Manufacturers of ASME/ANSI A112.19.8-2007 Approved Drain Covers
The following companies, listed alphabetically, manufacture pool and spa drain covers of various sizes and have represented to CPSC staff that their covers meet the ASME/ANSI A112.19.8-2007 standard, as required by the Virginia Graeme Baker Pool and Spa Safety Act, Section 1404(c)(1)(A)(i).
The staff is providing this information as a convenience to pool owners and operators. The CPSC does not provide approval or endorsements for any of these companies or their products. Other companies not listed may also manufacture products that meet the requirements of the law.
Last updated 11/05/2008
- A&A Manufacturing
Division of Shasta Industries Inc.
3750 West Indian School Road
Phoenix, AZ 85019
Tel (800) 851-8492
Fax (602) 5324896
Michael Marshall
Michael.Marshall@aamfg.com
www.UnblockableDrain.com
- AquaStar Pool Products Inc.
1666 Garnet Ave #224
San Diego, CA 92109
Wade Arens
Tel (877) 768-2717 ext 2
Fax (877) 276-POOL
wade@aquastarpoolproducts.com
www.aquastarpoolproducts.com
- Commercial Pool & Spa Supplies Inc.
1167 East Hwy 36
Maplewood, MN 55109
Bill Soukup
Tel 877-842-4455
Fax 651-765-9924
billsoukup@commercialpool.com
www.commercialpoolseminars.com
- Current Systems Inc.
23679 Calabasas Rd.
Calabasas CA 91302
Tel (866) 372-8886
technical@current-sysytems.com
- Drain Safe/New Water Solutions
Ron Schroader
Lake Worth, FL
Tel (561) 433-2580
Ron@drainsafe.com
www.drainsafe.com
- Hayward Pool Products
61 White Cap Drive
North Kingstown, RI 02852
Joe DiOrio, Product Manager
Tel (401) 583-1107
Fax (401)583-1407
jdiorio@haywardnet.com
www.haywardnet.com/safety1
- Paddock Industries Inc.
555 Paddock Parkway
Rock Hill, SC 29730
Mike Schuett, Executive Vice President
Tel (800) 849-2729
www.paddockindustries.com
- Paramount Pool and Spa Systems
295 E. Corporate Place, Ste. 100
Chandler, AZ 85225
Dominic Conn, Director of Engineering
Tel (480) 893-7607
DCONN@1paramount.com
www.1paramount.com
- San Antonio Gary Equipment Company Inc.
438 Sandau Road
San Antonio, TX 78216-3621
Tassie Zars
Tel 210.341.5255
Fax 210.341.5154
www.GaryEquipment.com
retro@garypools.com
- Waterway Plastics
2200 E. Sturgis Rd.
Oxnard, CA. 93030
Ray Mirzaei, Certified Engineer
Tel (805) 981-0262
waterway@waterwayplastics.com
www.waterwayplastics.com
- World Wide Sports LLC
112 South Hanley Road
Suite 101
St. Louis, MO 63015-3418
Harry Newhart
Tel (314) 863-0040
www.worldwidesportsllc.com
Manufacturers of ASME/ANSI A112.19.17 or ASTM F2387 Approved Safety Vacuum Release Systems
The following companies, listed alphabetically, manufacture safety vacuum release systems and have represented to CPSC staff that their systems meet the ASME/ANSI A112.19.17 or ASTM F2387 standards, as required by the Virginia Graeme Baker Pool and Spa Safety Act, Section 1404(c)(1)(A)(I).
The staff is providing this information as a convenience to pool owners and operators. The CPSC does not provide approval or endorsements for any of these companies or their products. Other companies not listed may also manufacture products that meet the requirements of the law.
Last updated 10/14/2008
- A.O. Smith EPC
531 North Fourth Street
Tipp City, OH 45371
www.aosepc.com/Products/eMod/
[Note: eMod model also qualifies as an automatic pump shut off system.]
Midwest and Northeast
Greg Fritz
Tel (937) 609.6342
Florida / Southeast
John Alexander
Tel (813) 335.0879
West
Bill DeCorrevont
Tel (602) 300.4664
- Hayward Pool Products
61 White Cap Drive
North Kingstown, RI 02852
Joe DiOrio, Product Manager
Tel (401) 583-1107
Fax (401)583-1407
jdiorio@haywardnet.com
www.haywardnet.com/safety1
- Pentair Water Pool and Spa
1620 Hawkins Avenue
Sanford, NC 27330
Customer Service: 800-831-7133
Customer Service Fax: 919-566-8926
Technical Service: 800-831-7133
Steve Barnes
Steve.Barnes@PentairWater.com
www.PentairPool.com
- Stingl Products LLC
Sterling, VA
Tony Sirianni
Tel (888) 749.5433
Tel (571) 434-6010
Fax (571) 434.6013
tonysirianni@stinglproducts.com.
www.stinglproducts.com
- Vac-Alert Industries LLC
Santa Rosa, CA 95401
Paul Pennington
Tel (800) 374-7405
Fax (707) 576-8286
paul@vac-alert.com
www.vac-alert.com