 |
|
|
|
|
|
|
| The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS.
|
 |
|
|
|
Health Effects
|
|
From MSDS
EFFECTS OF OVEREXPOSURE
Ingestion: Very large doses can cause vomiting, diarrhea, and prostration.
Skin Contact: Not expected to be a health hazard.
Eye Contact: May cause irritation.
Inhalation: Inhalation of dust may cause mild irritation to mucous membranes, nose and throat. Symptoms may include coughing, dryness and sore throat. Acute Systemic Effects: Dehydration and congestion may occur in internal organs. Hypertonic salt solutions can produce inflammatory reactions in the gastrointestinal tract.
|
From MSDS
No information available.
|
From MSDS
No information available.
|
From MSDS
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes. Call a physician.
Skin Contact: Wash exposed area with soap and water. Get medical attention if irritation develops.
Inhalation: Remove to fresh air. Get medical attention for any breathing difficulty.
Ingestion: If large amounts were swallowed, get medical advice.
|
| N |
| N |
| N |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe;
N = No information provided by manufacturer; * = Chronic Health Hazard |
| 2003-07-01 |
|
|
|
|
|
|
|
|
Handling/Disposal
|
From MSDS
Transport in dry equipment. Storage should be in a dry location.
Spill protection: containerize for reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust dispersal.
|
From MSDS
What can not be reclaimed may be delivered to an approved waste disposal facility, or if local ordinances allow, can be dissolved in sufficient amounts of water to meet water quality standards, and flushed down the sewer drain. Insure compliance with local, state and federal regulations. Some States have set a maximum limit on chlorides in waste effluent. The only practical way of meeting the limits is to dilute the waste with additional water.
|
|
|
|
|
|
|
|
|
Ingredients from MSDS/Label
|
|
|
|
|
|
|
|
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
|
|
