�2.9 Safe Loading

Question 1: Is a vehicle's cargo compartment considered sealed according to the terms of �2.9(b)(4) when it is secured with a padlock, to which the driver holds a key?

Guidance: No. The driver has ready access to the cargo compartment by using the padlock key and would be required to perform the examinations of the cargo and load-securing devices described in �2.9(b).

Question 2: Does the FHWA have authority to enforce the safe loading requirements against a shipper that is not the motor carrier?

Guidance: No, unless HM as defined in �2.101 are involved. It is the responsibility of the motor carrier and the driver to ensure that any cargo aboard a vehicle is properly loaded and secured.

Question 3: How may the motor carrier determine safe loading when a shipper has loaded and sealed the trailer?

Guidance: Under these circumstances, a motor carrier may fulfill its responsibilities for proper loading a number of ways. Examples are: a. Arrange for supervision of loading to determine compliance; or

b. Obtain notation on the connecting line freight bill that the lading was properly loaded; or

c. Obtain approval to break the seal to permit inspection.

Question 4: Is there a requirement that a driver must personally load, block, brace, and tie down the cargo on the property carrying CMV he/she drives?

Guidance: No. But the driver is required to be familiar with methods and procedures for securing cargo, and may have to adjust the cargo or load securing devices pursuant to �2.9(b).