SUBPART 225.8--OTHER INTERNATIONAL
AGREEMENTS AND COORDINATION
(Revised May 31, 2007)
225.802 Procedures.
225.802-70 Contracts for performance outside the United States and
Canada.
225.802-71 End use certificates.
225.870 Contracting with
Canadian contractors.
225.870-1 General.
225.870-2 Solicitation of
Canadian contractors.
225.870-3 Submission of offers.
225.870-4 Contracting
procedures.
225.870-5 Contract
administration.
225.870-6 Termination
procedures.
225.870-7 Acceptance of Canadian
supplies.
225.870-8 Industrial security.
225.871 North Atlantic Treaty Organization (NATO) cooperative
projects.
225.871-1 Scope.
225.871-2 Definitions.
225.871-3 General.
225.871-4 Statutory waivers.
225.871-5 Directed
subcontracting.
225.871-6 Disposal of property.
225.871-7 Congressional
notification.
225.872 Contracting with
qualifying country sources.
225.872-1 General.
225.872-2 Applicability.
225.872-3 Solicitation
procedures.
225.872-4 Individual
determinations.
225.872-5 Contract administration.
225.872-6 Audit.
225.872-7 Industrial security
for qualifying countries.
225.872-8 Subcontracting with
qualifying country sources.
225.873-Waiver of United Kingdom commercial exploitation levies.
225.873-1 Policy.
225.873-2 Procedures.
225.802 Procedures.
(b) Information on memoranda of understanding and other international agreements is available at PGI 225.802(b) (Pop-up Window or PGI Viewer Mode) .
225.802-70 Contracts for performance outside the
Follow the procedures at PGI 225.802-70
(Pop-up Window or
PGI Viewer Mode)
when placing a contract requiring performance outside the
225.802-71 End use certificates.
Contracting officers considering the purchase of an item from a foreign source may encounter a request for the signing of a certificate to indicate that the Armed Forces of the United States is the end user of the item, and that the U.S. Government will not transfer the item to third parties without authorization from the Government of the country selling the item. When encountering this situation, refer to DoD Directive 2040.3, End Use Certificates, for guidance.
225.870 Contracting with
Canadian contractors.
(a) The Canadian Government guarantees to the U.S. Government all commitments, obligations, and covenants of the Canadian Commercial Corporation under any contract or order issued to the Corporation by any contracting office of the U.S. Government. The Canadian Government has waived notice of any change or modification that may be made, from time to time, in these commitments, obligations, or covenants.
(b) For production
planning purposes,
(c) The Canadian
Commercial Corporation will award and administer contracts with contractors
located in
(1) Negotiated acquisitions for experimental, developmental, or research work under projects other than the Defense Development Sharing Program;
(2) Acquisitions of unusual or compelling urgency;
(3) Acquisitions at or below the simplified acquisition threshold; or
(4) Acquisitions
made by DoD activities located in
(d) For additional information on production rights, data, and information; services provided by Canadian Commercial Corporation; audit; and inspection, see PGI 225.870-1(d) (Pop-up Window or PGI Viewer Mode) .
225.870-2 Solicitation of
Canadian contractors.
(a) If requested, furnish a solicitation to the Canadian Commercial Corporation even if no Canadian firm is solicited.
(b) Handle acquisitions at or below the simplified acquisition threshold directly with Canadian firms and not through the Canadian Commercial Corporation.
225.870-3 Submission of offers.
(a) As indicated in 225.870-4, the Canadian Commercial Corporation is the prime contractor. To indicate acceptance of offers by individual Canadian companies, the Canadian Commercial Corporation issues a letter supporting the Canadian offer and containing the following information:
(1) Name of the Canadian offeror.
(2) Confirmation and endorsement of the offer in the name of the Canadian Commercial Corporation.
(3) A statement that the Corporation shall subcontract 100 percent with the offeror.
(b) When a Canadian offer cannot be processed through the Canadian Commercial Corporation in time to meet the date for receipt of offers, the Corporation may permit Canadian firms to submit offers directly. However, the contracting officer shall receive the Canadian Commercial Corporation's endorsement before contract award.
(c) The Canadian
Commercial Corporation will submit all sealed bids in terms of
(d) Except for sealed
bids, the Canadian Commercial Corporation normally will submit offers and
quotations in terms of Canadian currency.
The Corporation may, at the time of submitting an offer, elect to quote
and receive payment in terms of
(1) Shall provide
for payment in
(2) Shall not be adjusted for losses or gains from fluctuation in exchange rates.
225.870-4 Contracting
procedures.
(a) Except for contracts described in 225.870-1(c)(1) through (4), award individual contracts covering purchases from suppliers located in Canada to the Canadian Commercial Corporation, 11th Floor, 50 O'Connor Street, Ottawa, Ontario, Canada, K1A-0S6.
(b) Direct communication with the Canadian supplier is authorized and encouraged in connection with all technical aspects of the contract, provided the Corporation's approval is obtained on any matters involving changes to the contract.
