[Code of Federal Regulations] [Title 49, Volume 2] [Revised as of October 1, 2002] From the U.S. Government Printing Office via GPO Access [CITE: 49CFR173.228] [Page 545] TITLE 49--TRANSPORTATION CHAPTER I--RESEARCH AND SPECIAL PROGRAMS ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PART 173--SHIPPERS--GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS--Table of Contents Subpart E--Non-bulk Packaging for Hazardous Materials Other Than Class 1 and Class 7 Sec. 173.228 Bromine pentafluoride or bromine trifluoride. The following packagings are authorized for bromine pentafluoride and bromine trifluoride: (a) Specification 3A150, 3AA150, 3B240, 3BN150, 4B240, 4BA240, 4BW240 and 3E1800 cylinders. No cylinder may be equipped with a pressure relief device. (b) A material in Hazard Zone A must be transported in a seamless specification cylinder conforming to the requirements of Sec. 173.40. However, a welded cylinder filled before October 1, 2002, may be transported for reprocessing or disposal of the cylinder's contents until April 1, 2003. No cylinder may be equipped with a pressure relief device. [67 FR 51643, Aug. 8, 2002, as amended at 67 FR 61289, Sept. 30, 2002]