The Small Emplacement Excavator (SEE) snowplow enables the SEE to perform additional duty plowing snow. The plow attaches to the same connection points used for the SEE front-end bucket, using the same two bolts and four quick-disconnect hydraulic lines. The plow has hydraulic angle control and a trip edge that folds back to allow the plow to ride over obstacles up to four inches high. The existing SEE bucket controls operate the plow.
The plow mounts fairly easily without any need for modification. The plow assembly weighs 215 pounds more than the unloaded bucket loader assembly. (This weight difference does not affect vehicle performance.) The hydraulic controls should be operated in float position and the trip edge may need to be periodically reset (by lifting the blade) when plowing on rough surfaces. If plowing cross-country terrain containing frozen tuft grass or similar obstructions, the plow should be kept three to four inches above the ground.
| 
Problem