Skip
repetitive navigational links
L-Soft  -  Home of  the  LISTSERV  mailing list  manager LISTSERV(R) 14.5
Skip repetitive navigational links
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (November 2005)Back to main ARSCLIST pageJoin or leave ARSCLISTReplyPost a new messageSearchProportional fontNon-proportional fontLog in
Date:         Fri, 11 Nov 2005 15:02:13 -0500
Reply-To:     Association for Recorded Sound Discussion List
              <[log in to unmask]>
Sender:       Association for Recorded Sound Discussion List
              <[log in to unmask]>
From:         Erik Dix <[log in to unmask]>
Subject:      Re: Digital Audio/Video
Comments: To: Association for Recorded Sound Discussion List <[log in to unmask]>
In-Reply-To:  <[log in to unmask]>
Content-Type: text/plain; charset="us-ascii"; format=flowed

Hi David! We use an elmo trv-16g projector for our transfers. It has a built-in ccd chip, but they are not made anymore and you would have to find one on ebay. Another option is a rca tp-66 projector and a camera made by Urbanski film in Illinois [http://www.urbanskifilm.com/], but I have no experience with the rca or urbanski's camera. Erik Notre Dame Archives At 02:38 PM 11/11/2005, you wrote: >Thanks to everyone for your information. I work with a Mac and Formac >Studio at home, and have found it to work well. I can see that having a >good processor and a HUGE hard drive will be the most important. > >This project is primarily focusing on preservation, having the final digital >video and audio online may be difficult. I know there are streaming servers, >etc., but the examples I have seen have 1-10 minute snippets. I may have to >put the transcripts online, and only provide a small sample. Has anyone >provided the capability for hour long video or audio collections online. > >And one more question.. Probably the most difficult. We have stacks of 16mm >newsreels. Is there anything out there for easy transfer to video/digital? >Maybe a "transfer box?" >Thanks so much everyone! >David Lynx >yakimamemory.org > > > > > I agree with Mike for video, particularly if it's just simple one- or > > two-tapes per DVD and you don't need to do sophisticated authoring > > (splitting into chapters, adding other multimedia, etc). Mike made a really > > key point, too -- spring for a unit with a hard drive. I have a JVC unit > > that doesn't have a hard drive and it's less than convenient for making > > anything except off-air recordings or straight dubs with no chapter splits > > of video tapes. That said, for those straight dubs, it's a client's best > > friend because the time is real-time plus 5 minutes setup and disc-closing > > per disc. There's a little bit more rig-a-marole with a hard drive unit but > > the authoring options are much more robust and you're not at the mercy of > > how compatible the media you happen to be using is (this JVC unit is > > somewhat picky about DVD-R media and it seems to take until nearly the end > > of a dub to decide it can't work with dics it doesn't like). To do really > > sophisticated (ie Hollywood-grade) authoring, I think your best bet is to > > spring for a decent-horsepower Mac and a decent-horsepower firewire video > > capture box and a full-fledged copy of Final Cut Pro. I do not know a more > > flexible or easier-to-use video-production program. I personally have a > > Windows setup and use Pinnacle Studio but it's a bit of a garbage program > > and if I get more video-authoring business to justify the cost, I will > > switch to Sony Vegas. > > > > -- Tom Fine > >-- >Yakima Valley Museum >yakimavalleymuseum.org >509-248-0747


Back to: Top of message | Previous page | Main ARSCLIST page

LISTSERV.LOC.GOV CataList email list search Powered by LISTSERV email list manager