Spray Gun Cleaning Best Practices Checklist

OK	Needs Work	N/A	Element	Implementation Notes
INSTALL AND USE AN AUTOMATED GUN CLEANING UNIT¹
Reduces employee exposure (skin contact and inhalation) to gun cleaning solvent and paint Reduces solvent waste and saves money on waste disposal fees Cuts down on solvent use and saves money on virgin solvent
Existing gun cleaning unit:			Enclosed basin Parts sink Ventilated Other:___________________________________
			Enclose/cover gun cleaning unit when possible
			Use automated cycle where possible
			If vented, exhaust vapors out of work area
			Preclean gun to remove gross contamination and extend service life

¹Required element of the City of Philadelphia Department of Public Health, Air Management Regulation V.

OK	Needs Work	N/A	Element	Implementation Notes
MAINTAIN GUN CLEANING UNIT
Improves solvent performance Reduces worker exposures Prevents solvent loss from evaporation or leaks
Solvent replacement: In-house Outside service System in good condition: Yes No
			Replace solvent routinely (at least once a month)
			Ensure hoses and unit are intact
			Ensure lid seats properly

OK	Needs Work	N/A	Element	Implementation Notes
USE PROPER RESPIRATORY PROTECTION¹
Reduces employee inhalation exposures to solvent vapors
Type of respirator used:			½ mask APR Full facepiece APR None Other:______________________________________
Type of cartridge used:			Organic vapor Other:______________________________
			Consistently use half-mask APR w/organic vapor cartridge or better when cleaning spray guns or when working near the cleaning unit. (See guidance on respiratory protection programs and a list of respirator manufacturers and suppliers in the Health and Safety Management Section of your kit.)

¹Required element of OSHA where contaminant levels exceed the Permissible Exposure Limit (PEL).

OK	Needs Work	N/A	Element	Implementation Notes
WEAR CHEMICAL PROTECTIVE GLOVES AND EYEWEAR¹
Reduces employee skin exposure to solvents
Type of gloves worn:			Nitrile Butyl rubber PVA Latex* None Other:___________________________________________
How often are gloves changed?			After each task Several times per day, but not after each task Once or twice per day Other:___________________________________
Protective eyewear used?			Yes No
			Consistently wear proper gloves when working with paints and solvents (check with glove manufacturer for suggested glove types - see a list of protective glove manufacturers and suppliers in the Health and Safety Management section of your kit)
			Ensure gloves are in good condition and free of tears or punctures
			Wear proper eye protection

*Latex gloves do not provide protection against most solvents used in auto refinishing shops.

¹Required element of OSHA's Personal Protective Equipment (PPE) standard (29 CFR 1910.132).