[Federal Register: February 24, 1999 (Volume 64, Number 36)] [Notices] [Page 9215-9216] From the Federal Register Online via GPO Access [wais.access.gpo.gov] [DOCID:fr24fe99-125] ----------------------------------------------------------------------- DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration [Docket No. NHTSA-99-5116; Notice 1] Johnston Sweeper Company; Application for Temporary Exemption From Federal Motor Vehicle Safety Standard No. 105 We are asking for public comment on the application by Johnston Sweeper Company of Chino, California (``JSC''), for an exemption until March 1, 2002, from requirements of Motor Vehicle Safety Standard No. 105, Hyraulic and Electric Brake Systems, that are effective March 1, 1999. JSC has applied on the basis that ``compliance would cause substantial economic hardship to a manufacturer that has tried in good faith to comply with the standard.'' 49 CFR 555.6(a). We are publishing this notice of receipt of the application in accordance with our regulations on temporary exemptions. This action does not represent any judgment by us about the merits of the application. The discussion that follows is based on information contained in JSC's application. Why JSC Needs a Temporary Exemption On and after March 1, 1999, S5.5 of Standard No. 105 requires any motor vehicle with a GVWR greater than 10,000 pounds, except for a vehicle that has a speed attainable in 2 miles of 30 mph or less, to be equipped with an antilock brake system (``ABS''), as specified in S5.5.1 of the standard. JSC manufactures street sweepers. One of these, the Model M4000, is a ``truck'' as defined by our regulations. The M4000 is hydrostatically driven, and has two braking systems: hydrostatic braking and hydraulically-braked front and rear axles. Both axles are specifically manufactured for JSC by proprietary axle manufacturers who produce customized versions of existing conventional vehicle axles, in order to make them economically viable. As far as JCS can ascertain, it is unique in producing a hydrostatically-driven vehicle that can achieve highway speeds of up to 60 mph. A supplier had promised axles by August 1998 that would be compatible with ABS control systems leading JSC to expect that it could conform with the new requirements of Standard No. 105 effective March 1, 1999. However, for the reasons discussed below, the supplier is unable to fulfill its commitment to JCS in a timely manner. [[Page 9216]] Why Compliance Would Cause JSC Substantial Economic Hardship JSC produced 303 sweepers in 1998. Its net losses over the past three fiscal years have averaged $1,690,815 annually. It estimates that ``the loss of sales by not being granted an exemption would result in 20% less turnover.'' JSC stated that it employs 170 persons and contributes more than $30,000,000 to the American economy, and, if its application is denied, this would have a measurable effect on its employment force and the company's economic contributions. JCS stated that it believes it will need 18 to 24 months to complete compliance work after receipt of prototype axles, in order to assure the reliability and endurance of its vehicles when the system is put into production. How JSC Has Tried To Comply With the Standard in Good Faith During 1997, JSC concluded a long search to find a manufacturer prepared to design and manufacture economically-viable front and rear axle and brake assemblies compatible with ABS control systems. Its supplier promised to provide axles by August 1998. According to JSC, ``the supplier subsequently acquired another axle manufacturer and instigated a rationalization review of the resulting combined product ranges.'' As a result, the supplier has decided not to produce the original axle design. JCS does not expect suitable prototypes to be available until mid to late 1999. The company has approached other axle manufacturers but has not yet located a better alternative. After it receives prototype axles, significant testing will be required to integrate the ABS with hydrostatic braking and to ensure the reliability and durability of the axles and braking system. Why Exempting JSC Would Be Consistent With the Public Interest and Objectives of Motor Vehicle Safety JCS said that it is a leading provider of road sweepers to municipalities, airports, and the like, which benefits the public by helping to reduce health hazards (``air borne, on the ground and in run-off water''). The company believes that the fact that its sweepers are reliable, durable, and cost effective is also in the public interest. The sweepers operate at average speeds of from 2 to 8 mph for approximately 80 to 90 percent of the time, ``well below the limit requiring ABS brakes.'' JSC stated that its sweepers ``have inherently safe braking (hydrostatic) since the retardation force applied is proportional to the tractive effort being applied, at the time.'' How To Comment on JSC's Application If you would like to comment on JSC's application, send two copies of your comments, in writing, to: Docket Management, National Highway Traffic Safety Administration, Room PL-401, 400 Seventh Street, SW, Washington, DC 20590, in care of the docket and notice number shown at the top of this document. We shall consider all comments received before the close of business on the comment closing date stated below. To the extent possible, we shall also consider comments filed after the closing date. You may examine the docket in Room PL-401, both before and after that date, between 10 a.m. and 5 p.m. When we have reached a decision, we shall publish it in the Federal Register. Comment closing date: March 16, 1999. Authority: 49 U.S.C. 30113; delegations of authority at 49 CFR 1.50 and 501.4. Issued on: February 18, 1999. L. Robert Shelton, Associate Administrator for Safety Performance Standards. [FR Doc. 99-4521 Filed 2-23-99; 8:45 am] BILLING CODE 4910-59-P