Transport Layer Security

From Wikipedia, the free encyclopedia

This article needs additional citations for verification. Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (December 2007)

Transport Layer Security (TLS) Protocol and its predecessor, Secure Sockets Layer (SSL), are cryptographic protocols that provide security and data integrity for communications over TCP/IP networks such as the Internet. Several versions of the protocols are in wide-spread use in applications like web browsing, electronic mail, Internet faxing, instant messaging and voice-over-IP (VoIP). TLS and SSL encrypt the segments of the Transport Layer protocols in use for an end-to-end connection across the network. TLS is an IETF standards track protocol, last updated in RFC 5246, that was based on the earlier SSL specifications developed by Netscape Corporation.^[1]

The TCP/IP model (RFC 1122)
Application Layer
BGP · DHCP · DNS · FTP · Gopher · GTP · HTTP · IMAP · IRC · NNTP · NTP · POP · RIP · RPC · RTCP · RTP · RTSP · SDP · SIP · SMTP · SNMP · SOAP · SSH · STUN · Telnet · TIME · TLS/SSL · XMPP · (more)
Transport Layer
TCP · UDP · DCCP · SCTP · RSVP · ECN · (more)
Internet Layer
IP (IPv4, IPv6) · ICMP · ICMPv6 · IGMP · IPsec · (more)
Link Layer
ARP · RARP · NDP · OSPF · Tunnels (L2TP)  · Media Access Control (Ethernet, DSL, ISDN, FDDI)  · Device Drivers · (more)
This box: view • talk • edit

Contents 1 Description 2 History and development 3 Applications 4 Security 5 How it works 5.1 TLS handshake in detail 5.1.1 Simple TLS handshake 5.1.2 Client-authenticated TLS handshake 5.1.3 Resumed TLS handshake 5.2 TLS record protocol 5.3 ChangeCipherSpec protocol 5.4 Alert protocol 5.5 Handshake protocol 5.6 Application protocol 6 Support for name-based virtual servers 7 Government-imposed protocol limitations 8 Implementations 9 Standards 10 See also 10.1 Software 11 References and footnotes 12 Further reading 13 External links

[edit] Description

The TLS protocol allows applications to communicate across a network in a way designed to prevent eavesdropping, tampering, and message forgery. TLS provides endpoint authentication and communications confidentiality over the Internet using cryptography. Typically, only the server is authenticated (i.e., its identity is ensured) while the client remains unauthenticated; this means that the end user (whether an individual or an application, such as a Web browser) can be sure with whom it is communicating. The next level of security — in which both ends of the "conversation" are sure with whom they are communicating — is known as mutual authentication. Mutual authentication requires public key infrastructure (PKI) deployment to clients unless TLS-PSK or the Secure Remote Password (SRP) protocol are used, which provide strong mutual authentication without needing to deploy a PKI.

TLS involves three basic phases:

1. Peer negotiation for algorithm support
2. Key exchange and authentication
3. Symmetric cipher encryption and message authentication

During the first phase, the client and server negotiate cipher suites, which determine the ciphers to be used, the key exchange and authentication algorithms, as well as the message authentication codes (MACs). The key exchange and authentication algorithms are typically public key algorithms, or as in TLS-PSK preshared keys could be used. The message authentication codes are made up from cryptographic hash functions using the HMAC construction for TLS, and a non-standard pseudorandom function for SSL.

Typical algorithms are:

• For key exchange: RSA, Diffie-Hellman, ECDH, SRP, PSK
• For authentication: RSA, DSA, ECDSA
• Symmetric ciphers: RC4, Triple DES, AES, IDEA, DES, or Camellia. In older versions of SSL, RC2 was also used.
• For cryptographic hash function: HMAC-MD5 or HMAC-SHA are used for TLS, MD5 and SHA for SSL, while older versions of SSL also used MD2 and MD4.