(c) Identify in the
contract, the type of currency, i.e.,
(1) Quote the contract price in terms of Canadian dollars and identify the amount by the initials “CN”, e.g., $1,647.23CN; and
(2) Clearly indicate on the face of the contract the U.S./Canadian conversion rate at the time of award and the U.S. dollar equivalent of the Canadian dollar contract amount.
225.870-5 Contract
administration.
Follow the contract administration procedures at PGI 225.870-5 (Pop-up Window or PGI Viewer Mode) .
225.870-6 Termination
procedures.
When contract termination is necessary, follow the procedures at 249.7000.
225.870-7 Acceptance of Canadian
supplies.
For information on the acceptance of Canadian supplies, see PGI 225.870-7 (Pop-up Window or PGI Viewer Mode) .
225.870-8 Industrial security.
Industrial security for
225.871 North Atlantic Treaty Organization (NATO) cooperative
projects.
This section implements 22 U.S.C. 2767 and 10 U.S.C. 2350b.
As used in this section--
(a) “Cooperative project” means a jointly managed arrangement—
(1) Described in a written agreement between the parties;
(2) Undertaken to further the objectives of standardization, rationalization, and interoperability of the armed forces of NATO member countries; and
(3) Providing for—
(i) One or more of the other participants to share with the United States the cost of research and development, testing, evaluation, or joint production (including follow-on support) of certain defense articles;
(ii)
Concurrent production in the
(iii)
Acquisition by the
(b) “Other participant”
means a cooperative project participant other than the
(a) Cooperative project authority.
(1) Departments and agencies, that have authority to do so, may enter into cooperative project agreements with NATO or with one or more member countries of NATO under DoDD 5530.3, International Agreements.
(2) Under laws and regulations governing the negotiation and implementation of cooperative project agreements, departments and agencies may enter into contracts, or incur other obligations, on behalf of other participants without charge to any appropriation or contract authorization.
(3) Agency heads are authorized to solicit and award contracts to implement cooperative projects.
(b) Contracts implementing cooperative projects shall comply with all applicable laws relating to Government acquisition, unless a waiver is granted under 225.871-4. A waiver of certain laws and regulations may be obtained if the waiver—
(1) Is required by the terms of a written cooperative project agreement;
(2) Will significantly further NATO standardization, rationalization, and interoperability; and
(3) Is approved by the appropriate DoD official.
(a) For contracts or
subcontracts placed outside the
(1) Procedures for the formation of contracts;
(2) Terms and conditions for inclusion in contracts;
(3) Requirements or preferences for—
(i) Goods
grown, produced, or manufactured in the
(ii) Services
to be performed in the
(4) Requirements regulating the performance of contracts.
(b) There is no authority for waiver of—
(1) Any provision of the Arms Export Control Act (22 U.S.C. 2751);
(2) Any provision of 10 U.S.C. 2304;
(3) The cargo
preference laws of the
(4) Any of the financial management responsibilities administered by the Secretary of the Treasury.
(c) To request a waiver under a cooperative project, follow the procedures at PGI 225.871-4 (Pop-up Window or PGI Viewer Mode) .
(d) Obtain the approval of the Deputy Secretary of Defense before committing to make a waiver in an agreement or a contract.
225.871-5 Directed
subcontracting.
(a) The Director of Defense Procurement and Acquisition Policy may authorize the direct placement of subcontracts with particular subcontractors. Directed subcontracting is not authorized unless specifically addressed in the cooperative project agreement.
(b) In some instances, it may not be feasible to name specific subcontractors at the time the agreement is concluded. However, the agreement shall clearly state the general provisions for work sharing at the prime and subcontract level. For additional information on cooperative project agreements, see PGI 225.871-5 (Pop-up Window or PGI Viewer Mode) .
225.871-6 Disposal of property.
Dispose of property that is
jointly acquired by the members of a cooperative project under the procedures
established in the agreement or in a manner consistent with the terms of the
agreement, without regard to any laws of the
225.871-7 Congressional
notification.
(a) Congressional notification is required when DoD makes a determination to award a contract or subcontract to a particular entity, if the determination was not part of the certification made under 22 U.S.C. 2767(f) before finalizing the cooperative agreement.
(1) Departments and agencies shall provide a proposed Congressional notice to the Director of Defense Procurement and Acquisition Policy in sufficient time to forward to Congress before the time of contract award.
(2) The proposed notice shall include the reason it is necessary to use the authority to designate a particular contractor or subcontractor.
(b) Congressional notification is also required each time a statutory waiver under 225.871-4 is incorporated in a contract or a contract modification, if such information was not provided in the certification to Congress before finalizing the cooperative agreement.
225.872 Contracting with
qualifying country sources.
