Some
files on the STD*MIS site require Adobe Acrobat or Adobe
Reader.
Reports for
Version 3.4
Below are all the prewritten reports for use with STD*MIS
version 3.4. STD*MIS includes reports written in both Clipper and EpiInfo.
STD*MIS
reports
can
be installed directly onto a local or network drive using a single file
or they can be installed onto a local or network drive using multiple diskettes.
The hard drive installation is available as a single large file download
while the diskette installation is available via download of twelve smaller
files. Note that the single file for the hard drive installation
will not fit onto a single floppy diskette. If you need to perform the
installation of STD*MIS reports on multiple machines, you may want to use
the diskette-based installation to make distribution easier. If you have
any questions regarding these installation options, contact
your STD*MIS support person. Select from the following installation
options:
Follow the steps listed below to download all STD*MIS reports and install them from a local or network drive. It is recommended that you print these instructions before continuing.
Create a directory on your target drive named STDFILES.
Download 34REPT0.ZIP into the STDFILES directory on your target drive. The directory must NOT be the same directory that holds STD*MIS.
Decompress (unzip) 34REPT0.ZIP into STDFILES directory. One of the types of files created in this step is an additional set of compressed files (.ZIP). DO NOT decompress any zip file other than 34REPT0.ZIP. These files will be automatically decompressed during the report installation process.
Run STD*MIS and choose REPORTS - INSTALL NEW REPORTS.
In the Source Drive box enter the letter of your source drive.
In the Source Directory box enter STDFILES.
The system will complete the installation of reports and ask if you have any other reports to install. Choose "No" at this time.
Direct questions to the STD*MIS Support Team at 404-498-3400.
Follow the steps listed below to download all STD*MIS reports and install them from a floppy drive. It is recommended that you print these instructions before continuing.
Create a directory on your target drive named STDFILES.
Download all the disk files in the table below into the STDFILES directory.
Decompress each of the disk files onto separate floppy diskettes.
Run STD*MIS and choose REPORTS - INSTALL NEW REPORTS.
In the Source Drive box enter the floppy drive designation.
In the Source Directory box enter the name of the directory in which you placed these files. If there is no directory on the diskette, just enter a backslash (\) in place of a directory name.
The system will complete the installation of reports on the current diskette and ask if you have any other reports
to install. Select "Yes" until you have completed installing all reports.
Follow the steps listed below to download an individual STD*MIS report and install it from a local or network drive. It is recommended that you print these instructions before continuing.
Create a directory on your target drive named STDFILES.
Download the desired report from the table below into the STDFILES directory.
Download REPTMENU.DBF from the table below into the STDFILES directory.
Run STD*MIS and choose REPORTS - INSTALL NEW REPORTS.
In the Source Drive box enter the target drive.
In the Source Directory box enter STDFILES.
The system will complete the installation of the report and ask if you have any other reports to install. Select "Yes" until you have completed installing all desired reports.
This file must be downloaded and placed in the same directory as the individual report files that are to be installed. If you have added local reports to your Report Menu, DO NOT COPY this file directly into your STD*MIS directory. To assure your local report menu is not overwritten, you must use the Install new reports option in STD*MIS.
To install an update to STD*MIS reports, select the appropriate
file from the table below, download it into your STD*MIS folder, and unzip
it.
Note: the file 34REPTS.ZIP contains
the most up-to-date versions of all the STD*MIS reports, and the
file 34PGMS.ZIP contains the most up-to-date versions of all STD*MIS
EpiInfo morbidity reports.
Some
files on the STD*MIS site require Adobe Acrobat or 