[edit] History and development

Early research efforts toward transport layer security included the Secure Network Programming (SNP) API, which in 1993 explored the approach of having a secure transport layer API closely resembling sockets, to facilitate retrofitting preexisting network applications with security measures. ^[2] The SNP project received the 2004 ACM Software System Award. ^[3]

The SSL protocol was originally developed by Netscape. Version 1.0 was never publicly released; version 2.0 was released in February 1995 but "contained a number of security flaws which ultimately led to the design of SSL version 3.0", which was released in 1996 (Rescorla 2001). This later served as the basis for TLS version 1.0, an Internet Engineering Task Force (IETF) standard protocol first defined in RFC 2246 in January 1999. Visa^[4], MasterCard, American Express and many leading financial institutions have endorsed SSL for commerce over the Internet.^{[citation needed]}

SSL operates in modular fashion. It is extensible by design, with support for forward and backward compatibility and negotiation between peers.

[edit] Applications

TLS runs on layers beneath application protocols such as HTTP, FTP, SMTP, NNTP, and XMPP and above a reliable transport protocol, TCP for example. While it can add security to any protocol that uses reliable connections (such as TCP), it is most commonly used with HTTP to form HTTPS. HTTPS is used to secure World Wide Web pages for applications such as electronic commerce and asset management. SMTP is also an area in which TLS has been growing and is specified in RFC 3207. These applications use public key certificates to verify the identity of endpoints.

An increasing number of client and server products support TLS natively, but many still lack support. As an alternative, users may wish to use standalone TLS products like Stunnel. Wrappers such as Stunnel rely on being able to obtain a TLS connection immediately, by simply connecting to a separate port reserved for the purpose. For example, by default the TCP port for HTTPS is 443, to distinguish it from HTTP on port 80.

TLS can also be used to tunnel an entire network stack to create a VPN, as is the case with OpenVPN. Many vendors now marry TLS's encryption and authentication capabilities with authorization. There has also been substantial development since the late 1990s in creating client technology outside of the browser to enable support for client/server applications. When compared against traditional IPsec VPN technologies, TLS has some inherent advantages in firewall and NAT traversal that make it easier to administer for large remote-access populations.

TLS is also increasingly being used as the standard method for protecting SIP application signaling. TLS can be used to provide authentication and encryption of the SIP signalling associated with VoIP and other SIP-based applications.

[edit] Security

TLS/SSL have a variety of security measures:

• The client may use the certificate authority's (CA's) public key to validate the CA's digital signature on the server certificate. If the digital signature can be verified, the client accepts the server certificate as a valid certificate issued by a trusted CA.
• The client verifies that the issuing CA is on its list of trusted CAs.
• The client checks the server's certificate validity period. The authentication process stops if the current date and time fall outside of the validity period.
• Protection against a downgrade of the protocol to a previous (less secure) version or a weaker cipher suite.
• Numbering all the Application records with a sequence number, and using this sequence number in the message authentication codes (MACs).
• Using a message digest enhanced with a key (so only a key-holder can check the MAC). This is specified in RFC 2104. TLS only.
• The message that ends the handshake ("Finished") sends a hash of all the exchanged handshake messages seen by both parties.
• The pseudorandom function splits the input data in half and processes each one with a different hashing algorithm (MD5 and SHA-1), then XORs them together to create the MAC. This provides protection even if one of these algorithms is found to be vulnerable. TLS only.
• SSL v3 improved upon SSL v2 by adding SHA-1 based ciphers, and support for certificate authentication. Additional improvements in SSL v3 include better handshake protocol flow and increased resistance to man-in-the-middle attacks.

SSL v2 is flawed in a variety of ways:

• Identical cryptographic keys are used for message authentication and encryption.
• MACs are unnecessarily weakened in the "export mode" required by U.S. export restrictions (symmetric key length was limited to 40 bits in Netscape and Internet Explorer).
• SSL v2 has a weak MAC construction and relies solely on the MD5 hash function.
• SSL v2 does not have any protection for the handshake, meaning a man-in-the-middle downgrade attack can go undetected.
• SSL v2 uses the TCP connection close to indicate the end of data. This means that truncation attacks are possible: the attacker simply forges a TCP FIN, leaving the recipient unaware of an illegitimate end of data message (SSL v3 fixes this problem by having an explicit closure alert).
• SSL v2 assumes a single service, and a fixed domain certificate, which clashes with the standard feature of virtual hosting in webservers. This means that most websites are practically impaired from using SSL. TLS/SNI fixes this but is not deployed in webservers as yet.

