[Code of Federal Regulations]

[Title 46, Volume 4]

[Revised as of October 1, 2006]

From the U.S. Government Printing Office via GPO Access

[CITE: 46CFR111.33-3]



[Page 226]

 

                            TITLE 46_SHIPPING



                  (This book contains parts 90 to 139)

 

   CHAPTER I--COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED)

 

PART 111_ELECTRIC SYSTEMS_GENERAL REQUIREMENTS--Table of Contents

 

          Subpart 111.33_Power Semiconductor Rectifier Systems

 

Sec.  111.33-3  Nameplate data.



    (a) Each semiconductor rectifier system must have a nameplate of 

durable material affixed to the unit that meets the requirements of--

    (1) Section 45.11 of IEEE Std 45; or

    (2) IEC 92-304 (clause 8).

    (b) Each semiconductor rectifier system must have a nameplate 

containing the words ``marine semiconductor rectifier,'' and the 

following information:

    (1) Manufacturer's name and address.

    (2) Manufacturer's serial number.

    (3) Type.

    (4) Rated AC volts.

    (5) Rated AC amperes.

    (6) Number of phases.

    (7) Frequency.

    (8) Rated DC volts.

    (9) Rated DC amperes.

    (10) Ambient temperature range.

    (11) Duty cycle.

    (12) Cooling medium.

    (c) If, on small rectifiers, the information required by paragraph 

(a) of this section cannot be shown because of space limitations, the 

nameplate must be at least large enough to contain the manufacturer's 

name and serial number. The remaining information must be shown on the 

schematic diagram.



[CGD 74-125A, 47 FR 15236, Apr. 8, 1982, as amended by CGD 94-108, 61 FR 

28279, June 4, 1996]



[[Page 227]]