Category 2 or Category 6 general permit is required under this subpart. You may not transfer this certificate. You have a valid certificate only for a vessel having a valid vessel certificate of inclusion for the same category. In order to receive a certificate of inclusion, the operator must satisfactorily complete required training. You must renew your operator's certificate of inclusion annually. * * * * * Indicates Paragraph (c)(3) Unchanged (4) * * * Indicates Paragraph (c)(4) Introductory Text Unchanged (i) Category 1, 3, 4, 5, and 6 Revises Paragraph applications: (c)(4)(i) Introductory Text * * * * * Indicates Remainder of Section Unchanged 2.15 Cross-references. We permit you to cross-reference your own or another agency's rules in limited situations. If you are applying the referenced rules to current or future situations, you may only reference rules that are currently in effect. If you must modify the referenced rules, you cannot use a cross- reference. You must publish the modified rules in full. You may cross-reference the rules of another agency only if the reference meets any of the following conditions specified in 1 CFR 21.21: The reference is required by court order, statute, Executive order, or reorganization plan; The reference is to rules promulgated by an agency with the exclusive legal authority to regulate in a subject matter area, but the eferencing agency needs to apply those rules in its own programs; The reference is informational or improves clarity rather than being regulatory; The reference is to test methods or consensus standards produced by a Federal agency that have replaced or preempted private or voluntary test methods or consensus standards in a subject matter area; or The reference is to the departmental level from a subagency. When cross-referencing, you must identify the CFR unit being cited by the proper CFR unit designation in each reference. Do not use a nonspecific reference, such as "herein," "above," or "below." Example 71 illustrates the proper style for each common type of cross- reference. Example 71: CFR cross-references. References to a different TITLE In title 6, when referencing title 1, chapter I write ... 1 CFR chapter I In title 6, when referencing title 1, chapter I, part 2 write ... 1 CFR part 2 In title 6, when referencing title 1, chapter I, part 2, 2.7 write ... 1 CFR 2.7 In title 6, when referencing title 1, chapter I, part 2, 2.7, paragraph (a)(2) write ... 1 CFR 2.7(a)(2) References within the same TITLE In chapter I, when referencing chapter II write ... chapter II of this title In part 100 (chapter I), when referencing part 300 (chapter III) write ... part 300 of this title In 250.10 (chapter I), when referencing 300.19 (chapter III) write ... 300.19 of this title References within the same CHAPTER In part 20, when referencing part 30 write ... part 30 of this chapter In 20.10, when referencing subpart A of part 30 write ... part 30, subpart A of this chapter In 20.10, when referencing 30.19 write ... 30.19 of this chapter References within the same PART In 20.5, when referencing subpart A of part 20 write ... subpart A of this part In 20.5, when referencing 20.15 write ... 20.15 In 20.5, when referencing 20.15, paragraph (a) write ... 20.15(a) In 20.5, when referencing Appendix A to part 20 write ... Appendix A of this part References within the same SECTION In paragraph (a), when referencing paragraph (b) write ... paragraph (b) of this section In paragraph (a), when referencing paragraph (b)(1) write ... paragraph (b)(1) of this section In paragraph (a)(1), when referencing paragraph (a)(2) write ... paragraph (a)(2) of this section In paragraph (a)(1)(i), when referencing paragraph (a)(1)(ii) write ... paragraph (a)(1)(ii) of this section Example 72: Citing text within a section. Note. For purposes of this example, we display citations in bold type. Do not do this in your document. 233.17 Noncompliance and program reporting by the Director. The Director must prepare quarterly and annual reports as detailed in paragraphs (a) and (b) of this section and must submit them to the Regional Administrator. (a) Quarterly reports for State 404 programs. The Director must submit noncompliance reports for section 404 discharges specified under 233.24(f)(1)(i) through (iv) containing the following information: (1) Name, location, and permit number of each noncomplying permittee; and (2) A brief description and date of each instance of noncompliance, which must include the following: (i) Any unauthorized discharges of dredged or fill material subject to the State's jurisdiction or any noncompliance with permit conditions; and (ii) A description of investigations conducted and of any enforcement actions taken or contemplated. (b) Annual report for State 404 programs. The State Director must submit an annual report assessing the cumulative impacts of the State's permit program on the integrity of State regulated waters. This report must include: (1) The number and nature of individual permits issued by the State during the year; (2) The number of acres for each of the categories of waters in paragraph (b)(1) of this section which were filled or which received any discharge of dredge material during the year; (3) The number and nature of permits issued under emergency conditions, as provided in 234.38 of this chapter; and (4) The approximate number of persons in the State discharging dredged or fill material under general permits and an estimate of the cumulative impacts of these activities. Signature Block 2.16 Who can sign my document? Your agency determines who may sign a document submitted for publication