Licensable Technologies
: Materials
Materials
Preparation Of BIS-(1(2)H-Tetrazol-5-Yl)-Amine Monohydrate
3D MEMS Fabrication Technique
A Methanol Sensor Operated in a Driven Mode
Acoustic Levitator / Concentrator
Adjustable DC and Pulsed Circuit Fault Current Limiter
Air Breathing Direct Methanol Fuel Cell
Air Breathing Direct Methanol Fuel Cell
Aligned-Crystalline Silicon Film on Glass
Antithrombogenic and Antibiotic Compositions and Methods of Preparation Thereof
Apparatus for Measurement of Critical Current in Superconductive Tapes (Cryogenic Linear Translator)
Architecture for High Critical Current Superconducting Tapes
Biaxially-Oriented Oxide Film on Polyimide
Biaxially-Oriented Silicon Film on Conducting Layer on Metal Tape
Biaxially-Oriented Silicon Film on Polycrystalline/Amorphous Template
Buffer Layers On Metal Alloy Substrates For Superconducting Tapes
Bulk Nanostructured Superhard B-C-N Materials
Capacitively Coupled RF Diamond-Like-Carbon Reactor
Carbon Nanotube Separations by Electronic Type and Chirality
Carrier Multiplication in Quantum-Confined Semiconductor Materials
CATALYST INKS AND METHOD OF APPLICATION FOR DIRECT METHANOL FUEL CELLS
Cathode Catalyst for Direct Methanol Fuel Cells
Chemical Synthesis of Water-Soluble, Chiral Conducting Polymer Complexes
Colloidal Quantum Dot Light Emitting Diode (CQDLED)
Combinatorial Nano-Chemistry - Method and Apparatus
COMBUSTION SYNTHESIS OF NANO-STRUCTURED METAL FOAMS
Compact Magnetic Energy Storage Module
COMPLEX GRAPHITIC STRUCTURES BY DESIGN
Continuous Processing of Ultrafine Grained Materials by ECAP-Conform
Corrosion Protection
Corrosion Test Cell for Bipolar Plate Materials
Cubic Metal Oxide Film Buffers for IBAD MgO Templates Amenable for High Rate Reactive Sputter Deposition
Diamond Anvil Cell For Spectroscopic Investigation Of Materials At High Temperature, High Pressure And Shear
Direct Methanol Fuel Cell and System
Distributed Cooling for High Temperature Supoerconducting Power Cables
Dual Ion-Beam Assisted Deposition of Bi-Axially Textured Cubic Magnesium Oxide Template Layers
DYPAK: A Porous Membrane Material for Use as Structured Packing in Distillation
Efficient Direct Methanol Fuel Cell Stack
Electrochemical Supercapacitors
Electrodes for Solid State Gas Sensor
Enhanced methanol utilization in direct methanol fuel cell
Enhanced Photophysics of Conjugated Polymers
Enhancement of Persistent Currents In High-Tc Superconductors
Essing of High Density Mgb2 Wires and Tapes by Hot Isostatic Pressing
Fabrication of Polyelectrolyte Multilayered Thin Films Via Self-Assembly
Fluidized Bed Deposition Of Diamond
Fuel Cell Membrane Humidification
Fuel Cell with Interdigitated Porous Flow-Fields
Fuel Cell with Metal Screen Flow-Field
Gold Coated Nanoparticles for Biotechnology Applications
Hafnium Radioisotope Recovery from Irradiated Tantalum
High Critical Current Superconducting Tapes
High Performance, Nanosized Grain AlON for Optical Applications
High Power Density Direct Methanol Fuel Cell Stack Design
High Temperature Superconducting Composite Conductor and Method for Manufacturing the Same
High Temperature Superconducting Composites and Manufacture of Same
High-Rate Buffer Layer for IBAD MGO Coated Conductors
Hybrid Catalyst for Selective Catalytic Reduction of NOx
Hydrogen Scavengers
Hydrogen-Evolving Organic Compunds
Hydrostatic Extrusion Of Cu-ag Melt Spun Ribbon
Large Volume Flow-through Scintillating Detector
Lattice Engineering of IBAD Textured Templates
Lead-Free Electric Match Compositions
Long Carbon Nanotube Arrays for Fiber Spinning
Low resistance metal connectors and nanowires
Low-Power Atmospheric Pressure Mini-Plasma and Array for Surface and Material Treatment
Manufacturing Ultra-Tall Carbon Nanotube Forests
Material for Producing High Temperatures
Mechanical Locking and Spray Shadowing for Stress Relief in Thick Plasma Sprayed Coatings
Membrane Architectures for Ion-Channel Switch-Based Electrochemical Biosensors
Membrane Catalyst Layer for Fuel Cells
Membrane Catalyst Layer for Fuel Cells
Meniscus Membranes for Separations
Metallization Of Electronic Insulators
Methanol Sensor Operated in a Passive Mode
Method and Apparatus for Depositing a Coating on a Tape Carrier
Method and Apparatus for In-Process Sensing of Manufacturing Quality
Method For Coating The Inside Of Narrow Tubes By Chemical Vapor Deposition
Method for Determining Current Densities Using External Magnetic Field Measurements
Method for Implantation of High Dopant Concentrations in GaN
Method for Improvement of IBAD Texturing on Substrates Made in Continuous Mode
Method for Preparation of Semiconductive Films
Method for Producing Carbon Nanotubes
Method For Producing Fluorinated Diamond-Like Carbon Films
