CSA International

NVLAP Lab Code: 100322-0

Address and Contact Information:

NVLAP Accreditation Information

Send E-Mail to NVLAP at: NVLAP@nist.gov

Commercial Products Testing

• Plumbing

[19/A01] ASME A112.18.2 (Sec. 2.3) (ASTM B117)
Corrosion Resistance

[19/A02] ASME A112.18.2 (Sec. 3.1.2)
Shower Drain Strainer Load Test

[19/A03] ASME A112.18.2 (Sec. 3.1.3)
Hot Oil Test for Plastic Kitchen Sink Strainers

[19/A04] ASME A112.18.2 (Sec. 4.3)
Strength Tests

[19/A05] ASME A112.18.2 (Sec. 4.4)
Life Cycle Test

[19/A06] ASME A112.18.2 (Sec. 4.5)
Leakage Test

[19/A07] ASME A112.18.2 (Sec. 4.6)
Thermal Cycling Test

[19/F15] ASME A112.18.1 (Sec. 2.2)
Coatings

[19/F16] ASME A112.18.1 (Sec. 2.14)(ASSE 1016)
Temperature and Pressure Compensating Shower Mixing Valves

[19/F17] ASME A112.18.1 (Sec. 3.2)
Strength Test

[19/F18] ASME A112.18.1 (Sec. 3.3)
Handle Security Test

[19/F19] ASME A112.18.1 (Sec. 3.4)
Valve Operating Test

[19/F20] ASME A112.18.1 (Sec. 3.5)
Flow Capacity Test Procedure

[19/F21] ASME A112.18.1 (Sec. 3.6)
Life Test

[19/F22] ASME A112.18.1 (Sec. 3.7)
High Temperature Extreme Test

[19/F23] ASME A112.18.1 (Sec. 3.8)
Intermittent Shock Test

[19/F24] ASME A112.18.1 (Sec 4.4.2)
Shower Heads

[19/F25] ASME A112.18.1 (Sec. 2.13)
Backflow Prevention Devices

[19/M01] ICC/ANSI A117.1 (Sec. 609, 610)
Buildings and Facilities Providing Accessibility and Usability for Physically Handicapped People

[19/M02] ASME/ANSI A112.19.7M (Sec. 5, 7)
Whirlpool Bathtub Appliances

[19/M03] ASME/ANSI A112.19.8M (Sec. 4, 5)
Suction Fittings for Use in Swimming Pools, Wading Pools, Spas, Hot Tubs, and Whirlpool Bathtub Appliances

[19/M04] ASTM F446
Standard Consumer Safety Specification for Grab Bars and Accessories Installed in Bathing Area

[19/P01] ANSI Z124.1 (Sec. 4, 5, 6)
Plastic Bathtub Units (Structural Integrity, Physical Characteristics and Material Tests)

[19/P02] ANSI Z124.2 (Sec. 4, 5, 6)
Plastic Shower Receptors-Stalls (Structural Integrity, Physical Characteristics and Materials Tests)

[19/P03] ANSI Z124.3 (Sec. 4, 5, 6)
Plastic Lavatories (Structural Integrity, Physical Characteristics and Materials Tests)

[19/P03a] ANSI/ICPA-SS-1 (Sec. 4, 5, 6)
Performance Standard for Solid Surface Materials (Structural Integrity, Physical Characteristics and Materials Tests)

[19/P04] ANSI Z124.4 (Sec. 4, 5)
Plastic Water Closet Bowls and Tanks (Structural Integrity and Physical Characteristics)

[19/P05] ANSI Z124.4 (Sec. 2.11) per ASME A112.19.6M (Sec. 7.1)
Plastic Water Closet Bowls and Tanks (Sanitary and Hydraulic Performance of Water Closet Tanks and Bowls)

[19/P06] ANSI/IAPMO Z124.6 (Sec. 4, 5, 6)
Plastic Sinks

[19/P07] ANSI/IAPMO Z124.8 (Sec. 4, 5)
Plastic Bathtub Liners

[19/U01a] ASME A112.18.3 (Sec. 11.1)
Check Valves (New and After Durability Tests)

[19/U01b] ASME A112.18.3 (Sec. 11.2)
Vacuum Breakers, Automatic Diverters, and Vents

[19/U01c] ASME A112.18.3 (Sec. 12)
Functional Test of Backflow Prevention Systems

[19/U01d] ASME A112.18.3 (Sec. 14)
Leakage of Protection Systems With Atmospheric Vents