SSL v2 is disabled by default in Internet Explorer 7,^[5] Mozilla Firefox 2 and Mozilla Firefox 3,^[6] and Safari. After it sends a TLS ClientHello, if Mozilla Firefox finds that the server is unable to complete the handshake, it will attempt to fall back to using SSL 3.0 with an SSL 3.0 ClientHello in SSL v2 format to maximize the likelihood of successfully handshaking with older servers.^[7] Support for SSL v2 (and weak 40-bit and 56-bit ciphers) has been removed completely from Opera as of version 9.5.^[8]

[edit] How it works

^[9]A TLS client and server negotiate a stateful connection by using a handshaking procedure. During this handshake, the client and server agree on various parameters used to establish the connection's security.

• The handshake begins when a client connects to a TLS-enabled server requesting a secure connection, and presents a list of supported ciphers and hash functions.
• From this list, the server picks the strongest cipher and hash function that it also supports and notifies the client of the decision.
• The server sends back its identification in the form of a digital certificate. The certificate usually contains the server name, the trusted certificate authority (CA), and the server's public encryption key.

The client may contact the server that issued the certificate (the trusted CA as above) and confirm that the certificate is authentic before proceeding.

• In order to generate the session keys used for the secure connection, the client encrypts a random number with the server's public key, and sends the result to the server. Only the server can decrypt it (with its private key): this is the one fact that makes the keys hidden from third parties, since only the server and the client have access to this data.
• From the random number, both parties generate key material for encryption and decryption.

This concludes the handshake and begins the secured connection, which is encrypted and decrypted with the key material until the connection closes.

If any one of the above steps fails, the TLS handshake fails, and the connection is not created.

[edit] TLS handshake in detail

The TLS protocol exchanges records, which encapsulate the data to be exchanged. Each record can be compressed, padded, appended with a message authentication code (MAC), or encrypted, all depending on the state of the connection. Each record has a content type field that specifies the record, a length field, and a TLS version field.

When the connection starts, the record encapsulates another protocol - the handshake messaging protocol - which has content type 22.

[edit] Simple TLS handshake

A simple connection example , illustrating a full handshake, follows:

• A Client sends a ClientHello message specifying the highest TLS protocol version it supports, a random number, a list of suggested cipher suites and compression methods.
• The Server responds with a ServerHello message, containing the chosen protocol version, a random number, cipher suite, and compression method from the choices offered by the client. The server may also send a session id as part of the message to perform a resumed handshake.
• The Server sends its Certificate message (depending on the selected cipher suite, this may be omitted by the Server).^[10]
• The Server sends a ServerHelloDone message, indicating it is done with handshake negotiation.
• The Client responds with a ClientKeyExchange message, which may contain a PreMasterSecret, public key, or nothing. (Again, this depends on the selected cipher.)
• The Client and Server then use the random numbers and PreMasterSecret to compute a common secret, called the "master secret". All other key data for this connection is derived from this master secret (and the client- and server-generated random values), which is passed through a carefully designed "pseudorandom function".
• The Client now sends a ChangeCipherSpec record, essentially telling the Server, "Everything I tell you from now on will be encrypted." Note that the ChangeCipherSpec is itself a record-level protocol, and has type 20, and not 22.
• Finally, the Client sends an encrypted Finished message, containing a hash and MAC over the previous handshake messages.
• The Server will attempt to decrypt the Client's Finished message, and verify the hash and MAC. If the decryption or verification fails, the handshake is considered to have failed and the connection should be torn down.
• Finally, the Server sends a ChangeCipherSpec and its encrypted Finished message, and the Client performs the same decryption and verification.
• At this point, the "handshake" is complete and the Application protocol is enabled, with content type of 23. Application messages exchanged between Client and Server will be encrypted.

