Skip
repetitive navigational links
L-Soft  -  Home of  the  LISTSERV  mailing list  manager LISTSERV(R) 14.5
Skip repetitive navigational links
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (July 2007)Back to main ARSCLIST pageJoin or leave ARSCLISTReplyPost a new messageSearchProportional fontNon-proportional fontLog in
Date:         Fri, 6 Jul 2007 08:45:57 -0700
Reply-To:     Association for Recorded Sound Discussion List
              <[log in to unmask]>
Sender:       Association for Recorded Sound Discussion List
              <[log in to unmask]>
From:         Roger and Allison Kulp <[log in to unmask]>
Subject:      Re: LP pressing question
Comments: To: Association for Recorded Sound Discussion List <[log in to unmask]>
In-Reply-To:  <000301c7be61$f7776290$e66627b0$@com>
Content-Type: text/plain; charset=iso-8859-1

I have quite a lot of Motown Lps from 1964-72,that I knew were pressed by RCA. This is the very first confirmation of this I have found.You used all three plants didn't you? I have some marked with the Monarch "MR" too,but these begin about 1964.They used somebody else before, 1964,but don't want to get up and pull out my records. What was the deal with the RCA pressings for Atlantic in the 60s ? I always like to find them. Roger Bob Olhsson <[log in to unmask]> wrote: -----Original Message----- From Tom Fine: "how many cutters were there at Motown and what was your system?" We had a Neumann ES-59 half speed mono system and finally added a stereo system in 1968 when the superb Neumann SX-68 cutter came out. For the most part we were cutting master prototypes that Randy Kling at RCA in Chicago had to match using their Scully/Westrex systems for the production masters. We only cut production masters when there wasn't enough time to go the RCA route. Typically this happened when an artist got offered a last minute Ed Sullivan Show appearance. We preferred RCA production masters and plating because they could fix any skipping problems in a day rather than the week it would take using indi plating plants. In the pop music business timing and the ability to put your ducks in a row is frequently the difference between a hit record and a stiff. In the mid '60s RCA was pressing more Motown singles than RCA singles. And that didn't include the reorders which were done by three indi plants, Monarch in LA and two others which were half-owned by Motown! Bob Olhsson Audio Mastery, Nashville TN Mastering, Audio for Picture, Mix Evaluation and Quality Control Over 40 years making people sound better than they ever imagined! 615.385.8051 http://www.hyperback.com --------------------------------- Be a better Globetrotter. Get better travel answers from someone who knows. Yahoo! Answers - Check it out.


Back to: Top of message | Previous page | Main ARSCLIST page

LISTSERV.LOC.GOV CataList email list search Powered by LISTSERV email list manager