Item No. | Description | Points Deducted |
05 | PW system halogen analyzer maintained, operated, calibrated | 0 |
08 | PW filling hoses, caps, connections, procedures; Sample records, valves; PW system constructed, maintained | 0 |
17 | Temperature practices storage, preparation display, service, transportation; Thawing | 0 |
21 | Nonfood-contact surfaces designed, constructed, maintained, installed, located | 0 |
22 | Dishwashing / equipment washing facilities designed, constructed, maintained, installed, located, operated, TMDs, test kits | 0 |
26 | Food-contact surfaces equipment / utensils clean; Safe | 0 |
30 | Hand cleanser, sanitary towels, waste receptacles, handwash signs; maintenance | 0 |
33 | Decks / bulkheads / deckheads construction, repair, clean | 0 |
33 | Decks / bulkheads / deckheads construction, repair, clean | 1 |
34 | Plumbing fixtures / supply lines / drain lines / drains installed, repair | 0 |
37 | Rooms / equipment vented, humidity, condensation | 0 |
|
Selected Item Details
|
Item No.:
05
|
|
Site:
Potable Water- |
Violation:
THE FAR POINT CHLORINE ANALYZER READ 0.66 AND THE MANUAL TEST WAS 1.10. THE ENGINEERS STATED THAT THEY HAD RECENTLY CHANGED THE HALOGEN PROBE AND THAT IT TAKES SOME TIME FOR THE CALIBRATION TO SETTLE. |
Recommendation:Ensure that the free residual halogen measured by the halogen analyzer is ±0.2 mg/L (ppm) of the free residual halogen measured by the manual test. |
|
|