![](https://webarchive.library.unt.edu/eot2008/20090116025512im_/http://www.cfsan.fda.gov/lineblue.gif)
U. S. Food and Drug Administration
Center for Food Safety and Applied Nutrition
![](https://webarchive.library.unt.edu/eot2008/20090116025512im_/http://www.cfsan.fda.gov/lineblue.gif)
The Guide at a Glance
The Guide to Minimize Microbial Food Safety Hazards
for Fresh Fruits and Vegetables In Brief
This Guide provides general, broad-based voluntary guidance that may be applied, as appropriate, to individual operations
|
The Guide
- Is intended to assist domestic and foreign growers, packers, and shippers of unprocessed or minimally processed (raw) fresh fruits and vegetables by increasing awareness of potential hazards and providing suggestions for practices to minimize these hazards
- Covers agricultural and postharvest water uses, manure and biosolids, worker health and hygiene, field and facility sanitation, transportation, and traceback
- Does not impose any new requirements or supercede existing laws or regulations
- Will be most effective when used to evaluate individual operations and to institute good agricultural and good manufacturing practices (GAPs and GMPs) appropriate to the individual operations
Basic Principles include
- Prevention of microbial contamination of fresh produce is favored over reliance on corrective actions once contamination has occurred
- Accountability at all levels of the agricultural and packing environments is important to a successful food safety program
Water
Wherever water comes into contact with fresh produce, its quality dictates the potential for pathogen contamination
|
Agricultural Water
- Identify source and distribution of water used
- Be aware of current and historical use of land
- Review existing practices and conditions to identify potential sources of contamination. Consider practices that will protect water quality
- Maintain wells in good working condition
- Consider practices to minimize contact of the edible portion of fresh produce with contaminated irrigation water. Where water quality is good, risk is low regardless of irrigation method
Processing Water
- Follow GMPs to ensure water quality is adequate at the start of and throughout all processes
- Maintain water quality, such as by periodic testing for microbial contamination, changing water regularly, and cleaning and sanitizing water contact surfaces
- Antimicrobial chemicals may help minimize the potential for microbial contamination to be spread by processing water; levels of antimicrobial chemicals should be routinely monitored and recorded to ensure they are maintained at appropriate levels
- As organic material and microbial load increase, the effectiveness of many antimicrobial chemicals will decrease. Filtering recirculating water or scooping organic material from tanks may help reduce the build-up of organic materials
Cooling Operations
- Maintain temperatures that promote optimum produce quality and minimize pathogen growth
- Keep air cooling and chilling equipment clean and sanitary
- Keep water and ice clean and sanitary
- Manufacture, transport, and store ice under sanitary conditions
Manure and Municipal Biosolids
Properly treated manure or biosolids can be an effective and safe fertilizer.
|
- If manure is used as a fertilizer, it should be managed to minimize microbial hazards
- Federal regulations address the requirements for use of biosolids in the U.S.. Some states also have specific requirements for the use of biosolids. Foreign growers should follow these or similar requirements
Manure
- Use treatments to reduce pathogens in manure and other organic materials. Treatments may be active (e.g., composting) or passive (e.g., aging)
- Manure treatment and storage sites close to fresh produce fields increase the risk of contamination
- Consider factors such as slope and rainfall and the likelihood of runoff into fresh produce production areas
- Use barriers or physical containment to secure storage and treatment sites
- Protect treated manure from being re-contaminated
- When purchasing treated manure, get information about the method of treatment
- Maximize the time between application of manure to production areas and harvest
- Use of raw manure on produce during the growing season is not recommended
Animal Feces
While not possible to exclude all animal life from fresh produce production areas, many field programs include elements to protect crops from animal damage.
|
- Domestic animals should be excluded from fields and orchards during the growing and harvesting season
- Follow GAPs to ensure animal waste from adjacent fields, pastures, or waste storage facilities does not contaminate fresh produce production areas. Where necessary, consider physical barriers such as ditches, mounds, grass/sod waterways, diversion berms, and vegetative buffer areas
- Control of wild animal populations may be difficult or restricted by animal protection requirements. However, to the extent feasible, where high concentrations of wildlife are a concern, consider practices to deter or redirect wildlife to areas where crops are not destined for fresh produce markets
Worker Health and Hygiene
Infected employees who work with fresh produce increase the risk of transmitting foodborne illness.
