[Code of Federal Regulations] [Title 40, Volume 28] [Revised as of July 1, 2004] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR464.01] [Page 550-551] TITLE 40--PROTECTION OF ENVIRONMENT CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 464_METAL MOLDING AND CASTING POINT SOURCE CATEGORY--Table of Contents Sec. 464.01 Applicability. General Provisions Sec. 464.01 Applicability. 464.02 General definitions. 464.03 Monitoring and reporting requirements. 464.04 Compliance date for PSES. Subpart A_Aluminum Casting Subcategory 464.10 Applicability; description of the aluminum casting subcategory. 464.11 Specialized definitions. 464.12 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. 464.13 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. 464.14 New source performance standards. 464.15 Pretreatment standards for existing sources. 464.16 Pretreatment standards for new sources. 464.17 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology. [Reserved] Subpart B_Copper Casting Subcategory 464.20 Applicability; description of the copper casting subcategory. 464.21 Specialized definitions. 464.22 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. 464.23 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. 464.24 New source performance standards. 464.25 Pretreatment standards for existing sources. 464.26 Pretreatment standards for new sources. 464.27 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology. [Reserved] Subpart C_Ferrous Casting Subcategory 464.30 Applicability; description of the ferrous casting subcategory. 464.31 Specialized definitions. 464.32 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. 464.33 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best [[Page 551]] available technology economically achievable. 464.34 New source performance standards. 464.35 Pretreatment standards for existing sources. 464.36 Pretreatment standards for new sources. 464.37 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology. [Reserved] Subpart D_Zinc Casting Subcategory 464.40 Applicability; description of the zinc casting subcategory. 464.41 Specialized definitions. 464.42 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. 464.43 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. 464.44 New source performance standards. 464.45 Pretreatment standards for existing sources. 464.46 Pretreatment standards for new sources. 464.47 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology. [Reserved] Authority: Secs. 301, 304 (b), (c), (e), and (g), 306 (b) and (c), 307, 308, and 501 of the Clean Water Act (Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) (the ``Act''); 33 U.S.C. 1311, 1314 (b), (c), (e) and (g), 1316 (b) and (c), 1317 (b) and (c), 1318, and 1361; 86 Stat. 816, Pub. L. 92- 500; 91 Stat. 1567, Pub. L. 95-217. Source: 50 FR 45247, Oct. 30, 1985, unless otherwise noted. General Provisions (a) This part applies to metal molding and casting facilities that discharge or may discharge pollutants to waters of the United States or that introduce pollutants into a publicly owned treatment works.