Date:Wed, 4 Jul 2007 00:44:45 -0400
Reply-To:Association for Recorded Sound Discussion List
<[log in to unmask]>
Sender:Association for Recorded Sound Discussion List
<[log in to unmask]>
From:David Lennick <[log in to unmask]>
Subject:Re: LP pressing question
Comments:To: Association for Recorded Sound Discussion List <[log in to unmask]>
In-Reply-To:<[log in to unmask]>
Content-Type:text/plain; charset=ISO-8859-1; format=flowed
By the way, I've had lengthy arguments over the inaccurate timings shown on
many CD tray cards. Too often, these include ramp time..which is useless if
you're playing a CD on the air and timing to the top of the hour. The CBC
Library would note timings on discs that didn't show them, and these were
always taken from a readout on the player..and thus were also incorrect if the
machine read the time to the beginning of the next track and not the end of the
current one.
And timings on record labels were more widespread than my previous comment.
Transcriptions had to show them in the early 30s, as did Mood Music discs.
David Lennick wrote:
> Steven C. Barr(x) wrote:
>> ----- Original Message ----- From: "Michael Shoshani"
>> <[log in to unmask]>
>>> Tom Fine wrote:
>>>> When the QC listening was done, it was done with a stop-watch so
>>>> that times could be known for problem, which were noted.
>>> That's interesting - I read somewhere that records did not carry time
>>> information until after tape was introduced, which led me to conclude
>>> that the time was calculated by measuring the tape footage and
>>> dividing it by the speed, rather than having some poor schlub sit
>>> there all day with a stopwatch.
>>>
>> I suspect that the real reason for time information appearing on record
>> labels was the fact that records were being used on radio "disc jockey"
>> programs to an increasing extent...and the "deejay" needs to know in
>> advance how long a disc will play in order to allow properly-timed
>> "station breaks" and even program duration. IIRC, the "promo copies"
>> usually provided this info before the emergence of tape mastering...
>>
>> Steven C. Barr
>> (Who has done...and still does...deejay-based radio programs, and who
>> finds it much easier now that CD players provide data like "time
>> remaining...")
>>
> Timings actually appeared on record labels as early as the 1920s, on
> World Constant Velocity discs. And they certainly appeared on some
> transcription discs (or on the cue sheets sent with same).
>
> dl (who still uses a stopwatch and who can still accurately add an
> entire sequence of timings with 100% accuracy)
>