|
|
|
|
|
|
|
|
|
|
Brand Information
|
Zep Drain Aid |
liquid |
Home Maintenance » Drain » cleaner
|
800-241-5656 |
2008-01-02 |
2008-01-02 |
|
|
|
|
|
|
|
Manufacturer
|
Enforcer Products, Inc. |
Div., Acuity Brands, Inc. |
P.O. Box 1060 |
Cartersville |
GA |
30120 |
770-386-0801 |
770-386-1659 |
800-241-5656 |
2008-01-09 |
Products by this manufacturer |
|
|
|
|
The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS.
(Complete MSDS for this product)
|
|
|
|
Health Effects
|
|
From MSDS
HAZARDS IDENTIFICATION
Routes of Entry: Dermal contact. Eye contact. Inhalation.
Ingestion.
POTENTIAL HEALTH EFFECTS
Acute Effects
Eyes: Corrosive to eyes on contact. Eye exposure may cause severe and permanent eye injury (blindness).
Skin: Corrosive to skin on contact. Skin contact may produce burns. The amount of tissue damage depends on length of contact.
Inhalation: Corrosive to the respiratory system. Liquid or spray mist may produce tissue damage particularly on mucous membranes of eyes, mouth and respiratory tract.
Ingestion: May be fatal if swallowed. Can cause burns to mouth, throat and stomach.
|
From MSDS
Repeated or prolonged contact with spray mist may produce chronic eye irritation and severe skin irritation. May cause dermatitis. Repeated or prolonged exposure to spray mist may produce respiratory tract irritation leading to frequent attacks of bronchial infection. Repeated or prolonged exposure to the substance can produce lung damage.
|
From MSDS
Not listed as carcinogen by OSHA, NTP or IARC
|
From MSDS
Eye Contact: Flush with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical attention
Skin Contact: In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention immediately.
Inhalation: If inhaled, remove to fresh air. If irritation persists, get medical attention.
Ingestion: Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Have conscious person drink several glasses of water or milk. Get medical attention immediately.
|
3 |
0 |
1 |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe; N = No information provided by manufacturer; * = Chronic Health Hazard |
2008-01-02 |
2007-05-22 |
|
|
|
|
|
|
|
Handling/Disposal
|
From MSDS
Handling: Avoid contact with eyes, skin and clothing. Avoid breathing vapors or spray mists. Use only with adequate ventilation. Do not ingest. Wash thoroughly after handling. Wash contaminated clothing before reusing. Do not reuse product container. Ensure that eyewash stations and safety showers are proximal to the work-station location. When making solutions or diluting, add product slowly to surface of cold water. Do not add to warm or hot water as a violent eruption can result.
Storage: Keep container tightly closed and dry. Store between 40�F - 120�F (4.4�C - 49�C). Keep away from incompatibles. Keep out of the reach of children. Flammable hydrogen gas may be produced on prolonged contact with metals such as aluminum, tin, lead and zinc. Aluminum tanks or containers not acceptable.
|
From MSDS
Waste must be disposed of in accordance with federal, state and local environmental control regulations.
|
|
|
|
|
|
|
|
Ingredients from MSDS/Label
|
|
|
|
|
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
|
|