NIOSHTIC-2 No. 20030439


Field-Scale Void Detection in Coal Piles Using Resistivity Imaging

July 2002

Publication first page
Document cover page
Click the image to enlarge

To reduce fatalities resulting from personnel falling into voids formed above feeders in coal piles, the National Institute for Occupational Safety and Health at the Spokane Research Laboratory established a project to monitor coal surge piles to detect the formation of voids. A resistivity imaging method has been developed by GECOH Exploration, of Lexington, KY, in which a geophysical technique known as vertical electrical sounding (VES) is used to scan for these voids. VES operates by measuring the electrical field produced by a current in the ground at the bottom of the coal pile. This paper summarizes the results obtained from a field-scale test and shows that mapping voids within a coal pile is possible.

Author(s):Rodriguez-R, Rodriguez-H, Lhamond-M, Johnson-JC, Iverson-SR
Reference:NARMS-TAC 2002, "Mining and Tunnelling Innovation and Opportunity," Proceedings of the 5th American Rock Mechanics Symposium and the 17th Tunnelling Association of Canada Conference, July 7-10, 2002, Toronto, Ontario, Canada. Hammah R, Bawden W, Curran J, Telesnicki M, eds., Toronto, Ontario, Canada: University of Toronto Press, 2002 Jul; 1:415-419

   fsvdi (PDF, 822 KB)


A link above requires the Adobe Acrobat® Reader.
You can download a reader for free from Adobe through our Accessibility/Tools page.
Get Adobe Reader
Page last updated: September 17, 2008
Content Source: National Institute for Occupational Safety and Health (NIOSH) Mining Division