Airports Series 150 Advisory Circular Library
Advisory Circular Search Results
Search Criteria:
Category - Passenger Facility Charge (PFC)
Number of Advisory Circulars found - 71
Sorted by column "AC Number", ascending
Instructions: Click on a column heading (e.g. AC Number, Title, Publication Date) in the table below to sort the search results by that heading.
AC Number | Title, Description, Files | Publication Date |
150/5000-12
Responsible Office |
ANNOUNCEMENT OF AVAILABILITY: PASSENGER FACILITY CHARGE (PFC) APPLICATION (FAA FORM 5500-1)
Provides guidance for the submission of the PFC application. View more recent versions of the PFC Application.
150/5000-12 (PDF)
|
July 15, 1994 |
150/5000-13A
Responsible Office |
ANNOUNCEMENT OF AVAILABILITY: RTCA INC., DOCUMENT RTCA-221
Announces the availability of RTCA, Inc., Document RTCA/DO-221, Guidance and Recommended Requirements for Airport Surface Movement Sensors, dated April 24, 1994. Provides recommended minimum performance standards for airport surface movement sensors and specifies both sensor and system characteristics that provide guidance to airport systems designers, manufacturers, installers, and users of the equipment.
150/5300-13A (PDF)
|
September 5, 2008 |
150/5070-6B
Responsible Office |
AIRPORT MASTER PLANS
Provides guidance for the preparation of airport master plans that range in size and function from small general aviation to large commercial service facilities. Appendix D of this AC cancels Chapter 1, Section 5; Appendix 6; and Appendix 7 of AC 150/5300-13, Airport Design. Consolidated file contains Change 1.
150/5070-6B Change 1 (Consolidated) (PDF)
|
May 1, 2007 |
150/5200-28D
Responsible Office |
NOTICES TO AIRMEN (NOTAMS) FOR AIRPORT OPERATORS
Provides guidance on using the NOTAM system for airport condition reporting and describes significant changes to the format of Distant (D) and Local (L) NOTAMs.
150/5200-28D (PDF)
|
January 28, 2008 |
150/5200-30C
Responsible Office |
AIRPORT WINTER SAFETY AND OPERATIONS
This advisory circular (AC) provides guidance to assist airport operators in developing a snow and ice control plan, conducting and reporting runway friction surveys, and establishing snow removal and control procedures. Version B of this AC cancelled AC 150/5220-13B, Runway Surface Condition Sensor Specification Guide, dated March 27, 1991.
AC 150/5200-30C (PDF)
|
December 9, 2008 |
150/5200-33B
Responsible Office |
HAZARDOUS WILDLIFE ATTRACTANTS ON OR NEAR AIRPORTS
Provides guidance on certain land uses that have the potential to attract hazardous wildlife on or near public-use airports. It also discusses airport development projects (including airport construction, expansion, and renovation) affecting aircraft movement near hazardous wildlife attractants.
150/5200-33B (PDF)
|
August 28, 2007 |
150/5210-5C
Responsible Office |
PAINTING, MARKING, AND LIGHTING OF VEHICLES USED ON AN AIRPORT
Provides guidance, specifications, and standards for painting, marking, and lighting of vehicles operating in the airport air operations area (AOA).
AC 150/5210-5C (PDF)
|
August 31, 2007 |
150/5210-7D
Responsible Office |
AIRCRAFT RESCUE AND FIRE FIGHTING COMMUNICATIONS
Provides guidance to assist airport operators in preparing for Aircraft Rescue and Fire Fighting (ARFF) communications.
150/5210-7D (PDF)
|
April 14, 2008 |
150/5210-13B
Responsible Office |
WATER RESCUE PLANS, FACILITIES, AND EQUIPMENT
Provides guidance on preparing for water rescue operations.
150/5210-13B (PDF)
|
April 15, 2004 |
150/5210-14B
Responsible Office |
AIRCRAFT RESCUE FIRE FIGHTING EQUIPMENT, TOOLS AND CLOTHING
Contains references to the minimum requirements for the selection and performance of aircraft rescue and firefighting personal protective equipment (PPE), self contained breathing apparatus (SCBA), and powered rescue tools. Designed to assist airport management in the development of local procurement specifications for airport fire departments.
