Technology Services, National Voluntary Laboratory Accreditation Program, NIST Go to Technology Services Home Page Go to NIST Home Page Go to National Voluntary Laboratory Accreditation Program Home Page Go to Directory of Accredited Laboratories Go to Fields of Accreditation Go to Publications/Applications Go to Mutual Recognition Arrangements Go to Assessor Resources Contact National Voluntary Laboratory Accreditation Program

Shanghai Institute of Measurement and Testing Technology EMC Lab

NVLAP Lab Code: 200632-0


Address and Contact Information:

716 Yi Shan Road
Shanghai City,200233
CHINA
Contact: Mr. Gong Zeng
Phone: 86-21-6470-1390 2008
Fax: 86-21-54975253
E-Mail: gongz@simt.com.cn
Send E-Mail to Laboratory: Shanghai Inst of Measurement & Test Tech
URL: http:www.simt.com.cn

NVLAP Accreditation Information

Listed below is the scope of accreditation for this laboratory as of January 8, 2009. For additional information, contact NVLAP at (301) 975-4016.

Send E-Mail to NVLAP at: NVLAP@nist.gov


Electromagnetic Compatibility & Telecommunications

Accreditation Valid From: January 1, 2009 Through: December 31, 2009

  • Emissions Test Methods:

[12/11451b] ISO 11451-2 (2005)
Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Off-vehicle radiation sources

[12/11451d] ISO 11451-4 (2006)
Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4: Bulk current injection (BCI)

[12/55012] CISPR 12 (2001), EN 55012 (2002) & BS EN 55012 (2002)
Vehicles, boats and internal combustion engine driven devices - Radio disturbance characteristics

[12/7637-0] ISO 7637-0, 1st Edition (1990-08-15)
Road vehicles - Electrical disturbance by conduction and coupling - Part 0: Definitions and general

[12/7637-2] ISO 7637-2, First edition (1990)
Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Commercial vehicles with nominal 24 V supply voltage - Electrical transient conduction along supply lines only

[12/7637-3] ISO 7637-3, 1st Edition (1995-07-15)
Road vehicles - Electrical disturbance by conduction and coupling - Part 3: vehicles with nominal 12 V or 24 V supply voltage - Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines

[12/7637a] ISO 7637-1, 2nd Edition (2002-03-15)
Road vehicles - Electrical disturbances from conduction and coupling - Part 1: Definitions and general considerations

[12/7637b] ISO 7637-2, Second edition (2004)
Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only

[12/CIS11a] IEC/CISPR 11, edition 3.1 (1999-08) & EN 55011 (1998)
Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement

[12/CIS11b] IEC/CISPR 11(2003) & EN 55011(1998), A1(1999), A2(2002)
Industrial, scientific and medical (ISM) radio-frequency equipment - Radio disturbance characteristics - Limits and methods of measurement

[12/CIS14] CISPR 14-1 (March 30, 2000)
Limits and Methods of Measurement of Radio interference Characteristics of Household Electrical Appliances, Portable Tools and Similiar Electrical Apparatus - Part 1: Emissions

[12/CIS14a] EN 55014-1 (1993), A1 (1997), A2 (1999)

[12/CIS14b] AS/NZS 1044 (1995)

[12/CIS14c] CNS 13783-1
Electromagnetic Compatibility Requirements for household appliances, electric tools and similar apparatus - Part 1: Emissions

[12/CIS14y] IEC/CISPR 14-1, Edition 4.2 (2002-10)
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

[12/CIS15e] CISPR 15 (2002) & EN 55015, A1(1997), A2(1999)
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

[12/CIS22] IEC/CISPR 22 (1997) & EN 55022 (1998) + A1(2000)
Limits and methods of measurement of radio disturbance characteristics of information technology equipment

[12/CIS22a] IEC/CISPR 22 (1993) and EN 55022 (1994)
Limits and methods of measurement of radio disturbance characteristics of information technology equipment, Amendment 1 (1995) and Amendment 2 (1996)

[12/CIS22b] CNS 13438 (1997)
Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment

[12/CIS22c] IEC/CISPR 22, Fourth Edition (2003-04) & EN 55022 (1998)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement

