JCP G80 100% Bond February 1, 2008 

Bond Paper FSC 7530 

 

Use Information: This paragraph is informational only and is not exclusively definitive of the end use. 

For highest quality offset printing and embossing of stationery used by officials at the highest level of Government, requiring 
execution with pen and ink, erasing quality, and permanence and suitable for processing in laser printers. Printed matter may 
include text and line illustrations. 

 

Stock: 100% cotton or linen fibers. No fluorescent 
(optical) brighteners shall be added to the pulp or paper 
during manufacture. Fluorescence, due to residual white 
water, broke, or natural fibers, is permissible; provided the 
increase in reflectance, measured with and without the 
ultraviolet component of a light source of 3100 kelvin in 
combination with a C.I.E. (International Commission on 
Illumination) Z (blue) filter, does not exceed 2.0%. 

Note:1 Postconsumer fiber, in any percentage, is 
encouraged, provided that the requirements of this 
Standard are met. 

 

Acidity: pH value, not less than 6.5 

 

Basis weight: 17 by 22 inches, 

500 sheets (pounds)……………………… 20 24 

A tolerance of +5% shall be allowed. 

 

Folding endurance: Average not less 

than (MIT double folds) …………………. 400 400 

 

Ruling and writing quality: Lines ruled and characters 

written with ball point and felt tip pens shall be clear cut 
and free from excessive feathering. 

 

Erasing quality: Paper shall retain good ruling, writing, 

and typing quality, texture, and surface appearance, 
without ink spreading after repeated erasure. 

 

Watermark2: Shall be the seal of the United States, with 
four stars and year of manufacture, on the basis of four 
times on a sheet 17 by 22 inches, one in each quarter. The 
watermark shall be clear and legible. When viewed from 
the felt side of the sheet, the design shall appear as 
illustrated in Part 3 (Style C or F.) 

 

Curl: Paper shall like flat before and after processing 
through a high speed copier or laser printer with either no 
tendency to curl or with a curl which can be overcome 
under reasonable working conditions. 

 

 General appearance: Paper shall conform to the standard 
sample(s) established by the Government. 

Brightness: Shall target not less than 82% or as specified. 

Color: The paper in the order (or publication) shall be 
uniform and the color variation shall not exceed 
DE(CIELAB) = 1.0. 

Finish and formation: Shall be uniform. 

Cleanliness: The dirt count for each side of the paper shall 
not exceed 250 specks per square meter. No sample sheet 
(600 to 650 cm2 in size) shall contain more than one defect 
with equivalent area of 0.25 mm2 or greater. 

 

 

 

 

Testing: Shall be conducted in accordance with methods in part 2, Government Paper Specification Standards. The 
acceptance criteria Part 4 shall apply. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

__________ 

1 This grade with the Government watermark is available in mill run quantities only. 

 

2 Full size copy will be provided upon request.