150/5210-14B (PDF)
|
September 30, 2008 |
150/5210-15A
Responsible Office |
AIRCRAFT RESCUE AND FIREFIGHTING STATION BUILDING DESIGN
Contains information, references and guidelines for construction of Aircraft Rescue and Fire Fighting (ARFF) station building design.
150/5210-15A (PDF)
|
September 10, 2008 |
150/5210-18A
Responsible Office |
SYSTEMS FOR INTERACTIVE TRAINING OF AIRPORT PERSONNEL
Provides guidance in the design of systems for interactive training of airport personnel, which are eligible for funding under the Airport Improvement Program (AIP) and with Passenger Facility Charge (PFC) revenues.
150/5210-18A (PDF)
|
September 29, 2008 |
150/5210-19
Responsible Office |
DRIVER'S ENHANCED VISION SYSTEM (DEVS)
Contains performance standards, specifications, and recommendations for DEVS.
150/5210-19 (PDF)
|
December 23, 1996 |
150/5220-4B
Responsible Office |
WATER SUPPLY SYSTEMS FOR AIRCRAFT FIRE AND RESCUE PROTECTION
Provides guidance for the selection of a water source and standards for the design of a distribution system to support aircraft rescue and firefighting (ARFF) service operations on airports.
150/5220-4B (PDF)
|
July 29, 1992 |
150/5220-10D
Responsible Office |
GUIDE SPECIFICATION FOR AIRCRAFT RESCUE AND FIRE FIGHTING VEHICLES
Contains information, references, and guidelines for a family of aircraft rescue and fire fighting (ARFF) vehicles. Vehicles meeting this standard satisfy Title 14 Code of Federal Regulations (CFR) Part 139, Certification of Airports, and meet the requirements for airport response to aircraft fire fighting.
150/5220-10D (PDF)
|
September 24, 2007 |
150/5220-16C
Responsible Office |
AUTOMATED WEATHER OBSERVING SYSTEMS (AWOS) FOR NON-FEDERAL APPLICATIONS
Contains the FAA standard for non-Federal Automated Weather Observing Systems.
150/5220-16C (PDF)
|
December 13, 1999 |
150/5220-17A
Responsible Office |
DESIGN STANDARDS FOR AN AIRCRAFT RESCUE AND FIREFIGHTING TRAINING FACILITY
Contains standards, specifications, and recommendations for the design of an aircraft rescue and firefighting training facility utilizing either propane or a flammable liquid hydrocarbon (FLH) as the fuel.
150/5220-17A (PDF)
|
January 31, 1992 |
CHANGE 1
Incorporates Chapter 4, Mobile ARFF Training Devices, which provides the standards, specifications, and recommendations for the design of mobile ARFF training devices.
150/5220-17A Change 1 (PDF)
|
November 24, 1998 |
150/5220-18A
Responsible Office |
BUILDINGS FOR STORAGE AND MAINTENANCE OF AIRPORT SNOW AND ICE CONTROL EQUIPMENT AND MATERIALS
Provides guidance for the site selection and design of buildings used to store and maintain airport snow and ice control equipment, store approved materials, and provide personnel areas required to support the requirements under the airport operator’s winter storm management plan.
150/5220-18A (PDF)
|
September 14, 2007 |
150/5220-20
Responsible Office |
AIRPORT SNOW AND ICE CONTROL EQUIPMENT
Provides guidance to airport operators on the procurement of snow and ice control equipment for airport use.
150/5220-20 (PDF)
|
June 30, 1992 |
CHANGE 1
Provides guidance to airport operators involved in the procurement of snow sweepers to control ice and snow at airports during inclement weather.
150/5220-20 Change 1 (PDF)
|
March 1, 1994 |
150/5220-21B
Responsible Office |
GUIDE SPECIFICATION FOR DEVICES USED TO BOARD AIRLINE PASSENGERS WITH MOBILITY IMPAIRMENTS
Contains performance standards, specifications, and recommendations for the design, construction, and testing of devices used to assist in the boarding of airline passengers with mobility impairments.
