Printed Wiring Board Industry - Factsheet
Making the Connection
Why Is EPA Working With the PWB Industry?
What Are the Partnership's Goals?
What Is Design for the Environment?
How Can I Get More Information?
Why Is EPA Working With the PWB Industry?
Printed wiring boards (PWBs), the underlying link between semiconductors, computer chips, and other electronic components, are an irreplaceable part of many high-tech products in the electronics, defense, communications, and automotive industries. The wet chemical processes used in PWB manufacturing, however, generate a significant amount of hazardous waste, require a substantial amount of water and energy, and use chemicals that pose potential environmental and health risks. In addition, the most commonly used PWB finishing technologies, hot air solder leveling (HASL) and electroplated tin-lead, pose potential health and environmental risks due to their use of lead. These processes also generate quantities of excess solder that must be recycled.
The industry is committed to making pollution prevention a priority; however, many PWB manufacturers are small- to medium-sized businesses that cannot afford to develop independently the data needed to redesign their processes. EPAs Design for the Environment (DfE) Program entered into a voluntary partnership with the PWB industry and other interested parties to facilitate the evaluation and implementation of alternative technologies that reduce health and environmental risks and production costs.
back to top | Printed Wiring Board Partnership
What Are the Partnership's Goals?
The DfE PWB Partnership encourages companies to implement technologies that will improve their environmental performance and competitiveness. The project team, in close cooperation with IPC, the national PWB trade association, is developing and analyzing technical information on pollution prevention technologies that reduce human and environmental risks, hazardous waste generation, compliance costs, and chemical and natural resource use.
back to top | Printed Wiring Board Partnership
What Work Is Being Conducted?
PWB Partnership work is focused in three main areas: gathering, generating, and analyzing technical data; communicating project and technical information; and promoting the implementation of cleaner technologies through education and technical assistance.
Technical Studies
In 1995, the DfE PWB Partnership Technical Workgroup chose one major step
in PWB manufacturingmaking drilled through-holes conductive (MHC)for
detailed analysis in a Cleaner Technologies Substitutes Assessment (CTSA).
A CTSA is a comprehensive analytical tool used to evaluate health and
environmental risks, performance, and costs of alternative materials,
processes, and technologies. The draft MHC CTSA was completed in 1997,
and the final CTSA was published in 1998 (see bottom of back page to order).
As part of the MHC CTSA, seven MHC technologies (including nonconveyorized electroless copper and six direct metallization technologies) were tested for performance characteristics in real-world settings. EPA recruited 26 facilities in the United States and Europe for testing purposes. Each company processed three standard boards through its MHC process line. The boards were then sent to one site to complete the final manufacturing steps and were tested for electrical and mechanical reliability.
The results indicated that when implemented correctly the alternative technologies perform as well or better than the nonconveyorized electroless copper. The alternative technologies also are more economical and use less energy and water. Risk characterization studies conducted as part of the CTSA suggest that the alternative technologies also pose lower occupational risk. Risks could not be assessed for all of the chemicals used in each MHC technology, however, because some suppliers would not provide proprietary formulation data.
In 1997, the project team began a second CTSA to evaluate lead-free alternatives to the most commonly used surface finishing technologies: HASL and electroplated tin-lead. Using HASL as the baseline technology, the second CTSA is evaluating the performance, risk, and cost of HASL and several other technologies, including organic solder protectorates, immersion silver, immersion tin, electroless nickel/immersion gold, and electroless nickel/electroless palladium/immersion gold.
To gauge performance, the alternative surface finishes were applied to test boards containing a variety of circuitry. Next, the board circuit performance was assessed under applicable environmental stresses. The boards also were evaluated through a series of reliability tests including thermal shock, mechanical shock, and vibration. EPA expects that the study results (scheduled for release in mid-2000) will generate interest in the implementation of cleaner, cost-effective surface finish technologies by PWB manufacturers.
In addition to the CTSA work, industry partners have conducted a survey to obtain information about the use of pollution prevention technologies in the PWB industry (Printed Wiring Board Pollution Prevention and Control: Analysis of Updated Survey Results, EPA744-R-98-003). The report contains data on waste and chemical use reduction achieved through implementing these technologies. The project team has also compiled information on PWB markets, products, technology trends, and current manufacturing methods (Printed Wiring Board Industry and Use Cluster Profile, EPA744-R-95-005) as well as information on federal environmental regulations pertaining to the electronics industry (Federal Environmental Regulations Affecting the Electronics Industry, EPA744-B-95-001). All project documents can be obtained by contacting the Pollution Prevention Information Clearinghouse or may be viewed on the PWB Publications page.
Communications Efforts
Throughout the PWB Partnership, EPA and the project partners have conducted
outreach activities to promote awareness of the project and to generate
interest in the projects technical and information products. These
communication efforts also have helped to identify other pollution prevention
opportunities within the industry, in addition to the alternative technologies
evaluated in the CTSAs. Stakeholders have given presentations at PWB trade
shows, written articles for the PWB trade press, distributed DfE information
products at booth exhibits, developed project fact sheets, and created
a Web site for the project. Also, the Communication Workgroup has produced
nine case studies on pollution prevention and environmental management
initiatives undertaken by PWB manufacturers. The case studies provide
practical information on workplace practices, equipment, technologies,
and management systems that result in risk reduction and cost savings.
The studies are available from the Pollution Prevention Information Clearinghouse
(see below).
Implementation Efforts
The PWB Partnership Implementation Workgroup provides education and assistance
to individual PWB manufacturers and encourages them to consider implementing
the cleaner technologies identified in the project. To date, the workgroup
has accomplished the following:
- Developed and published a guidance document (Implementing Cleaner Technologies in the Printed Wiring Board Industry: Making Holes Conductive, EPA744-R-97-001), which contains first-hand information about manufacturers experiences with various making holes conductive technologies. A similar guidance document for implementing alternative surface finishes is also being developed.
- Conducted seminars nationwide to present the results of the MHC CTSA; seminars will also be conducted to present the results of the surface finishes CTSA.
back to top | Printed Wiring Board Partnership
What Is Design for the Environment?
EPA's Design for the Environment (DfE) Program is a voluntary initiative that forms partnerships with a variety of stakeholder groups in an effort to:
- Encourage businesses to incorporate environmental concerns, in addition to the traditional criteria of cost and performance, into their decisions.
- Effect behavior change to facilitate continuous environmental improvement.
To accomplish these goals, the program uses EPAs expertise and leadership to evaluate the human health and environmental risks, performance, and cost of traditional and alternative technologies, materials, and processes. DfE disseminates information on its work to all interested parties and helps businesses implement cleaner technologies identified through the program.
The program has formed cooperative partnerships with the following industries:
- Printed wiring board
- Computer display
- Printing
- Garment and textile care
- Automotive refinishing
- Industrial/institutional laundry
back to top | Printed Wiring Board Partnership
How Can I Get More Information?
To obtain project documents or learn more about EPAs DfE Program or DfE PWB Project, contact:
Pollution
Prevention Information Clearinghouse
U.S. Environmental Protection Agency
1200 Pennsylvania Ave. NW (7407-T)
Washington, DC 20460-0001
Phone: 202-566-0799
FAX: 202-566-0794
E-mail: ppic@epa.gov
back to top | Printed Wiring Board Partnership
![]() |