SUBPART 211.2--USING AND
MAINTAINING REQUIREMENTS DOCUMENTS
(Revised February 12, 2007)
211.201 Identification and
availability of specifications.
211.204 Solicitation provisions
and contract clauses.
211.270 Reserved.
211.271 Elimination of use of
class I ozone-depleting substances.
211.272 Alternate preservation,
packaging, and packing.
211.273 Substitutions for
military or Federal specifications and standards.
211.273-1 Definition.
211.273-2 Policy.
211.273-3 Procedures.
211.273-4 Contract clause.
211.274 Item identification and valuation.
211.274-1 General.
211.274-2 Policy for unique item identification.
211.274-3 Policy for valuation.
211.274-4 Contract clause.
211.275 Radio frequency identification.
211.275-1 Definitions.
211.275-2 Policy.
211.275-3 Contract clause.
211.201 Identification and
availability of specifications.
Follow the procedures at PGI 211.201 (Pop-up Window or
PGI Viewer Mode) for use of specifications,
standards, and data item descriptions.
211.204 Solicitation provisions
and contract clauses.
(c) When
contract performance requires use of specifications, standards, and data item
descriptions that are not listed in the Acquisition Streamlining and
Standardization Information System database, use provisions, as appropriate,
substantially the same as those at—
(i)
252.211-7001, Availability of Specifications, Standards, and Data Item
Descriptions Not Listed in the Acquisition Streamlining and Standardization
Information System (ASSIST), and Plans, Drawings, and Other Pertinent
Documents; and
(ii) 252.211-7002, Availability for Examination of
Specifications, Standards, Plans, Drawings, Data Item Descriptions, and Other
Pertinent Documents.
211.270 Reserved.
211.271 Elimination of use of
class I ozone-depleting substances.
See Subpart 223.8 for
restrictions on contracting for ozone-depleting substances.
211.272 Alternate preservation,
packaging, and packing.
Use the provision at
252.211-7004, Alternate Preservation, Packaging, and Packing, in solicitations
which include military preservation, packaging, or packing specifications when
it is feasible to evaluate and award using commercial or industrial
preservation, packaging, or packing.
211.273 Substitutions for
military or Federal specifications and standards.
211.273-1 Definition.
“SPI process,” as used
in this section, is defined in the clause at 252.211-7005, Substitutions for
Military or Federal Specifications and Standards.
211.273-2 Policy.
(a) Under the Single
Process Initiative (SPI), DoD accepts SPI processes in lieu of specific
military or Federal specifications or standards that specify a management or
manufacturing process.
(b) DoD acceptance of an
SPI process follows the decision of a Management Council, which includes
representatives of the contractor, the Defense Contract Management Agency, the
Defense Contract Audit Agency, and the military departments.
(c) In procurements of
previously developed items, SPI processes that previously were accepted by the
Management Council shall be considered valid replacements for military or
Federal specifications or standards, absent a specific determination to the
contrary.
211.273-3 Procedures.
Follow the procedures at PGI 211.273-3 (Pop-up Window or PGI Viewer Mode) for encouraging the use
of SPI processes instead of military or Federal specifications and standards.
211.273-4 Contract clause.
Use the clause at
252.211-7005, Substitutions for Military or Federal Specifications and
Standards, in solicitations and contracts exceeding the micro-purchase threshold,
when procuring previously developed items.
211.274 Item identification and valuation.
211.274-1 General.
Unique
item identification and valuation is a system of marking and valuing items
delivered to DoD that will enhance logistics, contracting, and financial
business transactions supporting the
(a)
Achieve lower life-cycle cost of item management and improve life-cycle
property management;
(b)
Improve operational readiness;
(c)
Provide reliable accountability of property and asset visibility
throughout the life cycle; and
(d)
Reduce the burden on the workforce through increased productivity and
efficiency.
211.274-2 Policy for unique item identification.
(a) It is DoD policy that DoD
unique item identification, or a DoD recognized unique identification
equivalent, is required for—
(1) All delivered items for which the Government’s
unit acquisition cost is $5,000 or more;
(2) Items for which the Government’s unit
acquisition cost is less than $5,000, when identified by the requiring activity
as serially managed, mission essential, or controlled inventory;
(3) Items for which the Government’s unit
acquisition cost is less than $5,000, when the requiring activity determines
that permanent identification is required; and
(4) Regardless of value—
(i) Any DoD serially managed subassembly,
component, or part embedded within a delivered item; and
(ii) The parent item (as defined in
252.211-7003(a)) that contains the embedded subassembly, component, or part.
(b)
Exceptions. The Contractor will not be required to
provide DoD unique item identification if—
(1) The items, as determined by the head of the
agency, are to be used to support a contingency operation or to facilitate
defense against or recovery from nuclear, biological, chemical, or radiological
attack; or
(2) A determination and findings has been
executed concluding that it is more cost effective for the Government requiring
activity to assign, mark, and register the unique item identification after
delivery of an item acquired from a small business concern or a commercial item
acquired under FAR Part 12 or Part 8.
(i) The determination and findings shall be
executed by—
(A) The Component Acquisition Executive for an
acquisition category (ACAT) I program; or
(B) The head of the contracting activity for all
other programs.
