Position Overview
The Weapon Engineering Technology (WT) Division provides technical expertise to the Weapons System (W) Division, Applied Physics (X) Division, the Hydrodynamic Experiments (HX) Division, the Hydrodynamics Test Program, the Dynamic Plutonium Experiments (DPE) Program, and the Science and Engineering Campaigns in accomplishing the Laboratory's Nuclear Weapon's mission. Specifically, WT Division provides engineering and technological expertise and support to the Nuclear Weapons Program through: design and assembly of small and large scale integrated experiments and ancillary hardware; environmental testing and advanced diagnostics; HE processing and manufacturing; inventory, packaging, and transportation of classified parts and hazardous materials; design, analysis, and testing of blast-loaded structures including small and large scale blast-loaded containment and confinement vessels; Nevada Test Site Engineering and Operations; and Tritium Science and Engineering. The Weapons Testing Design Drafting Group (WT-8) has the primary responsibility of providing mechanical design, drafting, and fielding support to the Nuclear Weapons experimental programs portfolio which primarily includes the Hydrodynamic Testing and Dynamic Plutonium Experiments programs. The successful candidate for this position will provide design/drafting support for deployed mechanical design/drafting teams. The successful candidate must be able to exercise personal initiative in successfully completing assigned tasks, and will work under the direction of an engineer or senior-level designer/drafter. The successful candidate will produce sketches and layouts, generate 3-dimensional models, and shall produce high quality mechanical drawings. The candidate will also be expected to aid in preparing graphics for presentations or publications. Work in fabrication shops or outdoors at a Laboratory firing site will be occasionally required. The successful candidate will work in high performing teams with personnel from across the Laboratory with varied backgrounds and disciplines. Flexibility, responsiveness, and multi-tasking are key job requirements for this position. The successful candidate will perform work in adherence to Laboratory and program requirements.
Key Position Requirements
Required Skills:
Demonstrated professional drafting and design experience. Demonstrated experience independently performing a broad range of design and drafting tasks under minimal supervision. Demonstrated experience as a designer in a lead role. Demonstrated ability to multi-task for multiple customers while meeting requirements and deadlines. Demonstrated experience participating as a contributing member of successful multi-disciplinary team. Demonstrated experience providing creative, practical solutions to a wide variety of design problems. Demonstrated knowledge and experience with ASME Y14.5 M, Geometric Dimensioning and Tolerancing and ANSI/AWS A2.4-98 welding standards. Demonstrated knowledge and experience with a 3-Dimensional Computer Aided Design (CAD) system, preferably Pro Engineer. Ability to solve design problems using basic engineering calculations and handbooks. Ability to interact and communicate effectively with engineering, fabrication, assembly, and firing site personnel and customers. Must be capable of visiting and working at firing sites in Los Alamos and at the Nevada Test Site. Demonstrated commitment to safety, security, conduct of engineering, conduct of operations, quality assurance, and diversity in the workplace. This position requires "Q" access authorization. Candidate must have the ability to obtain a "Q" clearance which normally requires US citizenship.
Desired Skills:
Demonstrated supervisory/leadership skills. Strong focus on interpersonal skills. Knowledge and experience acting as a liaison with fabrication shops and assembly personnel. Knowledge of machine shop practices and material use/properties. Knowledge and experience with a second CAD system such as AutoCAD. Knowledge of Global Drawing Requirements Manual. Knowledge and skills in other related mechanical disciplines.
Summary
Uses computer-aided design (CAD) equipment to produce unique drawings/layouts of components, facilities and/or systems. Generates complete design packages for complex components, facilities and/or systems. Uses industry codes, standards, and works with customer to develop specifications to prepare work plans, drawings and layouts. Works with engineering team to ensure drawing quality. Develops non-routine CAD drawings and design models Applies engineering design principles to design and fabricate components and assemblies. Performs calculations in support of complex technical problems. Contributes to budget and schedule information. Applies fabrication, construction, operation, and maintenance requirements relevant to designated discipline. Works independently and as part of a team. May supervise aspects of work. Identifies process improvement activities.
Job Duties
-
Safety and security are primary responsibilities for all Laboratory employees. Maintains required safety and security training and assures compliance; makes safety and security an integral part of every task. Takes steps to stop work if unsafe conditions exist or security is compromised.
-
Adheres to engineering policies, programs, procedures and practices.
-
complete understanding and wide application of technical principles, theories and concepts in the field. General knowledge of other related disciplines.
-
Works with customer to define requirements for the design solution. Independently completes part design or modification.
-
Incorporate fixes for complex design issues.
-
Incorporates understanding of material use and shop practices into design.
-
Uses and applies technical standards, principles, theories, concepts and techniques in the completion of complex work assignments.
-
Uses high-level, three-dimensional parametric CAD systems to develop multi-discipline design documents. Demonstrate working knowledge of second CAD system. Develops specifications.
-
Coordinates design drawings with other disciplines.
-
Estimates design time and drawing packages.
-
Acts as a liaison trhough fabrication and assembly.
-
Receives project information and instruction from engineers and scientists; works with minimal supervision.
-
Creates complete drawing packages that require minimal checking.
-
Creates complex, large assemblies using parametric models and propoer mating conditions.
-
Applies existing components in a novel way or designs new components.
-
Applies sound knowledge of engineering materials and their suitability for component fabrication. Makes materials decisions of design packages.
-
Applies proficient knowledge of American Society of Mechanical Engineers (ASME) Y14.5 or Laboratory drafting manual, as appropriate to job duties.
-
Participates in design reviews and resolves design conflicts.
-
Provides interface for complex design issues.
-
Uses electronic document control and records management database systems in the development, implementation and control of baseline drawings.
-
Works with little or no direct supervision. General instructions are given for new assignments. Work is occasionally reviewed for soundness of judgment, overall adequacy and accuracy.
-
Provides technical solutions to a wide range of difficult problems. Solutions are imaginative, thorough, practicable, and consistent with organizational objectives. Some responsibility for end products.
-
Interprets inspection reports and understands the impacts of non-conformities.
-
Promotes a mutually respectful work environment that is free from discrimination and harassment.
Job Knowledge
-
Proficient knowledge of computer-aided drafting techniques, CAD modeling and design and high-level 3-D parametric CAD systems. Working knowledge of second CAD system.
-
Sound knowledge of complex mathematical formulas and computations.
-
Working knowledge of engineering work planning and control methods.
-
Sound knowledge of engineering principles and basic technical responsibilities within designated discipline.
-
Working knowledge of relevant Laboratory procedures, standards and guides.
-
Working knowledge of industry, regulatory, or Department of Energy/National Nuclear Security Administration (DOE/NNSA) complex codes, standards, and criteria pertinent to the particular engineering discipline.
Education
Direction
A. Supervision Received
B. Supervision Exercised
C. Contacts
This description is not intended to be a complete statement of every aspect of the position, but rather to act as a guide to the essential functions to be performed. Assigned functions of this job may vary, and other duties and responsibilities may be assigned or changed at the discretion of management.
Contact
For specific questions about the status of this job, call (505)664-6947
