Technology Services, National Voluntary Laboratory Accreditation Program, NIST Go to Technology Services Home Page Go to NIST Home Page Go to National Voluntary Laboratory Accreditation Program Home Page Go to Directory of Accredited Laboratories Go to Fields of Accreditation Go to Publications/Applications Go to Mutual Recognition Arrangements Go to Assessor Resources Contact National Voluntary Laboratory Accreditation Program

Nemko USA, Inc.

NVLAP Lab Code: 100426-0


Address and Contact Information:

802 N. Kealy
Lewisville, TX 75057-3136
Contact: Mr. Scott Oates
Phone: 972-436-9600
Fax: 972-436-2667
E-Mail: scott.oates@nemko.com
Send E-Mail to Laboratory: Nemko USA, Inc.
URL: http://www.nemko.com

NVLAP Accreditation Information

Listed below is the scope of accreditation for this laboratory as of January 8, 2009. For additional information, contact NVLAP at (301) 975-4016.

Send E-Mail to NVLAP at: NVLAP@nist.gov


Electromagnetic Compatibility & Telecommunications

Accreditation Valid From: January 1, 2009 Through: December 31, 2009

  • Emissions Test Methods:

[12/610006c] EN 61000-6-3 (2001) and IEC 61000-6-3 (1996)
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments

[12/610006d] EN 61000-6-4 (2001) and IEC 61000-6-4 (1997)
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments

[12/61326e] IEC 61326-1, Edition 1.2 (2000-11)
Electrical equipment for measurement, control and laboratory use - EMC requirements

[12/C6317a] ANSI C63.17-1998
American National Standard for Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices

[12/CIS11]
IEC/CISPR 11 + A1 (1997), EN 55011 (1998), AS/NZS CISPR 11 (2002), and CNS 13803 (1997): Limits and Methods of Measurement of Electromagnetic Disturbance Characteristics of Industrial, Scientific, and Medical Radio-Frequency Equipment

[12/CIS13]
IEC/CISPR 13 (2001-04), EN 55013 (2001), AS/NZS CISPR 13 (2003), and CNS 13439 (2001): Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement

[12/CIS14c] CNS 13783-1
Electromagnetic Compatibility Requirements for household appliances, electric tools and similar apparatus - Part 1: Emissions

[12/CIS14e] EN 55014-1 (2001) and A1 (2001)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

[12/CIS14f] AS/NZS 1044 (2001) and A1 (2001)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

[12/CIS22] IEC/CISPR 22 (1997) & EN 55022 (1998) + A1(2000)
Limits and methods of measurement of radio disturbance characteristics of information technology equipment

[12/CIS22b] CNS 13438 (1997)
Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment

[12/EM02a]
IEC 61000-3-2, Edition 2.1 (2001-10), EN 61000-3-2 (2000), and AS/NZS 2279.1 (2000): Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A)

[12/EM03] IEC 61000-3-3(1995); EN 61000-3-3(1995); AS/NZS 2279.3(1995)
EMC - Part 3: Limits - Section 3. Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current up to 16A

[12/FCC15b] ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart B
Unintentional Radiators

[12/FCC15c] ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart C
Intentional Radiators

[12/FCC15d] ANSI C63.17(1998) and ANSI C63.4 (2003)
with FCC Method - 47 CFR Part 15, Subpart D: Unlicensed Personal Communications Service Devices

[12/FCC15e] ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart E
Unlicensed National Information Infrastructure Service Devices

[12/FCC15f] FCC Report and Order ET Docket 98-153 (FCC 02-48)
and procedures in IDB 20021108-001 with FCC Method 47 CFR Part 15, Subpart F: Ultra-Wideband Operation

[12/ICES003] ICES-003 Issue 4 (2004)
Implementation and Interpretation of the Interference-Causing Equipment Standard for Digital Apparatus. (Industry Canada)

[12/KN22] KN22 with RRL Notice No. 2005-82 (Sept. 29, 2005)
RRL Notice No. 2005-82: Technical Requirements for Electromagnetic Interference Annex 8 (KN-22), RRL Notice No. 2005-131: Conformity Assessment Procedures for Electromagnetic Interference

[12/T51] AS/NZS CISPR 22 (2002) and AS/NZS 3548 (1997)
Electromagnetic Interference - Limits and Methods of Measurement of Information Technology Equipment

