Technical Progress Report 56


Demonstration of Safety Plugging of Oil Wells Penetrating Appalachian Coal Mines

1972

Publication first page
Document cover page
Click the image to enlarge

An oil well penetrating the Pittsburgh bituminous coalbed in northern West Virginia was plugged and safely mined through 3 months later. A sensitive chemical tracer, introduced into the oil reservoir before the test, was not detected in the mine air following the plugging and during mining of the pillar and penetration of the well. Effectiveness of the plugging in preventing reservoir gas from entering the mine through the well hole was verified by continuous monitoring of the mine air for indications of sulfur hexafluoride, an inert gas detectable in amounts as minute as 0.5 Part per billion. Expandable cement and fly ash-gel-water slurry were utilized to seal the well above and below the coal seam. Three other wells were also plugged using various techniques.

Author(s):Rennick-GE, Pasini-J, Armstrong-FE, Abrams-JR
Reference:U.S. Department of the Interior, Bureau of Mines. Technical Progress Report 56, NTIS No. PB-211350, 1986; :1-12

   tpr56 (PDF, 1473 KB) (image based PDF - searchable with Adobe Reader 7)


A link above requires the Adobe Acrobat® Reader.
You can download a reader for free from Adobe through our Accessibility/Tools page.
Get Adobe Reader
Page last updated: September 17, 2008
Content Source: National Institute for Occupational Safety and Health (NIOSH) Mining Division