[Code of Federal Regulations] [Title 40, Volume 27] [Revised as ofJuly 1, 2003] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR428.85] [Page 77] TITLE 40--PROTECTION OF ENVIRONMENT CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 428--RUBBER MANUFACTURING POINT SOURCE CATEGORY--Table of Contents Subpart H--Wet Digestion Reclaimed Rubber Subcategory Sec. 428.85 Standards of performance for new sources. The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: ------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed- - ------------------------------------------------------------------------ Metric units (kg/kkg of product) ------------- COD....................................... 14.7 6.11 Oil and grease............................ 0.40 0.144 TSS....................................... 1.04 0.52 pH........................................ (\1\) (\1\) ------------- English units (lb/1,000 lb of product) ------------- COD....................................... 14.7 6.11 Oil and grease............................ 0.40 0.144 TSS....................................... 1.04 0.52 pH........................................ (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range 6.0 to 9.0.