150/5220-21B (PDF)
|
March 17, 2000 |
150/5220-22A
Responsible Office |
ENGINEERED MATERIALS ARRESTING SYSTEMS (EMAS) FOR AIRCRAFT OVERRUNS
Contains standards for the planning, design, and installation of EMAS in runway safety areas.
150/5220-22A (PDF)
|
September 30, 2005 |
150/5300-14B
Responsible Office |
DESIGN OF AIRCRAFT DEICING FACILITIES
Provides standards, specifications, and guidance for designing aircraft deicing facilities.
150/5300-14B (PDF)
|
February 5, 2008 |
150/5300-16A
Responsible Office |
GENERAL GUIDANCE AND SPECIFICATIONS FOR AERONAUTICAL SURVEYS: ESTABLISHMENT OF GEODETIC CONTROL AND SUBMISSION TO THE NATIONAL GEODETIC SURVEY
Explains the specifications for establishing geodetic control on or near an airport. It also describes how to submit the information to the National Geodetic Survey (NGS) for approval and inclusion in the National Spatial Reference System (NSRS) in support of aeronautical information surveys.
150/5300-16A (PDF)
|
September 15, 2007 |
150/5300-17B
Responsible Office |
GENERAL GUIDANCE AND SPECIFICATIONS FOR AERONAUTICAL SURVEY AIRPORT IMAGERY ACQUISITION AND SUBMISSION TO THE NATIONAL GEODETIC SURVEY
Provides the specifications for Airport Imagery acquisition and how to submit the imagery for review and approval in support of aeronautical information and airport engineering surveys.
150/5300-17B (PDF)
|
September 29, 2008 |
150/5300-18B
Responsible Office |
GENERAL GUIDANCE AND SPECIFICATIONS FOR SUBMISSION OF AERONAUTICAL SURVEYS TO NGS: FIELD DATA COLLECTION AND GEOGRAPHIC INFORMATION SYSTEM (GIS) STANDARDS - PLANNING GUIDANCE ONLY
This version of AC 150/5300-18B is for Planning Guidance Only for use in projects being worked in this year.
150/5300-18B - Planning Guidance Only (Complete) (PDF)
|
May 8, 2008 |
150/5320-5C
Responsible Office |
SURFACE DRAINAGE DESIGN
Provides guidance for engineers, airport managers, and the public in the design and maintenance of airport surface drainage systems. Combines existing surface drainage topics covered in different agency manuals into one Unified Facilities Criteria (UFC) document that will serve as the design and analysis standard for surface drainage for FAA and the Department of Defense.
150/5320-5C (Complete) (PDF)
|
September 29, 2006 |
150/5320-6D
Responsible Office |
AIRPORT PAVEMENT DESIGN AND EVALUATION
Provides guidance to the public for the design and evaluation of pavements at civil airports.
150/5320-6D (Part 1) (PDF)
|
January 30, 1996 |
CHANGE 1
Corrects errors in the graph for Figure 2-4, Effect of Subbase on Modulus of Subgrade Reaction, and changes a typographical error in paragraph 339b.
150/5320-6D Change 1 (PDF)
|
January 30, 1996 |
CHANGE 2
Incorporates recent changes and corrections.
150/5320-6D Change 2 (PDF)
|
June 3, 2002 |
CHANGE 3
Incorporates recent changes and corrections. This AC cancels AC 150/5320-16, Airport Pavement Design for the Boeing 777 Airplane.
150/5320-6D Change 3 (PDF)
|
April 30, 2004 |
CHANGE 4
Provides design guidance for paved airfield shoulders and rubblization of existing Portland Cement Concrete (PCC) pavements prior to asphalt overlay. Revises guidance on required design flexural strength for rigid pavement design.
150/5320-6D Change 4 (PDF)
|
June 23, 2006 |
150/5320-12C
Responsible Office |
MEASUREMENT, CONSTRUCTION, AND MAINTENANCE OF SKID RESISTANT AIRPORT PAVEMENT SURFACES
Contains guidelines and procedures for the design and construction of skid-resistant pavement; pavement evaluation, without or with friction equipment; and maintenance of high skid-resistant pavements.
150/5320-12C (PDF)
|
March 18, 1997 |
CHANGE 1
Updates names and addresses of FAA-approved CFME.
