1999 Progress Report: Environmentally Conscious Manufacturing: Design for Disassembly (DFD) in De-Manufacturing of Products
EPA Grant Number: R825370C067Subproject: this is subproject number 067 , established and managed by the Center Director under grant R825370
(EPA does not fund or establish subprojects; EPA awards and manages the overall grant for this center).
Center: EERC - National Center for Clean Industrial and Treatment Technologies (CenCITT)
Center Director: Crittenden, John C.
Title: Environmentally Conscious Manufacturing: Design for Disassembly (DFD) in De-Manufacturing of Products
Investigators: Gadh, Rajit
Institution: University of Wisconsin - Madison
EPA Project Officer: Karn, Barbara
Project Period: January 1, 1997 through January 1, 1999
Project Period Covered by this Report: January 1, 1998 through January 1, 1999
RFA: Exploratory Environmental Research Centers (1992)
Research Category: Center for Clean Industrial and Treatment Technologies (CenCITT) , Targeted Research
Description:
Objective:The research goals are:
1) Allow environmental engineers and designers at different locations to collaborate
and design products that can be assembled in a cost-effective manner so that
final disassembly and disposal of the materials and components in them can be
effectively and economically achieved.
2) Generate automatically the disassembly and disposal instructions from the
product design information, using the DFD tool, which can be accessed by the
person in
charge of disposing the product via the De-Manufacturing Web.
3) Empower the consumer to dispose the product in an environmentally sound manner,
following the disassembly instruction on the web, in a way that would maximize
reuse and minimize waste.
Design for Disassembly (DFD) allows efficient separation of components for product recycling and disposal. Currently, products are acquired with no clear plan of disposal of the product. Often, consumers are left with no other choice at the end of a product's life but to dispose of it by throwing it in the trash.
The de-manufacturing program at the University of Wisconsin-Madison addresses the question of systematically designing for easier products dismantling and disposal. Moreover, financial measures for justification of de-manufacturing in the Product Life Cycle to companies encourages them to invest further in design for disassembly methodology.
This research develops a framework for allowing the investigation of the universal Product Environmental (PE) index for a given product directly during design and well before production. The PE index determines the environmental impact engendered by the creation and dismantling of mechanical product sub-assemblies, within automobile or aircraft. By comparing and contrasting different design alternative, the optimal PE index value design may be selected.
The PE index is being defined that is valid within a given class of manufactured products. The definition of PE index is based partly on existing indices and partly on new research findings regarding the environmental effects of creating and dismantling products. While existing indices have relied primarily on the pollution due to the chemical constituents to measure environmental consequences, these definitions will be expanded to include mechanical component fabrication, assembly activities, disassembly activities, and component de-fabrication activities.
The first focus is on plastic assemblies, which have the following important
characteristics with respect to mechanical de-manufacturing:
(I) Dies are expensive and have significant environmental implications.
(II) The following variables in a die are expected to be the most significant
contributors to PE: (a) shape, (b) tolerance, and (c) weight/volume/size/bulk.
(III) The injection molding process has significant PE impact due to energy
needed in manufacturing.
(IV) The assembly process requires energy and so will add to the PE.
(V) The disassembly process tends to be energy-expensive and is expected to
contribute significantly to the de-manufacturing process. At the conclusion
of the
project, the effect of design decisions on the PE index contribution due to
the above product life cycle steps will be determined.
![](https://webarchive.library.unt.edu/eot2008/20081106072935im_/http://es.epa.gov/ncer/progress/images/R825370C067_99_001.jpg)
A web-based software tool called De-Manufacturing Web that supports collaborative de-manufacturing (disassembly, service, recycling and disposal) between manufacturer, demanufacturer, disposer, customer and designer, is being developed. A webenabled DFD software program has been developed for determining the disassembly sequence and cost of product assemblies utilizing the product domain, material, and environmental databases. Some of the Preliminary implementation results (including automotive and consumer electronics) of the DFD tool are presented in Figures 1-3.
Additional information on the De-manufacturing Web tool can be found at http://emedia_pc1.emedia.engr.wisc.edu/deman/ .
Additional information on the DFD tool can be found at http://smartcad.me.wisc.edu/groups/disassembly
.
Application of software to real-world product designs: The research methodology and the software has been applied to two classes of products:
-
1) electro-mechanical assemblies - cellular phone and printer assemblies, and
2) large mechanical assemblies - dashboard subassembly, IC engine assembly, augmentor assembly, aircraft engine subassembly and conceptual aircraft assembly.
Collaboration with industry: Significant interaction and exchange has occurred with several automotive and aerospace companies. Currently, Prof. Gadh is having discussions with Ford, Hayes Lemmerz (an automotive supplier), and Pratt & Whitney on using the software developed for specific applications within each company.
The DFD software system has been demonstrated to the following industrial groups: Pratt & Whitney-Florida, United Technologies Engineering Coordinate Activities-Connecticut, and Stanford University workshop on Virtual Prototyping attended by several companies including Boeing, GM, and General Electric.