in the Federal Register. The signer must sign in ink. (See section 8.5.) We recommend that the signer use blue ink. A signature in black ink is often difficult to distinguish from a photocopy. Type the name and title of the person signing the document directly beneath the handwritten signature. (See example 73.) When a person signs a document for another person, type the name and title of the person who actually signs the document beneath the signature. (See example 74.) We will reject a document signed by one person for another. We will not accept your document if you sign someone else's name and you place your initials by the signature. Example 73. [Cynthia James] Cynthia James, Director. Example 74. [Thomas Shadwell] Thomas Shadwell, Deputy Director. or [Thomas Shadwell] Thomas Shadwell, Acting Director. Do not place a signature block on a page by itself. Placing text on the signature page helps to ensure the integrity of the document. You may place the signature block either at the end of the document (See example 75.) or between the preamble and the rest of the document. (See example 76.). Example 75. Preamble Text Signature Example 76. Preamble Signature Text 2.17 Do I need a signature date? We recommend but do not require a signature date. When you furnish one, use the date of actual signature. We will not accept a postdated signature or change a signature date. If there is a problem with a signature date, we will return your document to your Liaison Officer. Style and Format Requirements 2.18 What should my rule document look like? [ GRAPHIC OMITTED ] Capitals. Type in all capital letters: The name of the agency or cabinet-level department (but not the name of the subagency) in the heading of a document. "FEDERAL REGISTER" in the parenthetical for dates that we are to compute. Preamble captions: Example 77: Preamble captions. AGENCY: ACTION: SUMMARY: DATES: ADDRESSES: FOR FURTHER INFORMATION CONTACT: SUPPLEMENTARY INFORMATION: Copies. Provide legible copies. Correction or adhesive tape. Do not use correction or adhesive tape. Double-spacing. Type the text of your document double-spaced. Headings. Type document headings centered or flush with the left margin. Type section headings: Flush with the left margin. Underlined. On a line separate from the text of the section. Using the symbol. Margins. One inch at the top, bottom, and right side. One and one-half inches on the left side. Page numbers. Number the pages consecutively in one of the following places: Centered top. Centered bottom. Upper right-hand corner. Paper. You must prepare your documents on 8«" X 11" white paper. Quotation marks. Use quotation marks for names of books, journals, articles, and similar items. Quoted material. Type quoted material: Single-spaced. Centered-block style. Without quotation marks. Single-sided copy. You must type your document on one side only. Single-spacing. Type the following single-spaced: Quoted material. Footnotes. Tables of contents. Examples. Tables. Notes to Tables. Authority citations. Notes. Formulas. Underlining. Underlining instructs the printer to present material in italics. Use underlining for: Definitions (underline only the terms) Paragraph headings Scientific terms Ordering statements Court cases The section heading in the text of the rule (the heading will appear in bold type in the Federal Register) Federal Register, when referring to the name of the publication (except type in all capital letters in the parenthetical for dates that we are to compute). Do not use underlining for: Emphasis Names of books Foreign phrases. Abbreviations. Use the following abbreviations in the Federal Register. FR is Federal Register. (Do not use Fed. Reg. or F.R.) (See example 78.) CFR is Code of Federal Regulations. (Do not use C.F.R.) (See example 79.) U.S.C. is United States Code. Pub. L. is Public Law. (Do not use P.L.) Stat. is U.S. Statutes at Large. a.m. or p.m. is time designation. E.O. is Executive order. Proc. is Proclamation. sec. is section of a Public Law or the United States Code. Use the abbreviations for "Pub. L.", "E.O.", and "Proc." only in the authority citation. All other times you must spell them out. (See examples 37 and 39.) [section] Symbol. Use the [section] symbol only for a CFR section and [double section] symbol only for multiple sections. However, do not use a [section] symbol to begin a sentence; instead, spell out the word. Do not use the [section] symbol or the word "section" when the reference follows a title number and CFR as in 36 CFR 1200.1. Style. Use the "U.S. Government Printing Office Style Manual" as a guide for punctuation, capitalization, spelling, compounding, and other style matters. You may obtain the GPO Style Manual from the Superintendent of Documents, Government Printing Office. References. If your document relates to a previously published Federal Register document, you must cite the earlier document. A reference in a preamble to a previously published Federal Register document must identify the volume number, page number, and date of the issue in which the document appeared. (See example 78.) Example 78. Reference to a previously published Federal Register document. 6x FR 12345, Jul. 23, 199x A reference in a preamble to material contained in the CFR should identify the CFR title and part or section number. (See example 79.) Example 79. Reference to material contained in the CFR. 36 CFR part 1200 36 CFR 1200.1 2.19 Example of a rule document. 