150/5320-12C Change 1 (PDF)
|
April 16, 2004 |
CHANGE 2
Updates references to polymer-based runway surface chip seals to account for current materials technology.
150/5320-12C Change 2 (PDF)
|
September 2, 2004 |
CHANGE 3
Updates names and addresses of FAA-approved CFME.
150/5320-12C Change 3 (PDF)
|
August 25, 2004 |
CHANGE 4
Updates names and addresses of FAA-approved CFME.
150/5320-12C Change 4 (PDF)
|
February 3, 2005 |
CHANGE 5
Updates names and addresses of FAA-approved CFME.
150/5320-12C Change 5 (PDF)
|
April 15, 2005 |
CHANGE 6
Updates names and addresses of FAA-approved CFME.
150/5320-12C Change 6 (PDF)
|
May 25, 2005 |
CHANGE 7
Updates names and addresses of FAA-approved CFME.
150/5320-12C Change 7 (PDF)
|
December 5, 2005 |
CHANGE 8
Updates list of FAA-approved CFME.
150/5320-12C Change 8 (PDF)
|
February 7, 2007 |
150/5320-14
Responsible Office |
AIRPORT LANDSCAPING FOR NOISE CONTROL PURPOSES
Provides guidance to airport planners and operators in the use of tree and vegetation screens in and around airports.
150/5320-14 (PDF)
|
January 31, 1978 |
150/5320-15A
Responsible Office |
MANAGEMENT OF AIRPORT INDUSTRIAL WASTE
Provides basic information on the characteristics, management, and regulations of industrial wastes generated at airports. Provides guidance for the development of a Storm Water Pollution Prevention Plan (SWPPP) that applies best management practices to eliminate, prevent, or reduce pollutants in storm water runoff associated with particular airport industrial activities.
150/5320-15A (PDF)
|
September 8, 2008 |
150/5325-4B
Responsible Office |
RUNWAY LENGTH REQUIREMENTS FOR AIRPORT DESIGN
Provides design standards and guidelines for determining recommended runway lengths.
150/5325-4B (PDF)
|
July 1, 2005 |
150/5335-5A
Responsible Office |
STANDARDIZED METHOD OF REPORTING AIRPORT PAVEMENT STRENGTH – PCN
Provides guidance for using the standardized International Civil Aviation Organization (ICAO) method to report airport pavement strength. The standardized method is known as the Aircraft Classification Number – Pavement Classification Number (ACN-PCN) method.
150/5335-5A (PDF)
|
September 28, 2006 |
150/5340-1J
Responsible Office |
STANDARDS FOR AIRPORT MARKINGS
Describes the standards for markings used on airport runways, taxiways, and aprons.
150/5340-1J (PDF)
|
April 29, 2005 |
CHANGE 1
Extends enhanced taxiway centerline requirement to all certificated airports. Airports with less that 1.5 million annual passenger enplanements must implement the enhanced taxiway centerline within 1 year. All smaller certificated airports have 2 years. Cancelled by Change 2.
150/5340-1J Change 1 (PDF)
|
March 31, 2008 |
CHANGE 2
Clarifies the intent of Change 1 and modifies certain compliance dates for airports located in areas that receive snow or ice storms. Cancels Change 1.
150/5340-1J Change 2 (PDF)
|
June 6, 2008 |
150/5340-5C
Responsible Office |
SEGMENTED CIRCLE AIRPORT MARKER SYSTEM
Sets forth standards for a system of airport marking consisting of certain pilot aids and traffic control devices.
150/5340-5C (PDF)
|
September 14, 2007 |
150/5340-18E
Responsible Office |
STANDARDS FOR AIRPORT SIGN SYSTEMS
Contains the Federal Aviation Administration standards for the siting and installation of signs on airport runways and taxiways. Incorporates mandatory hold signs that reflect changed standards for the Precision Obstacle Free Zone (POFZ) and Category (CAT II/III) operations. Includes sign standards to assist airport operators in designating (1) the POFZ holding position in those instances where a taxiway, holding apron, or other movement area would result in an aircraft fuselage or tail penetrating, and (2) the alternative holding position on a taxiway during CAT II/III operations necessary to maintain adequate aircraft separation.
