NIOSHTIC-2 No. 20026119


Damage Delineation in Structures Using Laser Vibrometry and Remote Excitation

2004

Publication first page
Document cover page
Click the image to enlarge

As part of a research program to reduce injuries and fatalities in the U.S. mining workforce, NIOSH is investigating the potential use of noncontact vibration measurements to identify hazardous ground fall conditions. In the present study, the effectiveness of remote vibration sources in exciting resonant responses in damaged structures is examined. Initial experiments were performed on a damaged concrete slab in a controlled environment. Vibration response was measured with a laser Doppler vibrometer using both single-point and two-dimensional array recordings. Excitation sources included direct mechanical impacts to remote portions of the slab and a remotely located industrial demolition hammer. Surficial damage was effectively delineated with both sources through visualization of vibration response in spectral bands selected to discriminate wave propagation from large-scale slab resonance effects.

Author(s):Swanson-PL, Rettkowski-J
Reference:Proc 2004 SEM X Intl Congress and Exposition on Experimental and Applied Mechanics (Costa Mesa, CA, June 7-10, 2004). Bethel, CT: Society for Experimental Mechanics, 2004 Jun; :1-7

   ddisu (PDF, 447 KB)


A link above requires the Adobe Acrobat® Reader.
You can download a reader for free from Adobe through our Accessibility/Tools page.
Get Adobe Reader
Page last updated: September 17, 2008
Content Source: National Institute for Occupational Safety and Health (NIOSH) Mining Division