 |
|
|
|
|
|
|
| The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS.
|
 |
|
|
|
Health Effects
|
|
| This product contains ingredients which may cause skin irritation on certain individuals and a preliminary test according to accompanying directions should first be made. This product must not be used for dyeing the eyelashes or eyebrows; to do so may cause blindness. |
From MSDS
HEALTH HAZARDS
Harmful if swallowed, inhaled, or absorbed through skin. This product may cause serious irritant, respiratory, and/or allergic reactions in sensitive individuals. May cause skin and severe eye irritation. May cause severe irritation of gastric mucous membranes if swallowed.
SIGNS AND SYMPTOMS OF EXPOSURE
Irritation of eyes, skin and mucous membranes. Possible irritant/allergic dermatitis and respiratory signs and symptoms, the onset of which may be delayed.
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE
Existing dermatological conditions, such as eczema, and respiratory conditions, such as bronchial asthma and/or chronic bronchitis, may be exacerbated.
|
From MSDS
See Acute Health Hazards
|
From MSDS
Not listed as carcinogen by NTP, IARC or OSHA.
|
From MSDS
First Aid for Hair Dye Component
If swallowed, call a physician, hospital emergency room, or poison control center immediately. Induce vomiting ONLY if recommended by medical personnel. Get prompt medical attention. If affected by inhalation, move to fresh air. If symptoms persist, get medical attention. If eye or skin contact occurs, immediately flush with water and get medical attention if irritation occurs.
First Aid for Developer Component
If swallowed, drink two glasses of water or milk. Call a physician, hospital emergency room, or poison control center immediately. Do NOT induce vomiting. Get medical attention. If in eyes, flush with water for at least 15 minutes and get medical attention. If on skin, flush with water, then wash with soap and plenty of water. Consult a physician if irritation occurs.
|
| N |
| N |
| N |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe;
N = No information provided by manufacturer; * = Chronic Health Hazard |
| 2003-02-26 |
|
|
|
|
|
|
|
|
Handling/Disposal
|
From MSDS
Handling and Storage of Dye Component
Use only with adequate ventilation and avoid inhalation. Avoid contact with eyes and skin (other than areas of application). Do not inhale or ingest. Prepare and use in a well-ventilated area. To assure maximum shelf life, avoid direct sunlight.
For external use only. Use only as directed. Keep out of reach of children. Patch test is intended to identify skin reaction only; it will not necessarily predict sensitization or irritation secondary to inhalation. Read the product package insert completely.
Handling and Storage of Developer Component
Do not use or store near fuels, solvents, or other organic materials. Avoid iron, zinc, and reducing agents. Store in a cool place away from direct sunlight. Keep out of reach of children.
For external use only. Use only as directed.
|
From MSDS
Disposal of Dye Component
This material is not regulated under RCRA. Accordingly, incineration at a non-hazardous waste treatment facility is the preferred method of disposal.
Disposal of Developer Component
Although (<8%) hydrogen peroxide solutions are NOT regulated as hazardous wastes under RCRA, physical and/or chemical deactivation/degradation of the peroxide solution is the required method of treatment and disposal for these products.
|
|
|
|
|
|
|
|
|
Ingredients from MSDS/Label
|
|
|
|
|
|
|
|
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
|
|