[19/U01e] ASME A112.18.3 (Sec. 15)
Durability Tests

[19/U01f] ASME A112.18.3 (Sec. 16)
Verification of Critical Level (Hose Connected Movable Outlet Faucets with Atmospheric Vents)

[19/U02] ASSE 1001
Pipe Applied Atmospheric Type Vacuum Breakers

[19/U03] ASSE 1002
Anti-siphon Fill Valves (Ballcocks) for Gravity Water Closet Flush Tanks

[19/U04] ASSE 1003
Water Pressure Reducing Valves

[19/U05] ASSE 1011
Hose Connection Vacuum Breakers

[19/U06] ASSE 1012
Backflow Preventer with Intermediate Atmospheric Vent

[19/U07] ASSE 1014
Hand-Held Showers

[19/U08] ASSE 1016
Individual Thermostatic, Pressure Balancing, and Combination Pressure Balancing and Thermostatic Control Valves for Individual Fixture Fittings

[19/U09] ASSE 1017
Temperature Actuated Mixing Valves for Hot Water Distribution Systems

[19/U10] ASSE 1019
Vacuum Breaker Wall Hydrants, Freeze Resistant, Automatic Draining Type

[19/U11] ASSE 1021
Drain Air Gaps for Domestic Dishwasher Applications

[19/U12] ASSE 1025
Diverters for Plumbing Faucets with Hose Spray, Anti-Siphon Type, Residential Applications

[19/U13] ASSE 1035
Laboratory Faucet Backflow Preventers

[19/U14] ASSE 1037
Pressurized Flushing Devices (Flushometers) for Plumbing Fixtures

[19/U15] ASSE 1066
Individual Pressure Balancing In-Line Valves for Individual Fixture Fittings

[19/V07] ASME A112.19.2 (Sec. 7.1)
Vitreous China Plumbing Fixtures (Absorption - Boiling)

[19/V08] ASME A112.19.2 (Sec. 7.2)
Vitreous China Plumbing Fixtures (Crazing)

[19/V09] ASME A112.19.2 (Sec. 7.3)
Vitreous China Plumbing Fixtures (Warpage)

[19/V10] ASME A112.19.2 (Sec. 7.7)
Vitreous China Plumbing Fixtures (Load Tests - Wall Mounted Fixture Products)

[19/V11] ASME A112.19.2 (Sec. 7.6)
Vitreous China Plumbing Fixtures (Insulated Tanks)

[19/V12] ASME A112.19.2 (Sec. 7.5)
Vitreous China Plumbing Fixtures (Auger Test)

[19/W01] ASME A112.19.6 (Sec. 7.1.2)
Laboratory Tests for Waste Removal and Water Consumption (Test Apparatus and General Instructions)

[19/W02] ASME A112.19.6 (Sec. 7.1.3)
Laboratory Tests for Waste Removal and Water Consumption (Removal of Solids)

[19/W03] ASME A112.19.6 (Sec. 7.1.4)
Laboratory Tests for Waste Removal and Water Consumption (Washing of Flushing Surface-Rim Wash)

[19/W04] ASME A112.19.6 (Sec. 7.1.5)
Laboratory Tests for Waste Removal and Water Consumption (Removal of Waste Liquids-Water Change/Dye Test)

[19/W05] ASME A112.19.6 (Sec. 7.1.6)
Laboratory Tests for Waste Removal and Water Consumption (Water Consumption and Hydraulic Characteristics)

[19/W06] ASME A112.19.6 (Sec. 7.1.7)
Laboratory Tests for Waste Removal and Water Consumption (Drainline Transport Characterization Procedure)

[19/W07] ASME A112.19.6 (Sec. 7.1.8)
Laboratory Tests for Waste Removal and Water Consumption (Water Rise)

[19/W08] ASME A112.19.6 (Sec. 7.1.9)
Laboratory Tests for Waste Removal and Water Consumption (Rim Top and Seat Fouling)

[19/W15] ASME A112.19.2 (Sec. 8.3)
Trap Seal Restoration

[19/W16] ASME A112.19.2 (Sec. 8.4)
Water Consumption

[19/W17] ASME A112.19.2 (Sec. 8.5)
Granule and Ball Test

[19/W18] ASME A112.19.2 (Sec. 8.6)
Surface Wash Test

[19/W19] ASME A112.19.2 (Sec. 8.7)
Mixed Media with Neutrally Buoyant Wastes

[19/W20] ASME A112.19.2 (Sec. 8.8)
Drainline Transport Characterization Procedure