[edit] Client-authenticated TLS handshake

The following example shows a client being authenticated via TLS using certificates.

• A Client sends a ClientHello message specifying the highest TLS protocol version it supports, a random number, a list of suggested cipher suites and compression methods.
• The Server responds with a ServerHello message, containing the chosen protocol version, a random number, cipher suite, and compression method from the choices offered by the client. The server may also send a session id as part of the message to perform a resumed handshake.
• The Server sends its ServerCertificate message (depending on the selected cipher suite, this may be omitted by the Server).^[10]
• The server requests a certificate from the client, so that the connection can be mutually authenticated, using a CertificateRequest message.
• The Server sends a ServerHelloDone message, indicating it is done with handshake negotiation.
• The Client responds with a Certificate message, which contains the client's certificate.
• The Client sends a ClientKeyExchange message, which may contain a PreMasterSecret, public key, or nothing. (Again, this depends on the selected cipher.) This PreMasterSecret is encrypted using the public key of the server certificate.
• The Client sends a CertificateVerify message, which is a signature over the previous handshake messages using the client's certificate's private key. This signature can be verified by using the client's certificate's public key. This lets the Server know that the Client has access to the private key of the certificate and thus owns the certificate.
• The Client and Server then use the random numbers and PreMasterSecret to compute a common secret, called the "master secret". All other key data for this connection is derived from this master secret (and the client- and server-generated random values), which is passed through a carefully designed "pseudorandom function".
• The Client now sends a ChangeCipherSpec record, essentially telling the Server, "Everything I tell you from now on will be encrypted." Note that the ChangeCipherSpec is itself a record-level protocol, and has type 20, and not 22.
• Finally, the Client sends an encrypted Finished message, containing a hash and MAC over the previous handshake messages.
• The Server will attempt to decrypt the Client's Finished message, and verify the hash and MAC. If the decryption or verification fails, the handshake is considered to have failed and the connection should be torn down.
• Finally, the Server sends a ChangeCipherSpec and its encrypted Finished message, and the Client performs the same decryption and verification.
• At this point, the "handshake" is complete and the Application protocol is enabled, with content type of 23. Application messages exchanged between Client and Server will be encrypted.
• The encryption protocol 324.22-9^{[clarification needed]} is implemented only in instances where the handshake goes awry.

[edit] Resumed TLS handshake

Public key operations (e.g., RSA) are relatively expensive in terms of computational power. TLS provides a secure shortcut in the handshake mechanism to avoid these operations. In an ordinary full handshake, the Server sends a session id as part of the ServerHello message. The Client associates this session id with the Server's IP address and TCP port, so that when the Client connects again to that Server, it can use the session id to shortcut the handshake. In the server, the session id maps to the cryptographic parameters previously negotiated, specifically the "master secret". Both sides must have the same "master secret" or the resumed handshake will fail (this prevents an eavesdropper from using a session id). The random data in the ClientHello and ServerHello messages virtually guarantee that the generated connection keys will be different than in the previous connection. In the RFCs, this type of handshake is called an abbreviated handshake. It is also described in the literature as a restart handshake.

