![](https://webarchive.library.unt.edu/eot2008/20081111050150im_/http://www.epa.gov/epafiles/images/epafiles_misc_space.gif) |
![](https://webarchive.library.unt.edu/eot2008/20081111050150im_/http://www.epa.gov/epafiles/images/epafiles_misc_space.gif) |
Consumer Factsheet on: SIMAZINE
List of Contaminants
As part of the Drinking Water and Health pages, this fact sheet is part of a larger publication: National Primary Drinking Water Regulations
This is a factsheet about a chemical that may be found in some public or private drinking water
supplies. It may cause health problems if found in amounts greater than the health standard set by
the United States Environmental Protection Agency (EPA).
What is Simazine and how is it used?
Simazine is an organic white solid, used as a pre-emergence herbicide used for control of
broad-leaved and grassy weeds on a variety of deep-rooted crops such as artichokes, asparagus,
berry crops, broad beans, citrus, etc., and on non-crop areas such as farm ponds and fish
hatcheries. Its major use is on corn where it is often combined with AAtrex. Other herbicides with
which simazine is combined include: paraquat, on apples, peaches; Roundup or Oust for noncrop
use; Surflan on Christmas trees; Dual on corn and ornamentals.
The list of trade names given below may help you find out whether you are using this chemical at
home or work.
Trade Names and Synonyms:
Aktinit
Batazina
Bitemol
CAT(Herbicide)
CDT
Cekuzina-S
Geigy 27,692
Gesatop
Herbazin
Herbex
Hungazin
Premazine
Primatol S
Pricep
Printop
Radocon
Simadex
Tafazine
Zeapur
Why is Simazine being Regulated?
In 1974, Congress passed the Safe Drinking Water Act. This law requires EPA to determine safe
levels of chemicals in drinking water which do or may cause health problems. These
non-enforceable levels, based solely on possible health risks and exposure, are called Maximum
Contaminant Level Goals.
The MCLG for simazine has been set at 4 parts per billion (ppb) because EPA believes this level
of protection would not cause any of the potential health problems described below.
Based on this MCLG, EPA has set an enforceable standard called a Maximum Contaminant Level
(MCL). MCLs are set as close to the MCLGs as possible, considering the ability of public water
systems to detect and remove contaminants using suitable treatment technologies.
The MCL has also been set at 4 ppb because EPA believes, given present technology and
resources, this is the lowest level to which water systems can reasonably be required to remove
this contaminant should it occur in drinking water.
These drinking water standards and the regulations for ensuring these standards are met, are
called National Primary Drinking Water Regulations. All public water supplies must abide by
these regulations.
What are the Health Effects?
Short-term: EPA has found simazine to potentially cause the following health effects when people
are exposed to it at levels above the MCL for relatively short periods of time: weight loss,
changes in blood.
Long-term: Simazine has the potential to cause the following effects from a lifetime exposure at
levels above the MCL: tremors; damage to testes, kidneys, liver and thyroid; gene mutations;
cancer.
How much Simazine is produced and released to the environment?
The amount of simazine used annually in the USA was estimated in 1985 to be 4.8 billion pounds.
Simazine may be released into the environment via effluent at manufacturing sites and at points of
application where it is employed as a herbicide.
What happens to Simazine when it is released to the environment?
If released to water, simazine will not bind to sediments or evaporate. It may leach to ground
water. Its persistence varies from a few months to a few years, depending mainly on the rate of
degradation by microbes. Simazine has a low potential to bioaccumulate in fish.
How will Simazine be Detected in and Removed from My Drinking Water?
The regulation for simazine became effective in 1994. Between 1993 and 1995, EPA required
your water supplier to collect water samples every 3 months for one year and analyze them to find
out if simazine is present above 0.07 ppb. If it is present above this level, the system must
continue to monitor this contaminant.
If contaminant levels are found to be consistently above the MCL, your water supplier must take
steps to reduce the amount of simazine so that it is consistently below that level. The following
treatment methods have been approved by EPA for removing simazine: Granular activated
charcoal.
How will I know if Simazine is in my drinking water?
If the levels of simazine exceed the MCL, 4 ppb, the system must notify the public via
newspapers, radio, TV and other means. Additional actions, such as providing alternative
drinking water supplies, may be required to prevent serious risks to public health.
Drinking Water Standards:
Mclg: 4 ppbMcl: 4 ppb
Learn more about your drinking water!
EPA strongly encourages people to learn more about their drinking water, and to support local
efforts to protect and upgrade the supply of safe drinking water. Your water bill or telephone
book's government listings are a good starting point.
Your local water supplier can give you a list of the chemicals they test for in your water, as well
as how your water is treated.
Your state Department of Health/Environment is also a valuable source of information.
For help in locating these agencies or for information on drinking water in general, call: EPA's
Safe Drinking Water Hotline: (800) 426-4791.
For additional information on the uses and releases of chemicals in your state, contact the:
Community Right-to-Know Hotline: (800) 424-9346.
List of Contaminants
|