[12/T51a] AS/NZS CISPR 22 (2004)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement

  • Immunity Test Methods:

[12/50121a] EN 50121-1 (2000) and prEN 50121-1 (1997)
Railway applications - Electromagnetic compatibility - Part 1: General

[12/501304] EN 50130-4 (1996)
Alarm systems - Part 4. Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder and social alarm systems

[12/55103d] BS EN 55103-2 (1997)
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2. Immunity

[12/610006a] EN 61000-6-1 (2001)
Electromagnetic compatibility (EMC) - Part 6 - 1: Generic standards - Immunity for residential, commercial and light-industrial environments

[12/610006b] EN 61000-6-2 (2001)
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments

[12/61326] EN 61326 (1998) and IEC 61326 (1997)
Electrical equipment for measurement, control and laboratory use - EMC requirements

[12/ENV01] DD ENV 50204 (1996)
Radiated electromagnetic field from digital radio telephones - Immunity test

[12/I01] IEC 61000-4-2, Ed. 1.2 (2001); EN 61000-4-2
Electrostatic Discharge Immunity Test

[12/I02a] IEC 61000-4-3, Ed. 2.1 (2002-09); EN 61000-4-3 (2002)
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

[12/I03a] IEC/EN 61000-4-4 (2001), A1 (2001)
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test

[12/I04] IEC 61000-4-5, Ed. 1.1 (2001-04); EN 61000-4-5
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test

[12/I05] IEC 61000-4-6, Ed. 2.0 (2003-05); EN 61000-4-6
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

[12/I06b] IEC 61000-4-8 (2001), A1(2000); EN 61000-4-8 (2001),A1(2000)
Power Frequency Magnetic Field Immunity Test

[12/I07] IEC 61000-4-11, Ed. 1.1 (2001-03); EN 61000-4-11
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests

[12/I08] IEC/CISPR 24 (1997), Amd1, A1(2001); EN 55024 (1998)
Information technology equipment - Immunity characteristics - Limits and methods of measurement

[12/KN11a] KN 61000-4-11 with RRL Notice No. 2005-130 (Dec 27, 2005)
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests

[12/KN2a] KN 61000-4-2 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Electrostatic Discharge Immunity Test

[12/KN3a] KN 61000-4-3 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Radiated, radio-frequency, electromagnetic field immunity test

[12/KN4a] KN 61000-4-4 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Electrical Fast Transient/Burst Immun

[12/KN5a] KN 61000-4-5 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Surge Immunity Test

[12/KN6a] KN 61000-4-6 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Immunity to conducted disturbances,

[12/KN8a] KN 61000-4-8 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Power Frequency Magnetic Field Immunity Test

  • Product Safety Test Methods

[12/4117] AS/NZS 4117 (1999)
Surge protective devices for telecommunications applications

[12/60601aa] IEC 60601-1-2, Ed 2.1 (2004-11) & EN 60601-1-2 (2002)
Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: Electromagnetic compatibility - Requirements and tests

[12/T50a] AS/NZ 60950 (2000)
Safety of information technology equipment

  • RF Exposure Test Methods (SAR & MPE)

[12/T41a] AS/NZS 60950 (2000)
Safety of Information Technology Equipment (including Amdt1)

[12/T50] AS/NZS 3260 (1993) + Supplement 1 (1996)
Safety of Information Technology Equipment Including Electrical Business Equipment

  • Radio Test Methods

[12/300086] ETSI EN 300 086-2 v1.1.1 (2001-03)
ERM; Land Mobile Service; Radio equipment with an internal or external RF connector intended primarily for analogue speech; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE

[12/300113] ETSI EN 300 113-2 v1.3.1 (2003-07)
Radio equipment intended for the transmission of data using constant or non-constant envelope modulation and having an antenna connector; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

[12/300220c] EN 300 220-3 V1.1.1 (2000-09)
ERM; Short Range Devices; Radio equipment to be used in the 25 MHz to 1,000 MHz frequency range with power levels ranging up to 500 mW; Part 3: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

[12/300328b] ETSI EN 300 328-2 v1.2.1 (2001-12)
Wideband Transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation techniques; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

[12/300330b] ETSI EN 300 330-2 v1.1.1 (2001-06)
ERM; Short Range Devices (SRD); Radio equipment in the frequency range 9kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

