Isis 3 Application Documentation
Creates a control network for a list of images
Description
This program is being released for a very specific purpose for which it seems to work.
It is only a preliminary version, and most likely contains errors. It is not ready for general
purpose use. Please do not report errors. The documentation is not complete and may
be inaccurate. USE AT YOUR OWN RISK.
This program creates a first guess control network with tie points between
overlapping images. The control network is based on the available pointing information
for each image (most likely SPICE).
Categories
History
Stuart Sides | 2005-08-20 |
Original version
|
Steven Lambright | 2007-07-27 |
Changed category from Geometry to Control Networks
|
|
Parameter Groups
Files
Name
|
Description
|
FROMLIST |
List of Input cubes to create a control network for
|
SEEDDEF |
PVL file containing the description of the autoseed plugin
|
TO |
Output control network
|
Control
Name
|
Description
|
NETWORKID |
Name of this control network
|
POINTID |
The pattern to be used to create point ids.
|
DESCRIPTION |
The description of the network.
|
|
Files:
FROMLIST
Description
Use this parameter to select the filename which contains a list of
cube filename to be used to create the control network.
Type
| filename |
File Mode
| input |
Filter
|
*.lis
|
Files:
SEEDDEF
Description
Use this parameter to select the filename which contains the
definition of the type of autoseeding to be preformed. This file
must contain a valid Autoseed plugin definition in PVL format.
Type
| filename |
File Mode
| input |
Filter
|
*.api
|
Files:
TO
Description
This file will contain the autoseeded control network
Type
| filename |
File Mode
| output |
Control:
NETWORKID
Description
The ID or name of this particular control network. This string
should be unique.
Control:
POINTID
Description
A string with one and only one set of question marks ("?").
This string will be used to create unique IDs for each control
point created by this program. The question marks will be replaced
with a number beginning with zero. For example the pattern
"User????" would create point IDs "User0001" through
"User9999". Note: Make sure there are enough "?"s for all the control
points that may be created during this run. If all question marks are
exausted the program will throw an error.
Control:
DESCRIPTION
Description
A string describing purpose of this control network.