Horizontal Time Dependent Positioning
TRANSFORMING VELOCITIES BETWEEN REFERENCE FRAMES
Specify the reference frame for the input values:
NAD_83(CORS96) North American tectonic plate fixed n
NAD 83(PACP00) Pacific tectonic plate fixed
NAD 83(MARP00) Mariana tectonic plate fixed
WGS_72
WGS_84(original) (NAD_83(CORS96) will be used)
WGS_84(G730) (ITRF92 will be used)
WGS_84(G873) (ITRF96 will be used)
WGS_84(G1150) (ITRF00 will be used)
PNEOS_90 (ITRF90 will be used)
NEOS_90 (ITRF90 will be used)
SIO/MIT_92 (ITRF91 will be used)
ITRF88
ITRF89
ITRF90
ITRF91
ITRF92
ITRF93
ITRF94 (ITRF96 will be used)
ITRF96
ITRF97
IGS97 (ITRF97 will be used)
ITRF00
IGS00 (ITRF00 will be used)
IGb00 (ITRF00 will be used)
ITRF2005
IGS05 (ITRF2005 will be used)
Specify the reference frame for the output values:
NAD_83(CORS96) North American tectonic plate fixed n
NAD 83(PACP00) Pacific tectonic plate fixed
NAD 83(MARP00) Mariana tectonic plate fixed
WGS_72
WGS_84(original) (NAD_83(CORS96) will be used)
WGS_84(G730) (ITRF92 will be used)
WGS_84(G873) (ITRF96 will be used)
WGS_84(G1150) (ITRF00 will be used)
PNEOS_90 (ITRF90 will be used)
NEOS_90 (ITRF90 will be used)
SIO/MIT_92 (ITRF91 will be used)
ITRF88
ITRF89
ITRF90
ITRF91
ITRF92
ITRF93
ITRF94 (ITRF96 will be used)
ITRF96
ITRF97
IGS97 (ITRF97 will be used)
ITRF00
IGS00 (ITRF00 will be used)
IGb00 (ITRF00 will be used)
ITRF2005
IGS05 (ITRF2005 will be used)
Input the site's position either in terms of latitude, longitude, and ellipsoidal height or in terms of geocentric Cartesian coordinates -X,Y,Z- but not both. For latitude (positive north) and longitude (positive west), use the form degrees, minutes, and seconds and use either commas or spaces to separate the individual values. The field for seconds must include a decimal point. To denote negative values, use negative degrees, minutes, and seconds.
Valid examples for latitude are:
37,34,35.67
37 34 35.67
-37 -34 -35.67
denotes a point in the southern hemisphere.
Values for ellipsoidal height or for X, Y, and Z must be specified in meters and must be entered with a decimal point (but without commas).
Select the type of coordinates to be entered:
Latitude, Longitude, Height
X, Y, Z
Latitude or X:
Longitude or Y:
Height or Z:
Station Name (optional):
Select how the required velocity is to be entered:
Specify the ve locity in terms of north-east-up components (use the input boxes below)
Specify the velocity in terms of global X-Y-Z components (use the input boxes below)
North or X (mm/yr):
East or Y (mm/yr):
Up or Z (mm/yr):