(a) As a result of memoranda of understanding and other international agreements, DoD has determined it inconsistent with the public interest to apply restrictions of the Buy American Act or the Balance of Payments Program to the acquisition of qualifying country end products from the following qualifying countries:
|
United Kingdom of Great Britain and Northern Ireland |
(b) Individual acquisitions of qualifying country end products from the following qualifying countries may, on a purchase-by-purchase basis (see 225.872-4), be exempted from application of the Buy American Act and the Balance of Payments Program as inconsistent with the public interest:
|
|
(c) The determination in paragraph (a) of this subsection does not limit the authority of the Secretary concerned to restrict acquisitions to domestic sources or reject an otherwise acceptable offer from a qualifying country source when considered necessary for national defense reasons.
(a) This section applies to all acquisitions of supplies except those restricted by—
(1)
(2)
(i) Review individual solicitations to determine whether this restriction applies.
(ii) Information concerning restricted items may be obtained from the Deputy Under Secretary of Defense (Industrial Affairs);
(3) Other
(4)
(b) This section does not apply to construction contracts.
225.872-3 Solicitation
procedures.
(a) Except for items developed under the U.S./Canadian Development Sharing Program, use the criteria for soliciting and awarding contracts to small business concerns under FAR Part 19 without regard to whether there are potential qualifying country sources for the end product. Do not consider an offer of a qualifying country end product if the solicitation is identified for the exclusive participation of small business concerns.
(b) Send solicitations directly to qualifying country sources. Solicit Canadian sources through the Canadian Commercial Corporation in accordance with 225.870.
(c) Use international
air mail if solicitation destinations are outside the
(d) If unusual technical or security requirements preclude the acquisition of otherwise acceptable defense equipment from qualifying country sources, review the need for such requirements. Do not impose unusual technical or security requirements solely for the purpose of precluding the acquisition of defense equipment from qualifying countries.
(e) Do not automatically exclude qualifying country sources from submitting offers because their supplies have not been tested and evaluated by the department or agency.
(1) Consider the adequacy of qualifying country service testing on a case-by-case basis. Departments or agencies that must limit solicitations to sources whose items have been tested and evaluated by the department or agency shall consider supplies from qualifying country sources that have been tested and accepted by the qualifying country for service use.
(2) The department or agency may perform a confirmatory test, if necessary.
(3) Apply
(4) If it appears that these provisions might adversely delay service programs, obtain the concurrence of the Under Secretary of Defense (Acquisition, Technology, and Logistics), before excluding the qualifying country source from consideration.
(f) Permit industry
representatives from a qualifying country to attend symposia, program
briefings, prebid conferences (see FAR 14.207 and 15.201(c)), and similar
meetings that address
225.872-4 Individual
determinations.
If the offer of an end product from a qualifying country source listed in 225.872-1(b), as evaluated, is low or otherwise eligible for award, prepare a determination and findings exempting the acquisition from the Buy American Act and the Balance of Payments Program as inconsistent with the public interest, unless another exception such as the Trade Agreements Act applies. Follow the procedures at PGI 225.872-4 (Pop-up Window or PGI Viewer Mode) .
225.872-5 Contract administration.
(a) Arrangements exist with some qualifying countries to provide reciprocal contract administration services. Some arrangements are at no cost to either government. To determine whether such an arrangement has been negotiated and what contract administration functions are covered, contact the Deputy Director of Defense Procurement and Acquisition Policy (Contract Policy and International Contracting), ((703) 697-9351, DSN 227-9351).
(b) Follow the contract administration procedures at PGI 225.872-5(b) (Pop-up Window or PGI Viewer Mode) .
(c) Information on quality assurance delegations to foreign governments is in Subpart 246.4, Government Contract Quality Assurance.
(a) Memoranda of understanding with some qualifying countries contain annexes that provide for reciprocal “no-cost” audits of contracts and subcontracts (pre- and post-award).
(b) To determine if such an annex is applicable to a particular qualifying country, contact the Deputy Director of Defense Procurement and Acquisition Policy (Contract Policy and International Contracting), ((703) 697-9351, DSN 227-9351).
(c) Handle requests for audits in qualifying countries in accordance with 215.404-2(c), but follow the additional procedures at PGI 225.872-6(c) (Pop-up Window or PGI Viewer Mode) .
225.872-7 Industrial security
for qualifying countries.
The required procedures for safeguarding classified defense information necessary for the performance of contracts awarded to qualifying country sources are in the DoD Industrial Security Regulation DoD 5220.22-R (implemented for the Army by AR 380-49; for the Navy by SECNAV Instruction 5510.1H; for the Air Force by AFI 31-601; for the Defense Information Systems Agency by DCA Instruction 240-110-8; and for the National Imagery and Mapping Agency by NIMA Instruction 5220.22).
225.872-8 Subcontracting with
qualifying country sources.
In reviewing contractor
subcontracting procedures, the contracting officer shall ensure that the
contract does not preclude qualifying country sources from competing for
subcontracts, except when restricted by national security interest reasons,
mobilization base considerations, or applicable
225.873 Waiver of
DoD and the Government of the
United Kingdom (U.K.) have agreed to waive
When an offeror or a contractor identifies a levy included in an offered or contract price, follow the procedures at PGI 225.873-2 (Pop-up Window or PGI Viewer Mode) .