• A Client sends a ClientHello message specifying the highest TLS protocol version it supports, a random number, a list of suggested cipher suites and compression methods. Included in the message is the session id from the previous TLS connection.
• The Server responds with a ServerHello message, containing the chosen protocol version, a random number, cipher suite, and compression method from the choices offered by the client. If the Server recognizes the session id sent by the client, it responds with the same session id. The Client uses this to recognize that a resumed handshake is being performed. If the server does not recognize the session id sent by the Client, it sends a different value for its session id. This tells the Client that a resumed handshake will not be performed. At this point, both the Client and Server have the "master secret" and random data to generate the key data to be used for this connection.
• The Server now sends a ChangeCipherSpec record, essentially telling the Client, "Everything I tell you from now on will be encrypted." Note that the ChangeCipherSpec is itself a record-level protocol, and has type 20, and not 22.
• The Server sends an encrypted Finished message, containing a hash and MAC over the previous handshake messages.
• The Client will attempt to decrypt the Servers's Finished message, and verify the hash and MAC. If the decryption or verification fails, the handshake is considered to have failed and the connection should be torn down.
• Finally, the Client sends a ChangeCipherSpec and its encrypted Finished message, and the Server performs the same decryption and verification. The Finished messages are used to validate that the Client and Server are using the same keys. If the validation of the Finished messages fail, then the resumed handshake fails and both the Client and Server purge the session id information and do not use it again.
• At this point, the "handshake" is complete and the Application protocol is enabled, with content type of 23. Application messages exchanged between Client and Server will be encrypted.
• If encryption fails, the handshake will not occur.

[edit] TLS record protocol

+	Bits 0–7	8-15	16-23	24–31
0	Content Type	Version (MSB)	Version (LSB)	Length (MSB)
32	Length (LSB)	Protocol Message(s)
...	Protocol Message (cont.)
...	MAC (optional)
...	Padding (block ciphers only)

Content Type

This field identifies the Record Layer Protocol Type contained in this Record.

Content Types
Hex	Dec	Type
0x14	20	ChangeCipherSpec
0x15	21	Alert
0x16	22	Handshake
0x17	23	Application

Version

This field identifies the major and minor version of TLS for the contained message. For a ClientHello message, this need not be the highest version supported by the client.

Versions
Major Version	Minor Version	Version Type
3	0	SSLv3
3	1	TLS 1.0
3	2	TLS 1.1
3	3	TLS 1.2

Length

The length of Protocol message(s), not to exceed 2¹⁴ bytes (16 KiB).

Protocol message(s)

One or more messages identified by the Protocol field. Note that this field may be encrypted depending on the state of the connection.

MAC

A message authentication code computed over the Protocol message, with additional key material included. Note that this field may be encrypted, or not included entirely, depending on the state of the connection.

[edit] ChangeCipherSpec protocol

+	Bits 0–7								8-15								16-23								24–31
0	20								Version								1 (CCS protocol type)

[edit] Alert protocol

+	Bits 0–7	8-15	16-23	24–31
0	21	Version (MSB)	Version (LSB)	0
32	2	Level	Description

Level

This field identifies the level of alert.

Level Types
Code	Description
1	Warning - connection or security may be unstable
2	Fatal - connection or security may be compromised, or an unrecoverable error has occurred

Description

This field identifies which type of alert is being sent.

Description Types
Code	Description
0	Close notify (warning or fatal)
10	Unexpected message (fatal)
20	Bad record MAC (fatal)
21	Decryption failed (fatal, TLS only)
22	Record overflow (fatal, TLS only)
30	Decompression failure (fatal)
40	Handshake failure (fatal)
41	No certificate (SSL v3 only) (warning or fatal)
42	Bad certificate (warning or fatal)
43	Unsupported certificate (warning or fatal)
44	Certificate revoked (warning or fatal)
45	Certificate expired (warning or fatal)
46	Certificate unknown (warning or fatal)
47	Illegal parameter (fatal)
48	Unknown CA (fatal, TLS only)
49	Access denied (fatal, TLS only)
50	Decode error (fatal, TLS only)
51	Decrypt error (TLS only) (warning or fatal)
60	Export restriction (fatal, TLS only)
70	Protocol version (fatal, TLS only)
71	Insufficient security (fatal, TLS only)
80	Internal error (fatal, TLS only)
90	User cancelled (fatal, TLS only)
100	No renegotiation (warning, TLS only)

[edit] Handshake protocol

+	Bits 0–7								8-15								16-23								24–31
0	22								Version (MSB)								Version (LSB)								Length (MSB)
32	Length (LSB)								Message type								Message length
64	Message length (cont.)								Handshake message
...	Handshake message								Message type								Message length
...	Message length (cont.)								Handshake message

Message type

This field identifies the Handshake message type.