(ii) The DoD Unique Item Identification Program
Office must receive a copy of the determination and findings required by
paragraph (b)(2)(i) of this subsection.
Send the copy to DPAP, SPEC ASST,
3060 Defense Pentagon, 3E1044,
211.274-3 Policy for valuation.
(a)
It is DoD policy that contractors shall be required to identify the
Government’s unit acquisition cost (as defined in 252.211-7003(a)) for all
items delivered, even if none of the criteria for placing a unique item
identification mark applies.
(b)
The Government’s unit acquisition cost is—
(1) For fixed-price type line, subline, or
exhibit line items, the unit price identified in the contract at the time of
delivery;
(2) For cost-type or undefinitized line, subline,
or exhibit line items, the contractor’s estimated fully burdened unit cost to
the Government at the time of delivery; and
(3) For items delivered under a
time-and-materials contract, the contractor’s estimated fully burdened unit
cost to the Government at the time of delivery.
(c)
The Government’s unit acquisition cost of subassemblies, components, and
parts embedded in delivered items need not be separately identified.
211.274-4 Contract clause.
Use the
clause at 252.211-7003, Item Identification and Valuation, in solicitations and
contracts that require item identification or valuation, or both, in accordance
with 211.274-2 and 211.274-3.
(a)
Complete paragraph (c)(1)(ii) of the clause with the contract line,
subline, or exhibit line item number and description of any item(s) below
$5,000 in unit acquisition cost for which DoD unique item identification or a
DoD recognized unique identification equivalent is required in accordance with
211.274-2(a)(2) or (3).
(b)
Complete paragraph (c)(1)(iii) of the clause with the applicable attachment
number, when DoD unique item identification or a DoD recognized unique
identification equivalent is required in accordance with 211.274-2(a)(4) for DoD
serially managed subassemblies, components, or parts embedded within
deliverable items.
(c)
Use the clause with its Alternate I if—
(1) An exception in 211.274-2(b) applies; or
(2) Items are to be delivered to the Government
and none of the criteria for placing a unique item identification mark applies.
211.275 Radio frequency identification.
211.275-1 Definitions.
“Bulk commodities,” “case,” “palletized unit load,” “passive
RFID tag,” and “radio frequency identification” are defined in the clause at
252.211-7006, Radio Frequency Identification.
211.275-2 Policy.
(a)
Except as provided in paragraph (b) of this subsection, radio frequency
identification (RFID), in the form of a passive RFID tag, is required for
individual cases and palletized unit loads that—
(1) Contain items in any of the following classes
of supply, as defined in DoD 4140.1-R, DoD Supply Chain Materiel Management
Regulation, AP1.1.11:
(i) Subclass of Class I – Packaged operational
rations.
(ii) Class II – Clothing, individual equipment,
tentage, organizational tool kits, hand tools, and administrative and
housekeeping supplies and equipment.
(iii) Class IIIP – Packaged petroleum, lubricants,
oils, preservatives, chemicals, and additives.
(iv) Class IV – Construction and barrier
materials.
(v) Class VI – Personal demand items
(non-military sales items).
(vi) Subclass of Class VIII – Medical materials
(excluding pharmaceuticals, biologicals, and reagents – suppliers should limit
the mixing of excluded and non-excluded materials).
(vii) Class IX – Repair parts and components
including kits, assemblies and subassemblies, reparable and consumable items
required for maintenance support of all equipment, excluding medical-peculiar repair
parts; and
(2) Will be shipped to one of the following
locations:
(i) Defense Distribution Depot, Susquehanna,
PA: DoDAAC W25G1U or SW3124.
(ii) Defense Distribution Depot,
(iii)
Defense Distribution Depot,
(iv)
Defense Distribution Depot,
(v)
Defense Distribution Depot,
(vi)
Defense Distribution Depot,
(vii)
Defense Distribution Depot,
(viii)
Defense Distribution Depot,
(ix)
Defense Distribution Depot, Hill, UT:
DoDAAC SW3210.
(x)
Defense Distribution Depot,
(xi)
Defense Distribution Depot,
(xii)
Defense Distribution Depot,
(xiii)
Defense Distribution Depot,
(xiv)
Defense Distribution Depot,
(xv)
Defense Distribution Depot,
(xvi)
Defense Distribution Depot,
(xvii)
Defense Distribution Depot,
(xviii)
Defense Distribution Depot,
(xix)
Air Mobility Command Terminal, Charleston Air Force Base,
(xx)
Air Mobility Command Terminal, Naval Air Station,
(xxi)
Air Mobility Command Terminal, Travis Air Force Base,
(xxii) A location outside the contiguous
(b) The following are excluded from the
requirements of paragraph (a) of this subsection:
(1) Shipments of bulk commodities.
(2) Shipments to locations other than Defense
Distribution Depots when the contract includes the clause at FAR 52.213-1, Fast
Payment Procedures.
211.275-3 Contract clause.
Use the clause at 252.211-7006, Radio Frequency Identification,
in solicitations and contracts that will require shipment of items meeting the
criteria at 211.275-2.