Mine Safety and Health Administration
Protecting Miners' Safety and Health Since 1978
|
U.S. Department of Labor Mine Safety and Health Administration Protecting Miners' Safety and Health Since 1978 |
|
 |
www.msha.gov |  |
| Find It! in DOL | Compliance Assistance | |
|
2007-01-A&CC The following products were approved or certified during October 2006, and have been added to the Mine Safety and Health Administration's list of permissible equipment. The following products were approved as having met Part 7, Title 30 CFR. 1. Model 5030TF270 Diesel Engine. Approval No. 07-ENA060007-0, issued to John Deere Power Systems, P.O. Box 8000, Gate C Ridgeway Ave., Waterloo, Iowa 50704, October 6, 2006. 2. Model 4024TF270 Diesel Engine. Approval No. 07-ENA060008-0, issued to John Deere Power Systems, P.O. Box 8000, Gate C Ridgeway Ave., Waterloo, Iowa 50704, October 6, 2006. 3. Frame 18041, Direct Current Motor. Approval No. 07-JA060007-0, issued to C.A.I. Industries, 2736 Ken Gray Boulevard, West Frankfort, Illinois 62896, October 4, 2006. 4. Model 100, 001 Alternating Current Motor. Approval No. 07-JA060010-0, issued to Southern Electric and Machine Company, c/o Plumley Dynamics, P.O. Box 205, Macarthur, West Virginia 25873, October 31,2006. 5. Type TFC T10500J Cable. Approval No. 07-KA060016-0, issued to Times Fiber Communications, Inc., 380 Tightsqueeze Industrial Road, Chatham, Virginia 24531, October 16, 2006. 6. Type TFC T10500JZHLS Cable. Approval No. 07-KA060017-0, issued to Times Fiber Communications, Inc., 380 Tightsqueeze Industrial Road, Chatham, Virginia 24531, October 16, 2006. 7. "RADIAFLEX RCF" Cable. Approval No. 07-KA060018-0, issued to Radio Frequency Systems, Inc., 200 Pondview Drive, Meriden, Connecticut 06450, October 27, 2006. 8. Type S946T-06-XXY Fiber Optic Cable. Approval No. 07-KA060019-0, issued to Draka Cableteq, USA Inc., 22 Joseph Warner Blvd., Dighton, Massachusetts 02764, October 20, 2006. The following products were approved or certified as having met Part 18, Title 30 CFR. 1. Model AWI CT27-B-5-64, Direct Current Coal Transporter. Approval No. 18A060029-0, issued to Auxier Welding, Inc., P.O. Box 99, Belva, West Virginia 26656, October 26, 2006. 2. Model 362205 Junction Box Assembly. Certification No. 18-XPA060015-0, issued to DBT America, 2045 West Pike Street, Houston, Pennsylvania 15342, October 20, 2006. The following products were accepted as having met the flame requirements of Part 18, Title 30 CFR, and as having met the Flame Resistant Solid Products Taken Into Mines. 1. Type "OMEGA" specification 21372-624, Conveyor Belt. Approval No. 18CBA060012-0, issued to Goodyear Tire & Rubber Company, 13601 Industrial Parkway, Marysville, Ohio 43040, October 4, 2006. 2. Type "OMEGA" specification 21372-622, Conveyor Belt. Approval No. 18CBA060013-0, issued to Goodyear Tire & Rubber Company, 13601 Industrial Parkway, Marysville, Ohio 43040, October 4, 2006. 3. Type "OMEGA" specification 21372-623, Conveyor Belt. Approval No. 18CBA060014-0, issued to Goodyear Tire & Rubber Company, 13601 Industrial Parkway, Marysville, Ohio 43040, October 4, 2006. The following product was approved as having met Part 36, Title 30 CFR. 1. Model 2060/2066 Utility Tractor. Approval No. 36-CA060001-0, issued to Pettito Mine Equipment Repair, Inc., P.O. Box 758, Morgantown, West Virginia 26507, October 11, 2006. The following product was accepted as having met the Flame Resistant Solid Products Taken Into Mines. 1. Mine Grid 55, Rib/Roof Material. Acceptance No. IC-240/0, issued to Synteen Technical Fabrics, 1950 West Meeting Street, Lancaster, South Carolina 29720, October 5, 2006. Sincerely, John P . Faini John P. Faini Chief, Approval and Certification Center |
 Back to Top |
www.msha.gov | www.dol.gov |
|
| ||
|---|---|---|
|
| ||
|
Mine Safety and Health Administration (MSHA) 1100 Wilson Boulevard, 21st Floor Arlington, VA 22209-3939 |
Phone:
(202) 693-9400 Fax-on-demand: (202) 693-9401 Technical (web) questions: Webmaster On-line Filing Help: MSHAhelpdesk@dol.gov or call (877) 778-6055 Contact Us | |