7515-01 NATIONAL ARCHIVES AND RECORDS ADMINISTRATION 36 CFR Part 1253 RIN 3095-AA64 Suitland Research Room Closure AGENCY: National Archives and Records Administration. ACTION: Final rule. SUMMARY: The National Archives and Records Administration (NARA) will close the Suitland Research Room at the Washington National Records Center and establish an appointment system for using archival records remaining in the Washington National Records Center. We will also establish new public research room hours at the Washington National Records Center. The use of the research room has declined since moving the archival records of the Washington National Records Center to archival facilities in Washington, DC, and College Park, MD. After May 1, researcher use of the remaining archival records at the Washington National Records Center is expected to be no more than three visits per week. DATES: [INSERT DATE 30 DAYS AFTER DATE OF PUBLICATION IN THE FEDERAL REGISTER]. 1 FOR FURTHER INFORMATION CONTACT: Sharon Records, 301-000-0000. SUPPLEMENTARY INFORMATION: Beginning May 6, 199x, researchers must make advance arrangements for the use of any archival Federal records remaining in the Washington National Records Center. The last transfer of archival records from Suitland is August 30, 199x. Call the Suitland Reference Branch at 301-000-0000, Monday through Friday, 8:00 a.m. to 4:30 p.m. for information on the availability of archival records or advance arrangements to use archival records which have not yet been closed for move preparation. Normally NARA requires one-day notice. When feasible you may make same day arrangements. Agencies or researchers needing access to agency records still stored at the Washington National Records Center continue to call 301-000-0000 or 301-000-0001 for appointments. After May 3, 199x, shuttle service for researchers from the National Archives and Records Administration Building in Washington, DC to the Washington National Records Center will be discontinued. It is not cost-effective to operate the research room on its current schedule, 8:00 a.m. to 4:30 p.m., Monday through Friday, for the expected use of the room. There will be little or no impact on the public because archival records will continue to be made available to researchers. 2 The National Archives and Records Administration considers this rule to be a procedural rule which is exempt from notice-and-comment under 5 U.S.C. 533(b)(3)(A). This rule is not a significant rule for purposes of Executive Order 12866 and has not been reviewed by the Office of Management and Budget. As required by the Regulatory Flexibility Act, NARA certifies that these regulatory amendments will not have a significant impact on small business entities. List of Subjects in 36 CFR Part 1253 Archives and records. For the reasons set forth in the preamble, amend part 1253 of title 36 of the Code of Federal Regulations as follows: PART 1253--LOCATION OF RECORDS AND HOURS OF USE 1. The authority citation for part 1253 continues to read: Authority: 44 U.S.C. 2104(a). 2. Revise 1253.4 to read as follows: 1253.4 Washington National Records Center. Washington National Records Center, 4205 Suitland Road, Suitland, MD. Mailing address: Washington National Records Center, 4205 Suitland Road, Washington, DC 20409-0002. Hours: 8:30 a.m. to 4 p.m., Monday through Friday. From May 6, 3 199x, through August 30, 199x, make appointments to use archival records at the center by calling the Suitland Reference Branch at 301-000-0000. Dated: March 27, 199x. Signature Type name, Title. 4 Interim Rule and Direct Final Rule 2.20 Interim rule. The interim rule responds to an emergency situation and is usually followed by a rule document which confirms that the interim rule is final and may include further amendments. You may request comments in an interim rule and address the comments received in the final rule that adopts the interim rule as final. Or, based on the comments, you may decide to keep the interim rule effective while going through proposed rulemaking. If an interim rule is in effect as of the revision date of the CFR Title it amends, we will include it in the CFR. Example 80: Interim rule adopted as final without change. PART 78 -- BRUCELLOSIS Accordingly, the interim rule amending 9 CFR part 78 which was published at 6x FR 12345 on February 11, 199x, is adopted as a final rule without change. Example 81: Interim rule adopted as final with change. Accordingly, the interim rule amending 9 CFR part 51 which was published at 6x FR 12345 on November 26, 199x, is adopted as a final rule with the following change: PART 51 -- ANIMALS DESTROYED BECAUSE OF BRUCELLOSIS 1. The authority citation for part 51 continues to read as follows: Authority: 42 U.S.C. 594. 2. Amend 51.9 by revising paragraph (h) to read as follows: 51.9 Claims not allowed. * * * * * (h) In the opinion of the Veterinarian in charge, a brucellosis reactor animal may remain in the herd if a reasonable search has been made for the brucellosis reactor animal and the brucellosis reactor animal could not be found and removed. 