It is desirable, where practicable, to remove lead-containing components from commercial products forenvironmental considerations. One area where lead is extensively used is in lead-based solders. New lead-freesolders must have the appropriate melting temperatures and freezing ranges, in order to be compatible withexisting equipment and components. A thermodynamic database can be used to predict these properties and alsoshow the effects of non-equilibrium solidification. The results from these predictions can be used toeliminate candidate solder alloys for which the calculation revealed unsuitable freezing temperature andrange from further testing.

Different types of calculated systems must be distinguished:

• Assessed systems: A critical evaluation of available experimental data was used to derive atermodynamic description of the multicomponent system. If experimental data were only available or consideredfor part of the system then a partial assessment is possible.
• Extrapolated systems: The analytical descriptions of contistuent subsystems are combined and usedto predict the multicomponent system, even for compositions and temperatures which have not beenexperimentally evaluated. Depending on the complexity of the multicomponent system this prediction will bemore or less accurate.

This webpage contains a collection of calculated binary and ternary systems that are relevant to solders.The thermodynamic descriptions of these systems are compiled in database files which can be downloaded.Examples for the application of these systems can be found in our papers on solders.

Binary Systems

Ternary Systems

Thermodynamic Database (Sn - Ag - Bi - Cu - Pb)

Condensed Phases

^*Major species are printed bold face

Thermodynamic Database Files