[12/300440b] ETSI EN 300 440-2 v1.1.1 (2001-09)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

[12/301126f] ETSI EN 301 126-2-5 v1.1.1 (2000-11)
Fixed Radio Systems; Conformance testing; Part 2-5: Point-to-Multipoint equipment; Test procedures for DS CDMA systems

[12/301213d] ETSI EN 301 213-4 v1.1.1 (2001-08): Fixed Radio Systems
Point-to-multipoint equipment; Point-to-multipoint digital radio systems in frequency bands in the range 24.25 GHz to 29.5 GHz using different access methods; Part 4: Direct Sequence Code Division Multiple Access (DS-CDMA) methods

[12/301489a] ETSI EN 301 489-1 v1.5.1 (2004-11)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements

[12/301489b] ETSI EN 301 489-3 v1.4.1 (2002-08)
Electromagnetic compatibility and Radio spectrum Matters; ElectroMagnetic Compatibility standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz

[12/301489c] ETSI EN 301 489-4 v1.3.1 (2002-08)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 4: Specific conditions for fixed radio links and ancillary equipment and services

[12/301489d] ETSI EN 301 489-5 v1.3.1 (2002-08)
Electromagnetic compatibility & Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 5: Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech)

[12/301489f] ETSI EN 301 489-7 v1.2.1 (2002-08)
ERM; EMC standard for radio equipment and services; Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS)

[12/301489g] ETSI EN 301 489-8 v1.2.1 (2002-08)
ElectroMagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 8: Specific conditions for GSM base stations

[12/301489j] ETSI EN 301 489-16 v1.2.1 (2002-08)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility standard for radio equipment and services; Part 16: Specific conditions for analogue cellular radio communications equipment, mobile and portable

[12/301489m] ETSI EN 301 489-17 v1.2.1 (2002-08)
Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment

[12/301489q] ETSI EN 301 489-23 v1.2.1 (2002-11)
Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 23: Specific conditions for IMT-2000 CDMA Direct Spread (Ultra) Base Station (BS) radio, repeater and ancillary equipment

[12/301489r] ETSI EN 301 489-24 v1.2.1 (2002-11)
Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 24: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and portable (UE) radio and ancillary equipment

[12/301489s] ETSI EN 301 489-25 v2.2.1 (2003-05)
Electromagnetic compatibillity and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 25: Specific conditions for IMT-2000 CDMA Multi-carrier Mobile Stations and ancillary equipment

[12/301489t] ETSI EN 301 489-26 v2.2.1 (2003-05)
Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 26: Specific conditions for IMT-2000 CDMA Multi-carrier Base Stations and ancillary equipment

[12/301502] EN 301 502 V8.1.2 (2001-07)
Harmonized EN for Global System for Mobile communications (GSM); Base Station and Repeater equipment covering essential requirements under article 13.21 of the R&TTE directive (GSM 13.21 version 8.1.2 Release 1999)

[12/301893] ETSI EN 301 893 V1.2.2 (2003-06)
Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

[12/RSS210] RSS-210, Issue 6 (Sept. 2005)
Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands): Category 1 Equipment

[12/RSS310] RSS-310, Issue 1 ( Sept. 2005)
Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands): Category II Equipment

[12/RSSgen] RSS-Gen, Issue 1 (Sept. 2005)
General Requirements and Information for the Certification of Radiocommunication Equipment

  • Telecommunications Test Methods:

[12/300386c] EN 300 386 V1.3.2 (2003-05)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements

[12/300386e] EN 300 386-2 V1.2.2 (2000-03)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunications network equipment; ElectroMagnetic Compatibility (EMC) requirements

[12/CS03a] Industry Canada CS-03, Issue 9, Amendment 1 (2005)
Compliance Specification for Terminal Equipment, Terminal Systems, Network Protection Devices, Connection Arrangements and Hearing Aids Compatibility

[12/DGT01] DGT RTTE01 (2003)
2.4GHz Radio-frequency Telecommunications Terminal Equipment Technical Specification

[12/DGT02] DGT ID 0002 (2000)
DS1 Equipment Type Approval Guidelines

[12/DGT03] DGT IS 6100 (2000)
ISDN CPE Type Approval Guidelines

[12/DGT04] DGT PSTN01 (2001)
Technical Specifications for Terminal Equipment for Connection to Public Switched Telephone Network

