[Code of Federal Regulations] [Title 40, Volume 17] [Revised as of July 1, 2004] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR86.098-14] [Page 377-378] TITLE 40--PROTECTION OF ENVIRONMENT CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 86_CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES--Table of Contents Subpart A_General Provisions for Emission Regulations for 1977 and Later Sec. 86.098-14 Small-volume manufacturers certification procedures. Section 86.098-14 includes text that specifies requirements that differ from Sec. Sec. 86.094-14 or 86.095-14. Where a paragraph in Sec. 86.094-14 or Sec. 86.095-14 is identical and applicable to Sec. 86.098-14, this may be indicated by specifying the corresponding paragraph and the statement ``[Reserved]. For guidance see Sec. 86.094- 14.'' or ``[Reserved]. For guidance see Sec. 86.095-14.''. (a)-(c)(7)(i)(C)(3) [Reserved]. For guidance see Sec. 86.094-14. (c)(7)(i)(C)(4) For light-duty vehicle, light-duty truck, and heavy- duty vehicle evaporative and/or refueling emissions (as applicable) and for light-duty truck, and heavy-duty engine exhaust emissions, deterioration factors shall be determined in accordance with Sec. 86.098-24. (c)(7)(ii)-(c)(11)(ii)(B) introductory text [Reserved]. For guidance see Sec. 86.094-14. (c)(11)(ii)(B)(1) Engine evaporative/refueling family names and vehicle (or engine) configurations. (c)(11)(ii)(B)(2)-(c)(11)(ii)(B)(15) [Reserved]. For guidance see Sec. 86.094-14. (c)(11)(ii)(B)(16)-(c)(11)(ii)(B)(18) [Reserved]. For guidance see Sec. 86.095-14. (c)(11)(ii)(B)(19) For each light-duty vehicle, light-duty truck, or heavy-duty vehicle evaporative/refueling emission family, a description of any unique procedures required to perform evaporative and/or refueling emission tests (as applicable) (including canister working capacity, canister bed volume, [[Page 378]] and fuel temperature profile for the running loss test) for all vehicles in that evaporative/refueling emission family, and a description of the method used to develop those unique procedures. (20) For each light-duty vehicle, light-duty truck, or heavy-duty vehicle evaporative/refueling emission family: (i) Canister working capacity, according to the procedures specified in Sec. 86.132-96(h)(1)(iv); (ii) Canister bed volume; and (iii) Fuel temperature profile for the running loss test, according to the procedures specified in Sec. 86.129-94(d). (c)(11)(ii)(C)-(c)(11)(ii)(D)(5) [Reserved]. For guidance see Sec. 86.095-14. (c)(11)(ii)(D)(6) [Reserved]. (c)(11)(ii)(D)(7)-(c)(15) [Reserved]. For guidance see Sec. 86.094- 14. [59 FR 16289, Apr. 6, 1994]