Method for Producing Metallic Microparticles
Method for Producing Metallic Nanoparticles
Method For Producing Spherical Ceramic Particles and Agglomerates
Method for Producing Ultrafine-Grained Materials Using Repetitive Corrugation and Straightening
Method For Simultaneous Recovery Of Hydrogen From Water And From Hydrocarbons
Method of Transferring an Ultra-Thin Layer of Crystalline Material with High Crystalline Quality
Method of Transferring an Ultra-Thin Layer of Crystalline Material With High Crystalline Quality
Method of Transferring an Ultra-Thin Layer of Crystalline Silicon with High Crystalline Quality
Method of Transferring Strained Semiconductor Structures
Methods for Segmenting Coated Conductor Tape for Reduced AC Losses
Microwave Sintering of Single Plate-shaped Articles
Mixed Potential Hydrocarbon Sensor with Low Sensitivity to Methane and CO
Molybdenum Disilicide Alloy Matrix Composite
Molybdenum Disilicide Matrix Composite
Multifunctional Nanocrystals
Multiple Feed Powder Splitter
Nano-Scale Tungsten Oxides Materials and Synthesis
Nanoparticle Cerium Doped Lathanum Bromide (Ce:LaBr3) and the Process of Making the Same
Neutron Capture Induced Radiation Treatment Of Polymer Matrials
New Architecture for Coated Conductors
Non-Contact Pumping Of Light Emitters Via Non-Radiative Energy Transfer
Nonlinear Characterization of Material Changes
Novel Electrochromic Copolymer with Well Defined Molecular Structure and Oxidation States
Optically Transparent, Scratch-Resistant, Diamond-Like Carbon Coatings
Ordered Nanocomposite Silica Films for Matrix-Free Mass Spectrometry
Photopolymerization-Based Fabrication of Chemical Sensing Films
Plasma Torch Generation Of Spherical Nano Oxide Particles
Polyaniline-Based Optical Ammonia Detector
POLYMER-ASSISTED DEPOSITION (PAD) OF FILMS
Polymer-Assisted Depositions of Nitride Films
Polymer-Doped Nanocomposite Silica Thin Films
Polyolefin Oil/water Separator
Preparation Of Energetic Nanopowders
Preparation of Energy Storage Materials
Preparation of Fibers From a Supported Array of Nanotubes
Preparation Of Fullerene/glass Composites
Production of Carbon-Coated Nanoparticles
Puncture Detecting Barrier Materials
Quantum Dot Optical Amplifiers and Lasers
Quantum Dots Incorporated into Thin Films
Rare Earth Activated Lutetium Oxyorthosilicate
Reactive Projectiles Comprised of Metastable Intermolecular Composites
Recovery of Small Molecules from Aqueous Streams
Reduced Ac Loss High Temperature Coated Conductor
Reduced AC Loss High Temperature Superconducter
Reversible Modification of Carbon Nanotube Electronic Properties for Sensors and Electronics Applications
Semiconductor Micro-wires
Simplified Architecture for Coated Conductors
Solid State Oxygen Sensor
Solid State Oxygen Sensor (I)
Spherical Boron Nitride Particles and Method for Preparing Them
Spiral flow field and bipolar plate for fuel cell stack
Stabilization of Polyaniline Solutions Through Additives
Stable, Concentrated Solutions of Polyaniline Using Amines as Gel Inhibitors
Strengthening Aerogels by Chemical Vapor Deposition
Substrate Heater for Thin Film Deposition
Superconducting Composite Structures
Superconducting Current Controller
Superconducting Microcircuitry by the Microlithographic Patterning of Superconducting Compounds and Related Materials
Superconductive Article Including Cerium Oxide Layer
Synthesis of Bipbsrcacuo Superconductor
Synthesis of Carbon Nanotube Cotton
Synthesis of Magnesium Diboride by Magnesium Vapor Infiltration Process (MVIP)
Synthesis of Zeolites in Reverse microemulsions, HighAspect RatioCrystals, and Novel Materials.
Tape Casting Method for the Manufacture of Sensors
Technology for Fabrication of a Micromagnet on a Tip of a MFM/MRFM Probe
The LASAG (Los Alamos Solid Aerosol Generator)
Thermal Contraction Compensation Mechanism for Cryogenic or Superconducting Power Cables
Thermally Tolerant Multilayer Metal Membrane
Thermoset Molecular Composites
Thin Film Mixed Potential Sensors
Titanium-tantalum Alloys
Use of 2 4 8 10 Tetranitro 5h Pyrido 3 2 4 5 1 2 3 Triazolo 1 2 A Benzotriazol 6 Ium Inner Salt as a Thermally Stable High Explosive
Use of 4,4 6,6-tetra(azido)azo- 1,3,5-triazine and 3,6-di(azido)-1,2,4,5-terazine to prepare carbon nitrides and nano-materials
Use of High Current Density Electropolishing for the Preparation of Very Smooth Substrate Tapes for Coated Conductors Applications
UV Absorbent Nanomaterials
Variable Impulse Explosive Device Using Microwave Energy and Microwave Sensitized Explosives
Variable Inductance Power Transmission Cable
Volatile Chemical Reagent Detector
Water-soluble Conductive Polymers (i)
Water-soluble Conductive Polymers (ii)
Waveguide-Based Optical Chemical Sensors
Wide band gap semiconductor templates