[12/FCC2a] TIA/EIA 603-C (2004) with 47 CFR Part 2
Personal Mobile Radio Services in 47 CFR Parts 22 (cellular), 24, 25, 26, and 27

[12/FCC2b] TIA/EIA 603-C (2004) with 47 CFR Part 2
General Mobile Radio Services in 47 CFR Parts 22 (non-cellular), 74, 90, 95, and 97

[12/FCC2c] TIA/EIA 603-C (2004) with 47 CFR Part 2
Maritime and Aviation Radio Services in 47 CFR Parts 80 and 87

[12/FCC2d] TIA/EIA 603-C (2004) with 47 CFR Part 2
Microwave Radio Services in 47 CFR Parts 27, 74, and 101

[12/ITUK21] ITU-T K.21 (10/2000) Series K
Protection Against Interference - Resistibility of telecommunication equipment installed in customer premises to overvoltages and overcurrents

[12/S031] AS/ACIF S031 (2001)
Requirements for ISDN Basic Access Interface

[12/S038] AS/ACIF S038 (2001)
Requirements for ISDN Primary Rate Access Interface

[12/T01]
Terminal Equipment Network Protection Standards, FCC/ACTA Method - 47 CFR Part 68 - Analog and Digital

[12/T01b]
68.316 and 68.317 Hearing Aid Compatibility: technical standards

[12/T01d]
68.318 Consumer protection requirements

[12/T42] AS/ACIF S002 (2001) + Amendment 1
Analogue Interworking and Non-Interference Requirements for Customer Equipment Connected to the Public Switched Telephone Network

[12/T43] AS/ACIF S003:2001
Customer Switching Systems Connected to the Public Switched Telephone Network

[12/T44] AS/ACIF S004 (2004)
Voice Frequency Performance Requirements for Customer Equipment

[12/T45] AS/ACIF S006 (2001)
Requirements for Customer Equipment, operating in the voiceband, for connection to the non-switched Telecommunications Network

[12/T49] AS/ACIF S016 (2001)
Requirements for Customer Equipment for connection to hierarchical digital interfaces

[12/TBR13] ETSI TBR 013 (January 1996)
Business TeleCommunications (BTC); 2,048 kbits/s digital structured leased lines (D2048S); Attachment requirements for terminal equipment interface

[12/TBR21] ETSI TBR 21 (January 1998)
Terminal Equipment; Attachment requirements for pan-European approval for connection to the analogue PSTNs of TE (excluding TE supporting the voice telephony service) in which network addressing, if provided, is by means of DTMF signalling

[12/TBR38] ETSI TBR 38 (May 1998)
Public Switched Telephone Network; Attachment requirements for a terminal equipment incorporating an analogue handset function capable of supporting the justified case service when connected to the analogue interface of the PSTN in Europe

[12/TIA968] ANSI/TIA-968-A (2003)
Telephone Terminal Equipment, Technical Requirements for Connection of Terminal Equipment to the Telephone Network

[12/TIA968a] ANSI/TIA-968-A-1 (2003)
Telephone Terminal Equipment, Technical Requirements for Connection of Terminal Equipment to the Telephone Network - Addendum 1

[12/TIA968b] ANSI/TIA-968-A-2 (2004)
Telephone Terminal Equipment, Technical Requirements for Connection of Terminal Equipment to the Telephone Network - Addendum 2

[12/TIA968c] ANSI/TIA-968-A-3 (2005)
Telephone Terminal Equipment, Technical Requirements for Connection of Terminal Equipment to the Telephone Network - Addendum 3

Return to NVLAP Program Listing


Return to top of page NVLAP Home | Accredited Laboratories | Fields of Accreditation | Publications/Applications |
Mutual Recognition Arrangements | Assessor Resources | Contact NVLAP
Return to top of page

For questions concerning the National Voluntary Laboratory Accreditation Program, contact us:

National Voluntary Laboratory Accreditation Program, Standards Services Division, NIST, 100 Bureau Drive, Stop 2140, Gaithersburg, MD 20899-2140
Phone: (301) 975-4016, Fax: (301) 926-2884, Email: NVLAP@nist.gov

Date created: July 26, 2002
Last Updated: January 8, 2009

Privacy Statement / Security Notice / Accessibility Statement | Disclaimer | FOIA