Publication Information
Title: New curing system for urea-formaldehyde resins with polyhydrazides. I. Curing with poly(methycrylol hydrazide)
Author: Miyake, Katsumasa; Tomita, Bunichiro; Hse, Chung-Yun; Myers, George E.
Date: 1989
Source: Mokuzai Gakkaishi 35(8):736-741
Description: A new curing system for urea-formaldehyde (UF) resins was investigated using poly(methacryloyl hydrazide) as the curing reagent. Results were as follows: 1) Gel time and the water-soluble part of cured resins were determined as function of pH and molar ratio [hydrazide group/(free formaldehyde+methylol group)]. It was found that the reaction in this system proceeds for a short time under neutral conditions, and that the reaction of hydrazide groups with UF resin involves two stages with the second stage occuring at a rather high temperature. 2) The adhesive shear strength of lap-joint specimens prepared under the new system was comparable to that by conventional curing with ammonium chloride, although it decreased after watersoaking at 60°C. 3) The adhesive strength of plywood specimens decreased as the molar ratio increased.
Keywords:
View and Print this Publication (912 KB)
Publication Notes:
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility
Citation
Miyake, Katsumasa; Tomita, Bunichiro; Hse, Chung-Yun; Myers, George E. 1989. New curing system for urea-formaldehyde resins with polyhydrazides. I. Curing with poly(methycrylol hydrazide). Mokuzai Gakkaishi 35(8):736-741
|