Message Types
Code	Description
0	HelloRequest
1	ClientHello
2	ServerHello
11	Certificate
12	ServerKeyExchange
13	CertificateRequest
14	ServerHelloDone
15	CertificateVerify
16	ClientKeyExchange
20	Finished

Message length

This is a 3-byte field indicating the length of the handshake data, not including the header.

Note that multiple Handshake messages may be combined within one record.

[edit] Application protocol

+	Bits 0–7								8-15								16-23								24–31
0	23								Version (MSB)								Version (LSB)								Length (MSB)
32	Length (LSB)								Application data
64	Application data (cont.)
...	MAC (20B for SHA-1, 16B for MD5)
...	Variable length padding (block ciphers only)																								Padding length, (block ciphers only)(1B)

[edit] Support for name-based virtual servers

From the application protocol point of view, TLS belongs to a lower layer, although the TCP/IP model is too coarse to show it. This means that the TLS handshake is usually (except in the STARTTLS case) performed before the application protocol can start. The name-based virtual server feature being provided by the application layer, all co-hosted virtual servers share the same certificate because the server has to select and send a certificate immediately after the ClientHello message. This is a big problem in hosting environments because it means either sharing the same certificate among all customers or using a different IP address for each of them.

There are two known workarounds provided by X.509:

• If all virtual servers belongs to the same domain, you can use a wildcard certificate. Besides the loose host name selection that might be a problem or not, there is no common agreement about how to match wildcard certificates. Different rules are applied depending on the application protocol or software used.^[11]
• Add every virtual host name in the subjectAltName extension. The major problem being that you need to reissue a certificate whenever you declare a new virtual server.

In order to provide the server name, RFC 4366 Transport Layer Security (TLS) Extensions allow clients to include a Server Name Indication extension (SNI) in the extended ClientHello message. This extension hints the server immediately which name the client wishes to connect to, so the server can select the appropriate certificate to send to the client.

[edit] Government-imposed protocol limitations

Some early implementations of SSL used 40-bit symmetric keys because of US government restrictions on the export of cryptographic technology. After several years of public controversy, a series of lawsuits, and eventual US government recognition of cryptographic products with longer key sizes produced outside the US, the authorities relaxed some aspects of the export restrictions.

[edit] Implementations

SSL and TLS have been widely implemented in several open source software projects. Programmers may use the OpenSSL, NSS, or GnuTLS libraries for SSL/TLS functionality. Microsoft Windows includes an implementation of SSL and TLS as part of its Secure Channel package. Delphi programmers may use a library called Indy.

[edit] Standards

The current approved version is 1.2, which is specified in:

• RFC 5246: “The Transport Layer Security (TLS) Protocol Version 1.2”.

The current standard obsoletes these former versions:

• RFC 2246: “The TLS Protocol Version 1.0”.
• RFC 4346: “The Transport Layer Security (TLS) Protocol Version 1.1”.

Other RFCs subsequently extended TLS, including:

• RFC 2595: “Using TLS with IMAP, POP3 and ACAP”. Specifies an extension to the IMAP, POP3 and ACAP services that allow the server and client to use transport-layer security to provide private, authenticated communication over the Internet.
• RFC 2712: “Addition of Kerberos Cipher Suites to Transport Layer Security (TLS)”. The 40-bit ciphersuites defined in this memo appear only for the purpose of documenting the fact that those ciphersuite codes have already been assigned.
• RFC 2817: “Upgrading to TLS Within HTTP/1.1”, explains how to use the Upgrade mechanism in HTTP/1.1 to initiate Transport Layer Security (TLS) over an existing TCP connection. This allows unsecured and secured HTTP traffic to share the same well known port (in this case, http: at 80 rather than https: at 443).
• RFC 2818: “HTTP Over TLS”, distinguishes secured traffic from insecure traffic by the use of a different 'server port'.
• RFC 3207: “SMTP Service Extension for Secure SMTP over Transport Layer Security”. Specifies an extension to the SMTP service that allows an SMTP server and client to use transport-layer security to provide private, authenticated communication over the Internet.
• RFC 3268: “AES Ciphersuites for TLS”. Adds Advanced Encryption Standard (AES) ciphersuites to the previously existing symmetric ciphers.
• RFC 3546: “Transport Layer Security (TLS) Extensions”, adds a mechanism for negotiating protocol extensions during session initialisation and defines some extensions. Made obsolete by RFC 4366.
• RFC 3749: “Transport Layer Security Protocol Compression Methods”, specifies the framework for compression methods and the DEFLATE compression method.
• RFC 3943: “Transport Layer Security (TLS) Protocol Compression Using Lempel-Ziv-Stac (LZS)”.
• RFC 4132: “Addition of Camellia Cipher Suites to Transport Layer Security (TLS)”.
• RFC 4162: “Addition of SEED Cipher Suites to Transport Layer Security (TLS)”.
• RFC 4217: “Securing FTP with TLS”.
• RFC 4279: “Pre-Shared Key Ciphersuites for Transport Layer Security (TLS)”, adds three sets of new ciphersuites for the TLS protocol to support authentication based on pre-shared keys.
• RFC 4347: “Datagram Transport Layer Security” specifies a TLS variant that works over datagram protocols (such as UDP).
• RFC 4366: “Transport Layer Security (TLS) Extensions” describes both a set of specific extensions, and a generic extension mechanism.
• RFC 4492: “Elliptic Curve Cryptography (ECC) Cipher Suites for Transport Layer Security (TLS)”.
• RFC 4507: “Transport Layer Security (TLS) Session Resumption without Server-Side State”.
• RFC 4680: “TLS Handshake Message for Supplemental Data”.
• RFC 4681: “TLS User Mapping Extension”.
• RFC 4785: “Pre-Shared Key (PSK) Ciphersuites with NULL Encryption for Transport Layer Security (TLS)”.

[edit] See also

• Certificate authority
• Public key certificate
• Extended Validation Certificate
• SSL acceleration
• Datagram Transport Layer Security
• Multiplexed Transport Layer Security
• X.509
• Virtual private network
• SEED
• Server gated cryptography

[edit] Software

• OpenSSL: a free (and very popular) implementation (BSD license with some extensions)
• GnuTLS: a free LGPL licensed implementation
• JSSE: a Java implementation included in the Java Runtime Environment
• Network Security Services (NSS): FIPS 140 validated open source library

[edit] References and footnotes

[edit] Further reading

• Wagner, David; Schneier, Bruce (November 1996). "Analysis of the SSL 3.0 Protocol". The Second USENIX Workshop on Electronic Commerce Proceedings, USENIX Press. 
• Eric Rescorla. SSL and TLS: Designing and Building Secure Systems. United States: Addison-Wesley Pub Co. ISBN 0-201-61598-3. 
• Stephen A. Thomas (2000). SSL and TLS essentials securing the Web. New York: Wiley. ISBN 0-471-38354-6. 
• Bard, Gregory (2006). "A Challenging But Feasible Blockwise-Adaptive Chosen-Plaintext Attack On Ssl". International Association for Cryptologic Research (136). http://citeseer.ist.psu.edu/bard04vulnerability.html. Retrieved on 20 April 2007. 
• Canvel, Brice. "Password Interception in a SSL/TLS Channel". Retrieved on 2007-04-20.

[edit] External links

• SSL 2 specification (published 1994)
• SSL 3.0 specification (published 1996)
• Netscape's final SSL 3.0 draft (1996)
• The IETF TLS Workgroup
• SSL tutorial
• OpenSSL thread safe connections tutorial with example source code
• ECMAScript Secure Transform (Web 2 Secure Transform Method)

• ECMAScript Secure Transform (Web leo Secure Transform Method)
• Explanation of HTTPS and SSL Protocol (What to look for in web browsers)

This article was originally based on material from the Free On-line Dictionary of Computing, which is licensed under the GFDL.