 |
|
|
|
|
|
|
| The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS.
|
 |
|
|
|
Health Effects
|
|
| IMPORTANT! Read before using. Keep away from eyes. Avoid prolonged contact with skin. Rinse product from skin with generous amounts of fresh water. If irritation should occur, consult a physician. Do not take internally. If swallowed, consult a physician immediately. Store product in a cool, dry place. Recap container after use. Discard container when empty. KEEP OUT OF REACH OF CHILDREN. Bar Code: 0-39645-99021-6 (#9902) |
From MSDS
Formaldehyde is readily detected due to its irritant properties. The odor detection level varies among different individuals between 0.2 to 1 ppm. In addition, acclimation will occur from repeated exposure but sensitivity returns following rest periods away from the atmosphere containing formaldehyde. Whether a risk exists at levels below the odor threshold has not been determined. There are no symptoms of ingestion.
|
From MSDS
Although formaldehyde is a minor volatile component of these emulsions products, it is important to recognize that recent test results have shown formaldehyde to cause cancer in laboratory animals.
|
From MSDS
Although formaldehyde is a minor volatile component of these emulsions products, it is important to recognize that recent test results have shown formaldehyde to cause cancer in laboratory animals.
|
| N |
| N |
| N |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe;
N = No information provided by manufacturer; * = Chronic Health Hazard |
| 1994-03-29 |
|
|
|
|
|
|
|
|
Handling/Disposal
|
From MSDS
Normal cleanliness should be observed. Store in a cold place, avoid freezing, minimize contact with air to prevent inoculation with microorganisms which can cause decomposition and moldy overgrowth. If headspace ventilation is required, use humidified air to reduce skin formation on the emulsion surface.
|
From MSDS
For small spills (probably less than 100 gallons), dilute with water. Wash into industrial sewer. (WARNING: Consult local sewer authority before discharging). MSDS: For large quantities, place in settling pond and add ferric chloride and lime. Decant water. Dispose of solids in landfill. Emulsion can be incinerated directly under appropriate conditions.
|
|
|
|
|
|
|
|
|
Ingredients from MSDS/Label
|
|
|
|
|
|
|
|
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
|
|