[19/W21] ASME A112.19.2 (Sec. 10.3)
Trap Seal Depth Determination

[19/W22] ASME A112.19.2 (Sec. 10.4)
Urinals Ink Test

[19/W23] ASME A112.19.2 (Sec. 10.5)
Urinals Dye Test

[19/W24] ASME A112.19.2 (Sec. 10.6)
Urinals Water Consumption

Electromagnetic Compatibility & Telecommunications

• Emissions Test Methods:

[12/CIS22] IEC/CISPR 22 (1997) & EN 55022 (1998) + A1(2000)
Limits and methods of measurement of radio disturbance characteristics of information technology equipment

[12/CIS22a] IEC/CISPR 22 (1993) and EN 55022 (1994)
Limits and methods of measurement of radio disturbance characteristics of information technology equipment, Amendment 1 (1995) and Amendment 2 (1996)

[12/CIS22b] CNS 13438 (1997)
Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment

[12/FCC15b] ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart B
Unintentional Radiators

[12/KN22] KN22 with RRL Notice No. 2005-82 (Sept. 29, 2005)
RRL Notice No. 2005-82: Technical Requirements for Electromagnetic Interference Annex 8 (KN-22), RRL Notice No. 2005-131: Conformity Assessment Procedures for Electromagnetic Interference

[12/T51a] AS/NZS CISPR 22 (2004)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement

• Immunity Test Methods:

[12/I01] IEC 61000-4-2, Ed. 1.2 (2001) + A1, A2; EN 61000-4-2
Electrostatic Discharge Immunity Test

[12/I02] IEC 61000-4-3, Ed. 2.0 (2002-03); EN 61000-4-3 (2002)
Radiated Radio-Frequency Electromagnetic Field Immunity Test

[12/I03] IEC 61000-4-4(1995), A1(2000), A2(2001); EN 61000-4-4
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test

[12/I04] IEC 61000-4-5, Ed. 1.1 (2001-04); EN 61000-4-5
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test

[12/I05] IEC 61000-4-6, Ed. 2.0 (2003-05); EN 61000-4-6
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

[12/I06] IEC 61000-4-8, Ed. 1.1 (2001); EN 61000-4-8
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test

[12/I07] IEC 61000-4-11, Ed. 1.1 (2001-03); EN 61000-4-11
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests

[12/KN11] KN 61000-4-11 with RRL Notice No. 2005-83 (Sept. 29, 2005)
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests

[12/KN2] KN 61000-4-2 with RRL Notice No. 2005-83 (Sept. 29, 2005)
Electrostatic Discharge Immunity Test

[12/KN3] KN 61000-4-3 with RRL Notice No. 2005-83 (Sept. 29, 2005)
Radiated, radio-frequency, electromagnetic field immunity test

[12/KN4] KN 61000-4-4 with RRL Notice No. 2005-83 (Sept. 29, 2005)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test

[12/KN5] KN 61000-4-5 with RRL Notice No. 2005-83 (Sept. 29, 2005)
Surge Immunity Test

[12/KN6] KN 61000-4-6 with RRL Notice No. 2005-83 (Sept. 29, 2005)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

[12/KN8] KN 61000-4-8 with RRL Notice No. 2005-83 (Sept. 29, 2005)
Power Frequency Magnetic Field Immunity Test

• Product Safety Test Methods

[12/4117] AS/NZS 4117 (1999)
Surge protective devices for telecommunications applications

[12/T50] AS/NZS 3260 (1993) + Supplement 1 (1996)
Safety of Information Technology Equipment Including Electrical Business Equipment

[12/T50a] AS/NZ 60950 (2000)
Safety of information technology equipment

[12/T50b] AS/NZS 60950.1 (2003)
Information technology equipment - Safety - Part 1: General requirements (IEC 60950-1: 2001, MOD)

Return to NVLAP Program Listing

NVLAP Home | Accredited Laboratories | Fields of Accreditation | Publications/Applications |
Mutual Recognition Arrangements | Assessor Resources | Contact NVLAP

For questions concerning the National Voluntary Laboratory Accreditation Program, contact us:

National Voluntary Laboratory Accreditation Program, Standards Services Division, NIST, 100 Bureau Drive, Stop 2140, Gaithersburg, MD 20899-2140
Phone: (301) 975-4016, Fax: (301) 926-2884, Email: NVLAP@nist.gov

Date created: July 26, 2002
Last Updated: January 8, 2009

Privacy Statement / Security Notice / Accessibility Statement | Disclaimer | FOIA