150/5340-18E (PDF)
|
September 12, 2008 |
150/5340-30D
Responsible Office |
DESIGN AND INSTALLATION DETAILS FOR AIRPORT VISUAL AIDS
Provides guidance and recommendations on the installation of airport visual aids. Because of the size of the document, it is available as one large file (see Complete) or as five smaller files (see Parts 1-6).
150/5340-30D (Complete) (PDF)
|
September 30, 2008 |
150/5345-3F
Responsible Office |
SPECIFICATION FOR L-821, PANELS FOR THE CONTROL OF AIRPORT LIGHTING
Provides the specified manufacturing requirements for panels used for remote control of airport lighting and auxiliary systems.
150/5345-3F (PDF)
|
September 28, 2007 |
150/5345-5B
Responsible Office |
CIRCUIT SELECTOR SWITCH
Contains a specification for a circuit selector switch for use in airport lighting circuits.
150/5345-5B (PDF)
|
September 14, 2006 |
150/5345-7E
Responsible Office |
SPECIFICATION FOR L-824 UNDERGROUND ELECTRICAL CABLE FOR AIRPORT LIGHTING CIRCUITS
Describes the specification requirements for L-824 electrical cables.
150/5345-7E (PDF)
|
August 2, 2001 |
150/5345-10F
Responsible Office |
SPECIFICATION FOR CONSTANT CURRENT REGULATORS REGULATOR MONITORS
Contains a specification for constant current regulators used on airport lighting circuits and for a monitor that reports on the status of the regulator.
150/5345-10F (PDF)
|
June 24, 2005 |
150/5345-12E
Responsible Office |
SPECIFICATION FOR AIRPORT AND HELIPORT BEACON
Contains equipment specifications for light beacons which are used to locate and identify civil airports, military airports, seaplane bases, and heliports.
150/5345-12E (PDF)
|
November 17, 2005 |
150/5345-13B
Responsible Office |
SPECIFICATION FOR L-841 AUXILIARY RELAY CABINET ASSEMBLY FOR PILOT CONTROL OF AIRPORT LIGHTING CIRCUITS
Contains the specification requirements for a relay cabinet used to control airfield lighting circuits. The L-841 consists of an enclosure containing a direct current (DC) power supply, control circuit protection and 20 pilot relays.
150/5345-13B (PDF)
|
September 20, 2007 |
150/5345-26D
Responsible Office |
FAA SPECIFICATION FOR L-823 PLUG AND RECEPTACLE, CABLE CONNECTORS
Contains the specification for plug and receptacle (cable connectors) used with underground power cables, isolation transformer leads, and light fixture leads for airport lighting systems.
150/5345-26D (PDF)
|
September 30, 2008 |
150/5345-27D
Responsible Office |
SPECIFICATION FOR WIND CONE ASSEMBLIES
Contains a specification for wind cone assemblies to be used to provide wind information to pilots of aircraft.
150/5345-27D (MS Word)
|
June 2, 2004 |
150/5345-28F
Responsible Office |
PRECISION APPROACH PATH INDICATOR (PAPI) SYSTEMS
Contains the Federal Aviation Administration (FAA) standards for Precision Approach Path Indicator (PAPI) systems, which provide pilots with visual glideslope guidance during approach for landing.
150/5345-28F (PDF)
|
April 12, 2005 |
150/5345-39C
Responsible Office |
SPECIFICATION FOR L-853, RUNWAY AND TAXIWAY RETROREFLECTIVE MARKERS
Contains the FAA standards for retroreflective markers for airport runways and taxiways. See also Errata Sheet below.
150/5345-39C (PDF)
|
September 14, 2006 |
150/5345-42F
Responsible Office |
SPECIFICATION FOR AIRPORT LIGHT BASES, TRANSFORMER HOUSINGS, JUNCTION BOXES, AND ACCESSORIES
Contains the specifications for containers designed to serve as airport light bases, transformer housings, junction boxes, and accessories. Provides the basic standard requirements for critical dimensions and performance requirements to which all manufacturers must demonstrate compliance.
