Pacific Northwest Research Station

Title: AUTOSAW simulations of lumber recovery for small-diameter Douglas-fir and ponderosa pine from southwestern Oregon.

Author: Barbour, R. James; Parry, Dean L.; Punches, John; Forsman, John; and Ross, Robert.

Date: 2003

Source: Res. Note PNW-RN-543. Portland, OR: U.S. Department of Agriculture, Forest Service, Pacific Northwest Research Station. 11 p

Station ID: RN-PNW-543

Description: Small-diameter (5- to 10-inch diameter at breast height) Douglas-fi r (Pseudotsuga menziesii (Mirb.) Franco) and ponderosa pine (Pinus ponderosa Dougl. ex Laws) trees were assessed for product potential by diagramming the location, size, and type of knots visible on the wood surface (inside bark) and using the AUTOSAW sawing simulator to evaluate the resulting log descriptions. The logs were then sawn to dimension lumber, dried, and graded. More than 85 percent of the resulting Douglas-fir lumber was assigned to the "No. 2 and better" group, whereas about 50 percent of the pine was assigned to the "Standard and better" group. AUTOSAW consistently underestimated (by 10 to 15 percent) the volume recovered from the logs. A correction factor could be applied to compensate for this variance. The simulator predicted higher yields of higher grade lumber than were obtained empirically. This was anticipated given the programÂ’s inability to account for knots hidden beneath the wood surface. Alternative sawing scenarios examined by using AUTOSAW suggest that greater value could have been recovered from the small-diameter Douglas-fir if it had been cut to 1- or 5/4-inch thickness and graded as "Factory" lumber. The ponderosa pine would have been more valuable cut to 1-inch thickness and graded as "Common" rather than dimension lumber.

Keywords: Small-diameter timber, volume recovery, AUTOSAW, sawing simulation, value recovery, wood product value

View and Print this Publication (436 KB)

Publication Notes: 

• We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
• This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
• You may send email to pubrequest@fs.f ed.us to request a hard copy of this publication. (Please specify exactly which publication you are requesting and your mailing address.)

 Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

Citation

Barbour, R. James; Parry, Dean L.; Punches, John; Forsman, John; and Ross, Robert.  2003.  AUTOSAW simulations of lumber recovery for small-diameter Douglas-fir and ponderosa pine from southwestern Oregon..   Res. Note PNW-RN-543. Portland, OR: U.S. Department of Agriculture, Forest Service, Pacific Northwest Research Station. 11 p