|
publications > wri > 94-4010 > appendix: inventory of wells used in this report
Hydrogeology and the Distribution and Origin of Salinity in the Floridan Aquifer System, Southeastern Florida
WRI 94-4010
Appendix: Inventory of Wells used in this Report
[Well locations shown in figure 1. Local well identifier used for this report only. Site identification: first six digits are the latitude, next seven digits are the longitude, and last two digits are a sequential number; this number should not be used for the latitude-longitude location of a well (the number is assigned by the U.S. Geological Survey (USGS) for identification purposes in the Ground-Water Site Inventory (GWSI) system. AMP (altitude measuring point): AMP is at land surface for all wells, except C-962, G-3234, G-3235, G-3239, G-3240, MO-141, and S-479; AMP is above land surface for these wells. Type of openings: P, perforations shot through casing and cement (no gravel pack); 5, gravel-packed interval (with screen or slotted or perforated liner); and X, open hole. Date at end of construction: P, date of plugging and abandonment; *, second construction date (the abandonment date is not known for some plugged and abandoned wells). WWTP, Wastewater Treatment Plant; WTP, Water Treatment Plant; --, no data]
Follow the links below for inventory of wells:
< Go Back: References Cited | Next: Appendix (cont'd): well inventory >
|