[Code of Federal Regulations] [Title 40, Volume 27] [Revised as ofJuly 1, 2003] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR426.16] [Page 30] TITLE 40--PROTECTION OF ENVIRONMENT CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 426--GLASS MANUFACTURING POINT SOURCE CATEGORY--Table of Contents Subpart A--Insulation Fiberglass Subcategory Sec. 426.16 Pretreatment standards for new sources. Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403. (a) Applicability. The provisions of this section shall apply to discharges of process waste water pollutants into publicly owned treatment works except for that portion of the waste stream which constitutes cullet water. (b) [Reserved] [39 FR 2565, Jan. 22, 1974, as amended at 60 FR 33958, June 29, 1995]