[Code of Federal Regulations]
[Title 22, Volume 1]
[Revised as of April 1, 2001]
From the U.S. Government Printing Office via GPO Access
[CITE: 22CFR92.34]

[Page 374]
 
                       TITLE 22--FOREIGN RELATIONS
 
                     CHAPTER I--DEPARTMENT OF STATE
 
PART 92--NOTARIAL AND RELATED SERVICES--Table of Contents
 
Sec. 92.34  Fastening certificate to instrument.

    The proper place for the certificate of acknowledgment is after the 
signature of the parties to the instrument. If the instrument is a 
printed form, the certificate will almost invariably be a part of the 
form. When Form FS-88 is used or when the certificate must be prepared 
on a sheet separate from the instrument, it should be fastened to the 
instrument as the last sheet. The method of fastening notarial 
certificates is prescribed in Sec. 92.17.