150/5345-42F (PDF)
|
October 17, 2006 |
150/5345-43F
Responsible Office |
SPECIFICATION FOR OBSTRUCTION LIGHTING EQUIPMENT
Contains the FAA specification for obstruction lighting equipment.
150/5345-43F (PDF)
|
September 12, 2006 |
150/5345-44H
Responsible Office |
SPECIFICATION FOR TAXIWAY AND RUNWAY SIGNS
Contains the FAA specifications for unlighted and lighted signs to be used on taxiways and runways.
150/5345-44H (PDF)
|
September 28, 2007 |
150/5345-45C
Responsible Office |
LOW-IMPACT RESISTANT (LIR) STRUCTURES
Contains the FAA specifications for low-impact resistant (LIR) structures used to support approach lighting systems (ALS) at airports.
150/5345-45C (PDF)
|
April 6, 2007 |
150/5345-46C
Responsible Office |
SPECIFICATION FOR RUNWAY AND TAXIWAY LIGHT FIXTURES
Contains FAA specifications for light fixtures to be used on airport runways and taxiways.
150/5345-46C (PDF)
|
September 12, 2006 |
150/5345-47B
Responsible Office |
SPECIFICATION FOR SERIES TO SERIES ISOLATION TRANSFORMERS FOR AIRPORT LIGHTING SYSTEMS
Contains the specifications requirements for series-to-series isolation transformers for use in airport lighting systems.
150/5345-47B (PDF)
|
June 30, 2005 |
150/5345-49C
Responsible Office |
SPECIFICATION L-854, RADIO CONTROL EQUIPMENT
Contains the specifications for radio control equipment to be used for controlling airport lighting facilities.
150/5345-49C (PDF)
|
June 27, 2007 |
150/5345-50B
Responsible Office |
SPECIFICATION FOR PORTABLE RUNWAY AND TAXIWAY LIGHTS
Contains the FAA standards for portable runway and taxiway lights and runway end identifier lights for temporary use to permit continued aircraft operations while all or part of a runway lighting system is inoperative.
150/5345-50B (PDF)
|
September 20, 2007 |
150/5345-51A
Responsible Office |
SPECIFICATION FOR DISCHARGE-TYPE FLASHING LIGHT EQUIPMENT
Contains the specifications for discharge-type flashing light equipment to be used for runway end identifier lights (REIL) and for an omnidirectional approach lightning system (ODALS).
150/5345-51A (PDF)
|
September 19, 2005 |
150/5345-52A
Responsible Office |
GENERIC VISUAL GLIDESLOPE INDICATORS (GVGI)
Contains the FAA standards for generic visual glideslope indicators systems. GVGI systems provide pilots with visual glideslope guidance during approaches for landing at general aviation airports.
150/5345-52A (PDF)
|
September 5, 2007 |
150/5345-53C
Responsible Office |
AIRPORT LIGHTING EQUIPMENT CERTIFICATION PROGRAM
Describes the Airport Lighting Equipment Certification Program (ALECP). See also the Addendum and an explanation of FAA's interim Non-Original Equipment Manufacturer (OEM) Parts Certification Program.
150/5345-53C (PDF)
|
September 30, 2005 |
150/5345-53C ADDENDUM
Addendum to Appendices 1, 3, and 4 of AC 150/5345-53C.
150/5345-53C Addendum (PDF)
|
December 15, 2008 |
150/5345-54A
Responsible Office |
SPECIFICATION FOR L-884 POWER AND CONTROL UNIT FOR LAND AND HOLD SHORT LIGHTING SYSTEMS.
Contains the FAA standards for power and control units for Land and Hold Short Lighting Systems.
150/5345-54A (PDF)
|
August 9, 2000 |
CHANGE 1
Corrects paragraph 3.3.1.4, Painting and Finishing.
150/5345-54A Change 1 (PDF)
|
June 29, 2001 |
150/5345-55A
Responsible Office |
SPECIFICATION FOR L-893, LIGHTED VISUAL AID TO INDICATE TEMPORARY RUNWAY CLOSURE
Provides guidance in the design of a lighted visual aid to indicate temporary runway closure.