2.21 Direct final rule. A direct final rule is not preceded by a proposed rule. It may be used for routine and noncontroversial regulations that your agency believes will not generate adverse comment. A direct final rule becomes effective on a specific future date, unless adverse comment is received on the rule within a specified comment period before that date. If adverse comment is received, your agency withdraws the rule before its effective date. A confirmation document is optional. If you receive no adverse comment, your agency is not required to confirm the effective date of the direct final rule, unless you stated in the rule that you would follow-up with a confirmation document. Special requirements. In addition to the general requirements for rule documents, some special requirements apply. You must: Provide both an effective date and a comment date. Explain that the rule is conditional on the nonreceipt of adverse comments. State that if your agency does receive adverse comments, it will publish a timely Federal Register document that withdraws the rule. Provide an address for comments. See example 82 for a recommended DATES caption in a direct final rule. Example 82: DATES caption in a direct final rule. DATES: This rule is effective [INSERT DATE 90 DAYS AFTER DATE OF PUBLICATION IN THE FEDERAL REGISTER] without further action, unless adverse comment is received by [INSERT DATE 30 DAYS AFTER DATE OF PUBLICATION IN THE FEDERAL REGISTER]. If adverse comment is received, [YOUR AGENCY] will publish a timely withdrawal of the rule in the Federal Register. Withdrawal of a direct final rule. A "timely withdrawal" means that your agency commits to publish a document in the Rules category of the Federal Register withdrawing the direct final rule on or before its effective date. If you fail to withdraw the rule by its effective date, you must amend the CFR to restore the previous regulatory text or remove any text added by the direct final rule. Allow enough time between the close of the comment period and the rule's effective date to prepare and publish a withdrawal document, if one is needed. We recommend you allow at least 60 days between the close of the comment period and the effective date. Withdraw the entire rule if a withdrawal is necessary. Withdrawing only a portion can be confusing to the regulated public. If partial withdrawal is essential, you may only withdraw text that was to be added -- at the CFR paragraph level or higher -- or an entire amendatory instruction and the text that follows it. If you must withdraw a direct final rule, you may issue another direct final rule, or a separate proposed rule document, on the same subject. You may publish a companion proposed rule document in the same issue of the Federal Register as the direct final rule. Then, if you withdraw the direct final rule, that proposed rule can be the prerequisite for a regular final rule. This technique may minimize delays in establishing a final effective date. Example 83: DATES caption in a withdrawal of a direct final rule. DATES: The direct final rule published at 6x FR 12345, May 15, 199x is withdrawn, effective [SPECIFY A DATE ON OR BEFORE THE EFFECTIVE DATE OF THE DIRECT FINAL RULE]. Checklist for rule documents 2.22 Checklist for rule documents. Use the following checklist to review your rule document before you submit it to us: Billing code. Is the billing code at the top of the first page in the right-hand corner? (See sections 2.3, 2.18, and 2.19.) Headings. Are the correct headings used? (See section 2.4.) Preamble. Are all required elements of the preamble included? Does the SUMMARY answer all three questions? (See section 2.5.) List of subjects. Are subject terms listed for each CFR part affected? Are they placed at the end of the preamble? (See section 2.6.) Words of issuance. Have you provided a link between the preamble and the regulatory text? Do not use "proposed" in a rule document's words of issuance . (See section 2.7) Authority citation. Is the authority citation correctly placed in the document? ( See section 211.) Amendatory language. (See section 2.13.) Does it specify the exact CFR unit being changed? Does it use the correct terms? Table of contents. Is the table of contents included for each subpart or part being set out in full? (See section 2.10.) Do entries agree with the regulatory text? Paragraphs. Are all paragraphs of regulatory text indented and lettered or numbered correctly? (See section 2.12.) Asterisks. Have you set out section headings and asterisks for partial section amendments? (See section 1.14) Cross-references. (See section 2.15.) Is the correct style used? Do references meet our criteria? Tables and illustrations. (See chapter 7) Are they placed exactly where they are to be printed? Are they completely legible? Are charts and maps of photographic quality? OMB Control Number. If included with the regulatory text, is it placed properly and in the correct style? (See section 8.19.) Signature and title. (See section 2.16.) Is the original signature (handwritten in ink) included on the document? (One person may not sign for another or initial a signature.) Is the signer's name and title typed beneath the signature? If a signature date is given, is it correct? Quality. (See section 2.18.) Are original(s) and certified copies legible? Is the document free of correction or adhesive tape? Are ink changes printed, dated, and initialed on all three copies? (See chapter 4.) Is the document double-spaced? Page numbers. Are all pages numbered consecutively? (See section 2.18.) Matching copies and certification. (See sections 2.18 and 8.5.) Are the original and two copies identical? Are all pages included? Are the copies properly signed or certified? Disks. (See chapter 5.) If you have included a disk with your document: Is every document on a separate disk? Is the file on the disk identical to the signed original document? Did you include the verification/certification letter, stating that the file and document are identical? Is your document the only file on the disk? Did you save the file to the disk in ASCII or WordPerfect 6.1 format? Does the disk have a label that identifies your agency, the document's subject, the file name, and file format? Is the disk virus-free? Are the file and disk free of password protection or other security measures?