|
- Train employees to follow good hygienic practices
- Establish a training program directed towards health and hygiene – include basics such as proper handwashing techniques and the importance of using toilet facilities
- Become familiar with typical signs and symptoms of infectious diseases
- Offer protection to workers with cuts or lesions on parts of the body that may make contact with fresh produce
- If employees wear gloves, be sure the gloves are used properly and do not become a vehicle for spreading pathogens
- Customer-pick and road-side produce operations should promote good hygienic practices with customers – encourage handwashing, provide toilets that are well equipped, clean, and sanitary and encourage washing fresh produce before consumption
Sanitary Facilities
- Poor management of human and other wastes in the field or packing facility increases the risk of contaminating fresh produce
- Be familiar with laws and regulations that apply to field and facility sanitation practices
- Toilet facilities should be accessible to workers, properly located, and well supplied
- Keep toilets, handwashing stations, and water containers clean and sanitary
- Use caution when servicing portable toilets to prevent leakage into a field
- Have a plan for containment in the event of waste spillage
Field Sanitation
Fresh produce may become contaminated during pre-harvest and harvest activities from contact with soil, fertilizers, water, workers, and harvesting equipment.
|
- Clean harvest storage facilities and containers or bins prior to use
- Take care not to contaminate fresh produce that is washed, cooled, or packaged
- Use harvesting and packing equipment appropriately and keep as clean as practicable
- Assign responsibility for equipment to the person in charge
Packing Facility
Maintain packing facilities in good condition to reduce the potential for microbial contamination.
|
- Remove as much dirt as practicable outside of packing facility
- Clean pallets, containers, or bins before use; discard damaged containers
- Keep packing equipment, packing areas, and storage areas clean
- Store empty containers in a way that protects them from contamination
Pest Control
- Establish and maintain a pest control program
- Block access of pests into enclosed facilities
- Maintain a pest control log
Transportation
Proper transport of fresh produce will help reduce the potential for microbial contamination.
|
- Good hygienic and sanitation practices should be used when loading, unloading, and inspecting fresh produce
- Inspect transportation vehicles for cleanliness, odors, obvious dirt and debris before loading
- Maintain proper transport temperatures
- Load produce to minimize physical damage
Traceback
The ability to identify the source of a product can serve as an important complement to good agricultural and management practices.
|
- Develop procedures to track produce containers from the farm, to the packer, distributor, and retailer
- Documentation should indicate the source of the product and other information, such as date of harvest, farm identification, and who handled the produce
- Growers, packers and shippers should partner with transporters, distributors and retailers to develop technologies to facilitate the traceback process
Once good agricultural and management practices are in place, ensure that the process is working correctly. Without accountability, the best efforts to minimize microbial contamination are subject to failure.
|
Copies of the Guide to Minimize Microbial Food Safety Hazards for Fresh Fruits and Vegetables, October 1998, are available from:
Food Safety Initiative Staff (HFS-32)*
U.S. Food and Drug Administration
Center for Food safety and Applied Nutrition
200 C Street SW
Washington, DC 20204
Or on the Internet at:
http://vm.cfsan.fda.gov/~dms/prodguid.html
The Guide to Minimize Microbial Food Safety Hazards for Fresh Fruits and Vegetables
(English)
(Arabic)
(Español)
(Français)
(Português)
* New address as of December 14, 2001:
Food Safety and Security Staff (HFS-32), Center for Food Safety and Applied Nutrition (CFSAN),
U.S. Food and Drug Administration, 5100 Paint Branch Parkway, College Park, Maryland 20740.
Food Safety Initiative
Foods Home
|
FDA Home
|
HHS Home
|
Search/Subject Index
|
Disclaimers & Privacy Policy
|
Accessibility/Help
Hypertext updated by dms/las 2003-AUG-19