[Code of Federal Regulations] [Title 40, Volume 27] [Revised as ofJuly 1, 2003] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR426.24] [Page 31] TITLE 40--PROTECTION OF ENVIRONMENT CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 426--GLASS MANUFACTURING POINT SOURCE CATEGORY--Table of Contents Subpart B--Sheet Glass Manufacturing Subcategory Sec. 426.24 Pretreatment standards for existing sources. Any existing source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403. In addition, the following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties controlled by this section which may be discharged to a publicly owned treatment works by a point source subject to the provisions of this subpart. ------------------------------------------------------------------------ Pollutant or pollutant property Pretreatment standard ------------------------------------------------------------------------ pH........................................ No limitation. TSS....................................... Do. ------------------------------------------------------------------------ [40 FR 6444, Feb. 11, 1975, as amended at 60 FR 33958, June 29, 1995]