[12/CIS25b] IEC/CISPR 25, 2nd ed. (2002-08)
Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices ? Limits and methods of measurement: Sections 6.2, 6.3, 6.4, & 6.5

[12/EM02a]
IEC 61000-3-2, Edition 2.1 (2001-10), EN 61000-3-2 (2000), and AS/NZS 2279.1 (2000): Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A)

[12/EM02d] IEC 61000-3-2, Edition 2.2 (2004-11)
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase)

[12/EM03] IEC 61000-3-3(1995); EN 61000-3-3(1995); AS/NZS 2279.3(1995)
EMC - Part 3: Limits - Section 3. Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current up to 16A

[12/EM03a] IEC 1000-3-3 (1994-12)

[12/EM03b] IEC 61000-3-3, Edition 1.1(2002-03) & EN 61000-3-3, A1(2001)
EMC - Part 3-3: Limits - Limitations of voltage changes, voltage flucuations and flicker, in public low-voltage supply-systems, for equipment with rated current <=16 A per phase and not subject to conditional connections

[12/F18] FCC OST/MP-5 (1986)
FCC Methods of Measurement of Radio Noise Emissions for ISM Equipment (cited in FCC Method 47 CFR Part 18 - Industrial, Scientific, and Medical Equipment)

[12/FCC15b] ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart B
Unintentional Radiators

[12/T51a] AS/NZS CISPR 22 (2004)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement

  • Immunity Test Methods:

[12/10605] ISO 10605, First Edition (2001-12-15)
Road vehicles ? Test methods for electrical disturbances from electrostatic discharge.

[12/11452a] ISO 11452-1 (2005)
Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology

[12/11452b] ISO 11452-2 (2004)
Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Absorber-lined shielded enclosure

[12/11452c] ISO 11452-3 (2001)
Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3: Transverse electromagnetic mode (TEM) cell

[12/11452d] ISO 11452-4 (2001)
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Bulk current injection (BCI)

[12/11452e] ISO 11452-5 (2002)
Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 5: Stripline

[12/61547] EN 61547 (October 1995) and IEC 61547 (1995) + Amd 1 (2000)
Equipment for general lighting purposes EMC immunity requirements

[12/CIS14j] IEC/CISPR 14-2 (2001) Ed. 4 and EN 55014-2
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard

[12/CIS24] IEC/CISPR 24 (1997) A2(2002) & EN 55024 (1998) A2(2003)
Information technology equipment - Immunity characteristics - Limits and methods of measurement

[12/I01] IEC 61000-4-2, Ed. 1.2 (2001); EN 61000-4-2
Electrostatic Discharge Immunity Test

[12/I02] IEC 61000-4-3, Ed. 2.0 (2002-03); EN 61000-4-3 (2002)
Radiated Radio-Frequency Electromagnetic Field Immunity Test

[12/I03c] IEC 61000-4-4, Ed. 2.0 (2004-07)
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test

[12/I04] IEC 61000-4-5, Ed. 1.1 (2001-04); EN 61000-4-5
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test

[12/I05] IEC 61000-4-6, Ed. 2.0 (2003-05); EN 61000-4-6
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

[12/I06] IEC 61000-4-8, Ed. 1.1 (2001); EN 61000-4-8
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test

[12/I07a] IEC 61000-4-11(1994),A1(2001) & EN 61000-4-11(1994),A1(2001)
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests

Return to NVLAP Program Listing


Return to top of page NVLAP Home | Accredited Laboratories | Fields of Accreditation | Publications/Applications |
Mutual Recognition Arrangements | Assessor Resources | Contact NVLAP
Return to top of page

For questions concerning the National Voluntary Laboratory Accreditation Program, contact us:

National Voluntary Laboratory Accreditation Program, Standards Services Division, NIST, 100 Bureau Drive, Stop 2140, Gaithersburg, MD 20899-2140
Phone: (301) 975-4016, Fax: (301) 926-2884, Email: NVLAP@nist.gov

Date created: July 26, 2002
Last Updated: January 8, 2009

Privacy Statement / Security Notice / Accessibility Statement | Disclaimer | FOIA