150/5345-55A (PDF)
|
June 27, 2007 |
150/5360-9
Responsible Office |
PLANNING AND DESIGN OF AIRPORT TERMINAL FACILITIES AT NON-HUB LOCATIONS
Provides guidance material for the planning and design of airport terminal buildings at non-hub locations.
150/5360-9 (Complete) (PDF)
|
April 4, 1980 |
150/5360-12E
Responsible Office |
AIRPORT SIGNING AND GRAPHICS
Provides guidance on airport related signs and graphics. Recommends use of 'Guidelines for Airport Signing and Graphics' (American Association of Airport Executives, the Airports Council International - North America, the Air Transport Association of America, and the Airport Consultants Council, 2001) in designing airport terminal signing systems until an updated manual, currently being developed under the Airport Cooperative Research Program, is available. At international airports, also recommends International Civil Aviation Organization (ICAO) Document 9636, 'International Signs to Provide Guidance to Persons at Airports and Marine Terminals (1995)'.
150/5360-12E (PDF)
|
September 18, 2008 |
150/5360-13
Responsible Office |
PLANNING AND DESIGN GUIDELINES FOR AIRPORT TERMINAL FACILITIES
Provides guidelines for the planning and design of airport terminal buildings and related access facilities. Consolidated file includes Change 1.
150/5360-13 (Consolidated) (Complete) (PDF)
|
April 22, 1988 |
150/5370-2E
Responsible Office |
OPERATIONAL SAFETY ON AIRPORTS DURING CONSTRUCTION
Provides guidance on operational safety on airports---with special emphasis on safety during periods of construction activity---to assist airport operators in complying with Part 139, Certification of Airports.
150/5370-2E (PDF)
|
January 17, 2003 |
150/5370-10C
Responsible Office |
STANDARDS FOR SPECIFYING CONSTRUCTION OF AIRPORTS
Provides standards for the construction of airports. Items covered include general provisions, earthwork, flexible base courses, rigid base courses, flexible surface courses, rigid pavement, fencing, drainage, turfing, and lighting installation. See Errata Sheet below.
150/5370-10C (Complete) (PDF)
|
September 29, 2007 |
150/5370-11A
Responsible Office |
USE OF NONDESTRUCTIVE TESTING DEVICES IN THE EVALUATION OF AIRPORT PAVEMENT
Provides guidance on the use of nondestructive testing equipment to evaluate the load-carrying capacity of airport pavements.
150/5370-11A (PDF)
|
December 29, 2004 |
150/5370-15
Responsible Office |
AIRSIDE APPLICATIONS FOR ARTIFICIAL TURF
Provides guidance for the planning, design, installation, and maintenance of aviation grade artificial turf in areas adjacent to the operational areas of an airport.
150/5370-15 (PDF)
|
September 29, 2007 |
150/5370-16
Responsible Office |
RAPID CONSTRUCTION OF RIGID (PORTLAND CEMENT CONCRETE) AIRFIELD PAVEMENTS
Provides guidance for the planning, coordination, management, design, testing, inspection, and execution of rapid construction of rigid (Portland Cement Concrete) airfield pavements. This AC focuses on rigid airfield pavement construction. The material contained herein also applies to other types of airfield improvements where rapid construction is identified as the preferred construction method.
150/5370-16 (PDF)
|
September 28, 2007 |
150/5380-6B
Responsible Office |
GUIDELINES AND PROCEDURES FOR MAINTENANCE OF AIRPORT PAVEMENTS
Provides guidelines and procedures for maintaining rigid and flexible airport pavements.
150/5380-6B (Complete) (PDF)
|
September 28, 2007 |
150/5390-2B
Responsible Office |
HELIPORT DESIGN
Provides recommendations for heliport design that apply to the construction, activation, and deactivation of heliports.
150/5390-2B (Complete) (PDF)
|
September 30, 2004 |
150/5390-3
Responsible Office |
VERTIPORT DESIGN
Provides guidance to planners and communities interested in developing a civil vertiport or vertistop.
150/5390-3 (PDF)
|
May 31, 1991 |
150/5395-1
Responsible Office |
SEAPLANE BASES
Provides guidance to assist operators in planning, designing, and constructing seaplane base facilities.
150/5395-1 (PDF)
|
June 29, 1994 |
---|