Buffer Zones Fact Sheet
Current as of August 29, 2008
EPA is requiring important new safety measures for soil fumigant pesticides. This fact sheet summarizes new requirements for buffer zones around fumigated fields. Buffer zones will increase protections for agricultural workers and bystanders – people who live, work, or otherwise spend time near fields that are fumigated. When new fumigant labels appear in the market place around 2010, fumigant users will need to establish buffer zones around treated fields to reduce risks from acute inhalation exposure to bystanders.
Due to their volatile nature, soil fumigants have the potential to pose risk concerns to people involved in the application (handlers), workers who re-enter fumigated fields (workers), and people who may be near the treated area (bystanders). EPA’s Reregistration Eligibility Decisions (REDs) for the fumigants chloropicrin, dazomet, metam sodium/potassium, and methyl bromide include a suite of measures designed to work together to reduce exposures, enhance safety, and facilitate compliance and enforcement. These mitigation measures include:
- worker protections
- fumigant management plans
- stewardship and training programs
- good agricultural practices
- buffer zones
- posting requirements
- emergency preparedness and response measures
EPA is accepting public comment until October 30, 2008, on implementation of the risk mitigation measures in the soil fumigant REDs. For additional information, please see the Agency’s August 29, 2008, and July 16, 2008, Federal Register notices announcing these decisions, and Web page on risk mitigation measures for the soil fumigants.
Buffer Zone Distances
A buffer zone provides distance between the application site (i.e., edge of field) and bystanders, allowing airborne residues to disperse before reaching the bystanders. This buffer will reduce the chances that air concentrations where bystanders are located will cause acute adverse health effects.
EPA has selected buffer distances that will protect bystanders from acute exposures, but which are not so great as to eliminate benefits of soil fumigant use. The size of the buffer zones is based on the following factors:
- application rate;
- field size;
- application equipment and methods; and,
- emission-control measures (e.g., tarps).
Buffer zone distances are scenario-based using applicable site conditions and will be based on look-up tables on product labels. EPA is also giving “credits” to encourage users to employ practices which reduce emissions. Credits will reduce buffer distances. Some credits will also be available for site conditions that reduce emissions (e.g., high organic or clay content of soils).
New Requirements for Buffer Zones
To address the risk to bystanders who live and work near fumigated fields, the Agency is requiring buffer zones. The following summarizes the buffer zone requirements:
- A “buffer zone” must be established around the perimeter of each application block or greenhouse where a soil fumigant is applied. The buffer zone must extend from the edge of the application block or greenhouse perimeter equally in all directions.
- All non-handlers including field workers, nearby residents, pedestrians, and other bystanders must be excluded from the buffer zone during the buffer zone period, except for people in transit (see exemptions section below).
- The “buffer zone period” starts at the moment when any fumigant is delivered/ dispensed to the soil within the application block or greenhouse and lasts for a minimum of 48 hours after the fumigant has stopped being delivered/dispensed to the soil.
- Buffer zone distances must be based on look-up tables on product labels (25 feet is the smallest distance regardless of site-specific application parameters).
- For selective replant fumigation in an orchard using hand held application methods (e.g., deep injection auger probes), the minimum buffer zone will be 25 feet measured from the center of each injection site (i.e., tree hole).
- Only authorized handlers who have been properly trained and equipped according to EPA’s Worker Protection Standard (WPS) and label requirements may be in the buffer zone during the buffer zone period.
- To reduce the potential for off-site movement from multiple fumigated fields, buffer zones from multiple application blocks may not overlap (including blocks fumigated by adjacent property owners). See exemptions below for areas not under the control of the owner/operator of the application block.
- No fumigant applications will be permitted within 0.25 miles of schools, state licensed daycare centers, nursing homes, assisted living facilities, elder care facilities, hospitals, in-patient clinics, and prisons if occupied during the buffer zone period.
- Vehicular and bicycle traffic on public and private roadways through the buffer zone is permitted. "Roadway" means that portion of a street or highway improved, designed or ordinarily used for vehicular travel, exclusive of the sidewalk or shoulder even though such sidewalk or shoulder is used by persons riding bicycles. In the event a highway includes two or more separated roadways, the term "roadway" shall refer to any such roadway separately.
- Bus stops or other locations where persons wait for public transit are not permitted within the buffer zone.
- See the Posting Section for additional requirements that may apply.
- Buffer zones may not include buildings used for storage such as sheds, barns, garages, etc., UNLESS,
- The storage buildings are not occupied during the buffer zone period, and
- The storage buildings do not share a common wall with an occupied structure.
- See the Posting Section for additional requirements that may apply.
- Buffer zones may not include residential areas (including employee housing, private property, buildings, commercial, industrial, and other areas that people may occupy or outdoor residential areas, such as lawns, gardens, or play areas) UNLESS,
- The occupants provide written agreement that they will voluntarily vacate the buffer zone during the entire buffer zone period, and
- Reentry by occupants and other non-handlers does not occur until,
- The buffer zone period has ended, and
- Air monitoring after the buffer zone period ends indicates that the air concentrations within the structure/space are less than the acceptable air concentration on the label, as determined by air monitoring requirements described on product labels (the number of samples, duration between samples, and air concentration level varies by fumigant).
- Buffer zones may not include agricultural areas owned/operated by persons other than the owner/operator of the application block, UNLESS,
- The owner/operator of the application block can ensure that the buffer zone will not overlap with a buffer zone from any adjacent property owners, and
- The owner/operator of the areas that are not under the control of the application provides written agreement to the applicator that they, their employees, and other persons will stay out of the buffer zone during the entire buffer zone period.
- Buffer zones may not include publicly owned and/or operated areas (e.g., parks, rights of way, sidewalks, walking paths, playgrounds, athletic fields, etc), UNLESS,
- The area is not occupied during the buffer zone period,
- Entry by non-handlers is prohibited during the buffer zone period, and
- Written permission to include the public area in the buffer zone is granted by the appropriate state and/or local authorities responsible for management and operation of the area.
- See the Posting Section for additional requirements that may apply.
General
Buffer zone distances
Authorized entry to buffer zones
Buffer zone proximity
Exemptions for transit through buffer zones
Structures under the control of owner/operator of the application block
Areas not under the control of owner/operator of the application block