Graduate student Ramon Figueroa spent the summers of 1998 and 1999 with Pratt and Whitney/United Technologies, West Palm Beach, Florida. There, he investigated jointly with Pratt and Whitney the usage of the DFD software system within their Engineering Design and Manufacturing programs.
Journal Articles on this Report: 5 Displayed | Download in RIS Format
Other subproject views: | All 27 publications | 11 publications in selected types | All 9 journal articles |
Other center views: | All 156 publications | 47 publications in selected types | All 36 journal articles |
Type | Citation | ||
---|---|---|---|
|
Lee K, Gadh R. Destructive disassembly to support virtual prototyping. Iie Transactions 1998;30(10):959-972 |
R825370C067 (1999) |
not available |
|
Shyamsundar N, Gadh R. Geometric abstractions to support disassembly analysis. Iie Transactions (Design & Manufacturing). 1999;31(10):935-946. |
R825370C067 (1998) R825370C067 (1999) |
not available |
|
Srinivasan H, Figueroa R, Gadh R. "Selective Disassembly for Virtual Prototyping as Applied to De-manufacturing." Journal of Robotics and Computer Integrated Manufacturing 1999;15(3):231-245. |
R825370 (1998) R825370C067 (1999) |
not available |
|
Srinivasan H, Gadh R. Efficient geometric disassembly of multiple components from an assembly using wave propagation. Journal of Mechanical Design 2000;122(2):179-184 |
R825370C067 (1998) R825370C067 (1999) |
not available |
|
Srinivasan H, Gadh R. A non-interfering selective disassembly sequence for components with geometric constraints. Iie Transactions 2001;34(4):349-361 |
R825370C067 (1999) |
not available |
Ecosystem Protection/Environmental Exposure & Risk, INTERNATIONAL COOPERATION, Sustainable Industry/Business, Scientific Discipline, RFA, computing technology, Environmental Engineering, cleaner production/pollution prevention, Economics and Business, pollution prevention, information technology, process modification, decision support tool, clean technology, industrial design for environment, cleaner production, in-process changes, life cycle analysis, green design, pollution prevention design tool, computer science, decision making, in-process waste minimization, occupational safety, Design for Environment, product life cycle, environmentally conscious manufacturing, outreach and education, industrial process design, Monte Carlo simulator, cash flow analysis, industrial innovations, industrial process, environmentally friendly technology, design for disassembly, life cycle assessment, DfE, CPAS, physico-chemical properties, chemical process safety, innovative technology, environmentally conscious design, Clean Process Advisory System (CPAS), accident probablility, green technology, demanufacturing
Progress and Final Reports:
1998 Progress Report
Original Abstract
Main Center Abstract and Reports:
R825370 EERC - National Center for Clean Industrial and Treatment Technologies (CenCITT)
Subprojects under this Center:
(EPA does not fund or establish subprojects; EPA awards and manages the overall grant for this center).
R825370C032 Means for Producing an Entirely New Generation of Lignin-Based Plastics
R825370C042 Environmentally Conscious Design for Construction
R825370C046 Clean Process Advisory System (CPAS) Core Activities
R825370C048 Investigation of the Partial Oxidation of Methane to Methanol in a Simulated Countercurrent Moving Bed Reactor
R825370C054 Predictive Tool for Ultrafiltration Performance
R825370C055 Heuristic Reactor Design for Clean Synthesis and Processing - Separative Reactors
R825370C056 Characterization of Selective Solid Acid Catalysts Towards the Rational Design of Catalytic Reactions
R825370C057 Environmentally Conscious Manufacturing: Prediction of Processing Waste Streams for Discrete Products
R825370C064 The Physical Properties Management System (PPMS): A P2 Engineering Aid to Support Process Design and Analysis
R825370C065 Development and Testing of Pollution Prevention Design Aids for Process Analysis and Decision Making
R825370C066 Design Tools for Chemical Process Safety: Accident Probability
R825370C067 Environmentally Conscious Manufacturing: Design for Disassembly (DFD) in De-Manufacturing of Products
R825370C068 An Economic Comparison of Wet and Dry Machining
R825370C069 In-Line Copper Recovery Technology
R825370C070 Selective Catalytic Hydrogenation of Lactic Acid
R825370C071 Biosynthesis of Polyhydroxyalkanoate Polymers from Industrial Wastewater
R825370C072 Tin Zeolites for Partial Oxidation Catalysis
R825370C073 Development of a High Performance Photocatalytic Reactor System for the Production of Methanol from Methane in the Gas Phase
R825370C074 Recovery of Waste Polymer Generated by Lost Foam Technology in the Metal Casting Industry
R825370C075 Industrial Implementation of the P2 Framework
R825370C076 Establishing Automated Linkages Between Existing P2-Related Software Design Tools
R825370C077 Integrated Applications of the Clean Process Advisory System to P2-Conscious Process Analysis and Improvement
R825370C078 Development of Environmental Indices for Green Chemical Production and Use