[Code of Federal Regulations]
[Title 49, Volume 4]
[Revised as of October 1, 2002]
From the U.S. Government Printing Office via GPO Access
[CITE: 49CFR230.46]

[Page 331]
 
                        TITLE 49--TRANSPORTATION
 
       CHAPTER II--FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF 
                             TRANSPORTATION
 
PART 230--STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS--Table of Contents
 
                  Subpart B--Boilers and Appurtenances
 
Sec. 230.46  Badge plates.

    A metal badge plate showing the allowed steam pressure shall be 
attached to the boiler backhead in the cab. If boiler backhead is 
lagged, the lagging and jacket shall be cut away so that the plate can 
be seen.